similar to: Wireless support in XEN

I have built my own wireless AP with Ubuntu 7.10 and an Atheros-based wireless card. My problem is that I can't access any of the Samba shares with my wireless clients...they can all search for the server, get prompted for a login then it just hangs and eventually times out. The same clients, when using their LAN ports to connect to the same server, are able to do everything--browse and

I rebuilt my notebook that has the atheros card in it, and forgot to save all of my setup to get it working. I am using dkms and the madwifi rpms from rpmforge. My modprobe.conf has a line: alias wifi0 ath_pci I can ifconfig wifi0 up But the command: /usr/sbin/wpa_supplicant wpa_supplicant -dd -D madwifi -i wifi0 -c /etc/wpa_supplicant/wpa_supplicant.conf fails. Now some of my old

hi friends, i am sending this to centos mailinglist as i didnt solved problem and guys from madwifi are probably dead, as they are not giving me any reply . Thanks D. ---------- Forwarded message ---------- From: David Hl??ik <david at hlacik.eu> Date: Wed, Mar 19, 2008 at 11:39 AM Subject: ath_pci in modprobe.conf on Centos/Fedora To: madwifi-users at lists.sourceforge.net Hi friends,

I am doing some testing of openwrt'd wireless access points, using madwifi-ng'd atheros radios. In the test configuration, I have three devices in a triangle, each has wds links to the other two devices. The ath0 interface is in ap mode, ath1 is a wds link to one device, and ath2 is a wds link to the other device. All three interfaces (and an ethernet interface) are in a bridge (br-lan)

hi, i'm woo, I'm a newer to CentOS. I installed my CentOS5.3(2.6.18-128.el5) in VMware. And my wireless card is MERCURY 54U(Atheros AR5xxx).I plugged the USB card into my virtual machine, but it couldn't be found. I've tried two drivers in different time: 1)install ath5k: -------------------------------------------------------------------------------- [root at wulmcent ~]# lsmod

I am using the madwifi driver with the patch to allow changing of the MAC address and I have two other ethernet interfaces plus a pppoe interface. My outbound connection is ppp0. I have ath0, eth1, eth2 for internal interfaces. I have added these three interfaces to br0. Once the traffic leaves the linux router, it gets NAT'd and goes out through ppp0. All traffic on all segments works

I went to the wiki and searched for both wireless and wifi and did not find anything related to wireless cards in CentOS. I think it would be stellar to have something similar to the laptops page but for wifi chipsets. I would propose it have three categories: FOSS chipsets Native driver but not FOSS chipsets (ie atheros via madwifi) NDIS Wrapper FSF has compiled somewhat of a list at

Interesting situation: First my system - HP NC4010, with Atheros pci mini card. Latest MadWiFi drivers from: http://atrpms.net/dist/el4/madwifi/ and wpa from: http://atrpms.net/dist/el4/wpa_supplicant/ I had just the madwifi working back in Jul at the IETF conference. But as open only. I had upgraded to the plus kernel, thinking it would get my internal SD card reader working (it

Hi, after some time without FreeBSD I installed 7.1 on an IBM Thinkpad T30 (with ZFS root on encrypted geli, works great). Config is: FreeBSD hasking.alashan.nongo 7.1-STABLE FreeBSD 7.1-STABLE #3: Thu Feb 5 21:10:45 CET 2009 root@hasking.alashan.nongo:/usr/obj/usr/src/sys/HASKING i386 I tried using my ath based D-Link DWL G650, which still seems to have some issues in regard to interrupt

I have a page where I document getting the increasingly popular AR5007EG Atheros wireless card working. (This is the card used in the Asus EEE PC). The current article covers several distributions, but would be modified to just cover CentOS. It does, however, involve getting third party software, as the rpmforge repos don't have the necessary drivers. (Apparently, it's a bit of a

Hi list, The crux of my setup is given in the Subject: field. I''m using Xen 3.0.3 (release) on a VIA Nehemiah chipset with Linux 2.6.16.29 in both dom0 and domU. Because the documentation on PCI passthrough is a bit sparse, I''m turning to the mailing list.. hopefully you guys have some input. My goal is to set up a system where: * 1 domU VM runs at a time. * The VM can be

Hello, I just installed Centos 5.2 on my wife's IBM thinkpad T41 with Atheros wireless. It looks like I need to install madwifi to get the wireless to work. Our home wireless network uses WPA2 I found the EL5 rpms at atrpms, but there is no madwifi-kmdl rpms for kernel 2.6.18-92.1.6.el5. So, to get the wireless working on my home network, what's the shortest path from here? Install

I took the dive and installed the CentosPlus kernel. I remembered that I could always boot with the old kernel if things went south. But on reboot, kudzu wanted to delete the Atheros config. I told it not to, but.... Would a simple 'freshen' of madwifi-0.9.1-24.el4.at.i386.rpm ? an rpm -qa |grep wifi returns: madwifi-kmdl-2.6.9-34.0.2.EL-0.9.1-24.el4.at madwifi-0.9.1-24.el4.at

Hi I got myself a nice little R52 802.11a/b/g MiniPCI Card for our router. This card is using the Atheros AR5141 chipset. I searched everywhere to find out more info on this and came across a few pages where it said that the AR5141 chipset is supported but when I stick the card in the router and boot FreeBSD 7-STABLE it hangs when loading the Atheros drivers It stops right after this ath0:

I remember being a small part of and following this thread a few months ago. <http://lists.centos.org/pipermail/centos/2006-May/065091.html> I've been attempting a go at getting wpa_supplicant running on CentOS 4.3 and haven't had much luck. I'm assuming my failure is my lack of knowledge on the subject, but anyways. First, my normal setup is as follows: IBM Thinkpad R40

I have a atheros wiifi card on my Centos 5 that I use as a access point using hostapd. I noticed that after the upgrade to kernel 2.6.18-128 or above, the atheros driver comes with the kernel, ath5k, and it does?t let hostpad ou iwconfig set master mode on the card. Up to kernel 2.6.18-92 is workedd just fine using madwifi from rpmforge. Any ideas on that? Tks.

What's the easiest path to having my Atheros wireless cards supported, particularly in C5? In the past, I've chosen to download source and build my own, but that's become a little tiresome. At one point, OpenSUSE was the easy option, but since 10.1 it's dropped madwifi. -- Cheers John -- spambait 1aaaaaaa at coco.merseine.nu Z1aaaaaaa at coco.merseine.nu Please do not

Hello Sam, I've got a Fujitsu Siemens Amilo Pro V3515 laptop, with a builtin autheros-wifi card, but I can't get it working. I am running FreeBSD 7.0-STABLE, I don't know whether it works in -CURRENT. Over here I have the dmesg: http://junk.quis.cx/VNViVksv/blackbox.dmesg.txt I haven't compiled it in, it didn't boot that way (kernel panic iirc). When I kldload if_ath I get

On Thu, 21 Jul 2005 16:54:06 +0200 Christophe GRANSART <christophe.gransart@inrets.fr> wrote: > Hello, > > Some feedback about bridge-utils on FC4 : > > i tried bridge-utils 1.0.4 and 1.0.6 on FC4 2.6.12-1.1398_FC4 > On a dell D800 > With eth0 : Broadcom NetXtreme BCM5705M Gigabit Ethernet > and ath0 : DLink DWL-AG650 driver madwifi > > On both 1.0.4 and

Hi all, I am running samba 3.0.14 on ubuntu breezy badger networked with another ubuntu machine and my XP laptop. File sharing is great except when a file exceeds 1.5 - 2 GB. The file transfer fails after 1.5 - 2 GB with a file to large error. This seems to be a limit for linux - windows and linux - linux which is a pain when trying to move large DVD iso's. Does anyone know a