similar to: PCI passthrough working on Xen 3!

Hi, I''ve set up a domU with video card access per the instructions at <http://www.nvnews.net/vbulletin/showthread.php?t=68703>; video is working quite nicely. However, I''m having some trouble getting the USB keyboard and mouse to work. I have a motherboard with onboard USB 2.0, and a USB 1.1 PCI card. The motherboard USB uses several PCI addresses. If I

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

Hi, is it possible to use a usb isdn modem in a guest, I''m using the standard xen on SLES10. Which changes should I make in the guest config file? The modem is a usb isdn modem from fritz. Regards Marcus _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

hi list, I am happy being able to report, that I got winxp finally to run on my system. I have an ASUS T5600 Core 2 Duo with 1 Gig memory and SATA. Until the todays "apt-get dist-upgrade" I was''t able to get any graphical output out of the SDL-Window, but now it is thete and simply works, wonderful ! I attached my system info. Big thank to the xen-team and the debian people !

I''ve been trying for several days to get a xen dom0 booting as described on Boris Derzhavets blog. I have been able to boot Jeremy Fitzhardinge''s pv_ops kernel under xen, but my X server wouldn''t start so I''ve been trying to get Andrew Lyon''s rebased opensuse patches to work. I have asked for help in the freenode ##xen channel but they

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

Hi there, I have a question regarding PCI passthrough on the Citrix XenServer 5.6 (Xen 3.4.2). I already managed to get some soundcard passed through to a Windows guest. So I think my knowledge about that topic isn''t _that_ low. But I cannot seem to pass through a SATA/PATA controller to a Linux guest. I have some additional CD/DVD burner (PATA) attached to a SATA/PATA controller

Hello everybody, I''m experiencing some problems while exporting a whole usb hub to my DomU. My Dom0 is a Debian Etch using Xen 3.2 and kernel 2.6.18-5-xen-686 SMP on an intel core 2 duo. My DomU is a CentOs 5.1 using same kernel. Both are 32 bits environnements. I''ve exported my Usb Hub, and a ethernet card, using the pciback.hide=(04:00.0)(00:1d.0) option to Dom0 kernel. I

This issue was brought up about a year and a half ago. So I''ll bring it up again and see if anything happens. I''ve got an infiniband network and am attempting to pass the infiniband card through the host and give it to the guest. I''m working with standard CentOS 5.2 on both guest and host with their provided xen (3.0.3 ish). I''ve also attempted to install the

This issue was brought up about a year and a half ago. So I''ll bring it up again and see if anything happens. I''ve got an infiniband network and am attempting to pass the infiniband card through the host and give it to the guest. I''m working with standard CentOS 5.2 on both guest and host with their provided xen (3.0.3 ish). I''ve also attempted to install the

Hi! I am trying to export a PCI device (an AVM Fritzcard PCI ISDN card...) to a domU but when starting my domU I am getting this error: "pciback pci-4-0: 22 Couldn''t locate PCI device (0000:00:06.0)! perhaps already in-use?" My system is running both debian etch in dom0 and domU... Below you can find (hopefully) all important information... Sincerely, Gaubatz Patrick

Package: xen-hypervisor-3.4-amd64 and linux-image-2.6.32-5-xen-amd64 Version: 3.4.3-1 and 2.6.32-15 Hello all, GRUB-PC does not automatically populate Xen related parameters in /boot/grub/grub.cfg so I added them manually (see below). All the packages involved on my Dell PowerEdge R710 running Debian GNU/Linux Squeeze AMD64 are from the Squeeze repository. There are four (4) 1TB SATA HDD

guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg

Did a ''git pull'' a few minutes ago and tried to rebuild my kernel and was given this error: make CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-x86 CALL scripts/checksyscalls.sh CHK include/linux/compile.h CC drivers/acpi/acpica/hwsleep.o drivers/acpi/acpica/hwsleep.c: In function

Hi all, I recently bought a Intel D2500HN motherboard with Intel GMA 3600 video card. I want to install FreeBSD 9-Release on it via PXE, but after booting the system, it seems that video card driver doesn't work properly. Have a look at this picture: http://img703.imageshack.us/img703/5648/20120714393.jpg I've tried the # vidcontrol 80x25 but unfortunately it doesn't help. Do

I have an IBM System x 3250 that successfully boots using the standard kernel (2.6.18-8.1.10.el5) but fails to boot with the xen kernel. The kernel appears to fail when it attempts to initialize the driver for the onboard SAS controller (LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS). Can anyone provide any advice? Here's the relevant info. Please let me know if any other

Hi, i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19 with xen-4.0.1rc5. Due some reason the system freezes from time to time. I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn''t write anything to serial console so there are no errors or something like that. Perhaps there is something to see from the logs ... Hardware Board: Intel DQ45CB CPU:

Hello. Trying 3.0.3 xen with hvm virtualization it run into an issue that an win 2003 host does install in text mode, but after first reboot only a black screen is greeting me ( after 2 noticable resolution changes ). Win 2000 works fine. hvm config: import os, re arch = os.uname()[4] if re.search(''64'', arch): arch_libdir = ''lib64'' else:

lspci dont show Digium card. The motherboard is Intel 945gnt. 00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02) 00:02.0 Display controller: Intel Corporation 945G Integrated Graphics Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev

Hi, I am having periodic sound clicks (2-3 per second) on all FXS of a TDM400P when the remote end is my VoIP provider. However: - recording the conversation on the asterisk, does not have the glitches, although I can hear them on a real phone. - My VoIP provider to my VoIP phones through the same asterisk is OK. - TDM to TDM through the same asterisk is OK. I tried with and without