similar to: Xen in a routed network environment?

I now this may be a touchy subject, but I'll preface by saying that I'm trying to get away from Real Networks. Now that video is becoming a reality with Icecast, I want to make a slow transition from using RealServer to using Icecast. I have 20GBs of video content in Real format so I need to keep using the RealServer, but I want to start running the live audio stream with Icecast. Has

If I relay through my Cisco 7940/7960, does it do QOS, even with a dumb switch? I know you can set quality/qos but only if you have a layer2/layer3 switch that supports the tagging. A simple little linksys 5 port switch wouldn't know about QOS, it'd give everybody equal priority. If a computer plugged into the phone, and the phone into the dumb 5 port switch and then to the internet,

Hi, I need to make a cluster classification by the unique values of the data frame. I explain the problem. I need to classify this table, and assign to the same cluster each row that has the same combination of value: > data1 layer_1 layer_2 layer_3 [1,] 0.2460000000 2 -0.1 [2,] 0.5460000000 3 -0.1 [3,] 0.2460000000 2 -0.1 [4,]

Hello Icecast group, I have a problem with compiling lame or other programms, I get always the message from stupid libtool libtool is installed, I use Solaris9 (sunOS 5.9) has any person a idea? thank you for help Daniel # make cd . \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ /bin/bash ./config.status config.status: creating config.h config.status: config.h is unchanged

> Given my experience of running multiple streams on an > old 486, I'd say you will run out of bandwidth before you > overpower the server. Bandwidth is indeed the biggest resources. We used dual CPU p3-600's at icast. We had 4 machines and we built it to easily handle 12,000 listeners over 500 streams. Only 3 were active at any one time ( the 4th was failover ). CPU load

On Wed, 2003-09-03 at 21:58, Erlend Simonsen wrote: > Hirendra Hindocha <hiren_hindocha@comcast.net> writes: > >> > >> > >> No. icecast2 is a streaming server, so it... streams. > >> > > > > Good point. I wonder how the other servers (Real Server ,Quicktime etc) do it. > > Any inputs on any other streaming servers that lets a

Hello to all I would like to know If some of you have already configured an Cisco IP Phone (7940 or 7960) to work in a different VLAN than the PC that is connected through the phone switch? I know that this can be done with the Skinny firmware, but I dont if it works with the SIP firmware. The Cisco technical staff told me that these phones dont support 802.1x but can work as pass-through.

Does anybody know if the 3com NBX 100 phones will work with Asterisk? The phones require a boot image to be sent either through layer2 or layer3 before they will function properly after being powered on each time. Thanks.

Hi After modprobe hisax type=35 (Billion HFC PCI) on a Xorcom Rapid ISO I get: HISAX Dec 12 16:25:35 localhost kernel: HiSax: Linux Driver for passive ISDN cards Dec 12 16:25:35 localhost kernel: HiSax: Version 3.5 (module) Dec 12 16:25:35 localhost kernel: HiSax: Layer1 Revision 1.1.4.1 Dec 12 16:25:35 localhost kernel: HiSax: Layer2 Revision 1.1.4.1 Dec 12 16:25:35 localhost kernel: HiSax:

Every time I touch something, pieces fall off! It's a good thing this stuff isn't in production yet (for me I mean). So I had an LVS, configured with Piranha, directing http test transactions across two servers. I used Piranha to add another realserver. It appeared in the lvs.cf file, but didn't appear in the ipvsadm output. So I stopped and restarted Pulse. And now *none* of the

Hi all. I'm trying to bring an Amazon VM into the LAN by following this guide [0]. However, it appears that OpenSSH on either RHEL7 or CentOS7 is broken as it is not creating tap interface but tun interface. I've tried this on both CentOS5 and CentOS6 and they both work as advertised! Downgrading the OS is not an option! CentOS5/6 gives me: ****************** tap1:

Package: src:xen Version: 4.17.3+10-g091466ba55-1~deb12u1 Severity: wishlist I wasn't sure if this script comes from Debian or Xen or somewhere else, so I thought it safest to report it here. /etc/xen/scripts/vif-bridge handles MTU settings in the vif, but the otherwise similar /etc/xen/scripts/vif-openvswitch does not. I added it in, here's the diff-c and the full fixed file is also

HI: Is there any way to raise up sound volume on fxo on TDM04B without changing tx-gain and rx-gain ? __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Rob Burris wrote: > Real Networks offers a free streamer called Real Server. I'm not sure of the > exact link, but here's a starting point That is definitely not free, it's not even zero cost after that evaluation year. There don't even exist any players for it except from Real ... i can't think of anything less free than that. :| I suggest ditching all that crap and to

After reading through an older thread on this list (streaming ogg audio), I was wondering if would be possible in the future to use OggVorbis and Icecast as a replacement for RealAudio and RealServer. By this I'm not talking about simple live http/tcp streaming, but on-demand rtsp/udp streaming where a user could open a player and instantly jump to a location in a file, or click a link in a

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

Hi! Some - few - providers are using IAX2 as a protocol. Most are using SIP. I know that there are advantages of IAX2 regarding multiple connections. But beside this I'm asking myself (and you all) why I should prefer IAX2 when my SIP connection is working. Are there differences in the performance? Bye! Michael

Hey gang, We have about 30 Cisco 79XX phones all running latest 7.5 SIP. We are also using all Cisco Switches and Routers. Everything works great except that when you reboot a phone it takes like 3-5 minutes for it to come up. The phones spend tons of time 'Configuring VLAN..' We don't run any VLANs. Is there some way to skip this? In the 'Network Settings' I have

Hello, I just got my isdn-card working together with i4l and asterisk. Everything seems to be working fine: I can accept calls coming from the outside and I can dial out. Even setting the msn works like charm but my problem is that I cannot hear a word. There's complete silence in both directions. Any idea what could be the cause? Thanks for your help, Gunther Lspci: 0000:01:07.0 Network

Hi all, I have a server with an Athlon 64 3200 and Fedora Core 2 x86_64. I have compiled and installed Asterisk 1.0.6 without any problems. When I try to make asterisk-addons-1.0.6 it say me: [root@server1 asterisk-addons-1.0.6]# make ./mkdep -fPIC -I../asterisk -D_GNU_SOURCE -I/usr/include/mysql `ls *.c` make -C format_mp3 all make[1]: Entering directory