similar to: ServeRAID 4Lx - Plain 2.6.12.6 works - Xen not

Hi, I'd like to monitor the disks connected to a ServeRaid-8k controller in a server running Centos 7 such that I can know when one fails. What's the best way to do that?

Hi there, I'm in the process of installing Centos 5.2 on an IBM x236 w/ ServeRAID 7k I recently acquired to act as a samba file server. The hardware has all passed various stress tests I could throw at it so we're okay there. My question is. Has anyone had any luck getting the latest IBM ServeRAID Manager v9.0 working in CentOS? If so how? ServeRAID Manager is based off Adaptec's

I need to install CentOS 5.2 on a IBM Server xSeries 226, which comes with a IBM SERVERAID 6i RAID card. I think it is not a true hardware RAID card. I has, nevertheless, an interesting feature: 128MB of cache with battery backup. I launched the CentOS boot DVD and CentOS correctly identified the card and the RAID 5 array as configured by the controller's BIOS. My question now is:

Hi all, we are about to buy some IBM x3550 M2 servers with ServeRAID M5014 SAS onboard controller. Can anyone confirm that these controllers will work with CentOS 5.5 (seems to be some rebranded LSI controller). I cannot find any hint in the 2.6.18-194.3.1.el5 sources... Regards, Peter -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type:

On 3/14/19 2:31 PM, isdtor wrote: > >> I'd like to monitor the disks connected to a ServeRaid-8k controller in a >> server running Centos 7 such that I can know when one fails. >> >> What's the best way to do that? > > It's been a long time since I worked with ServeRaid, and things may have changed in the meantime. > > IBM used to have a an iso

> hwilmer wrote: >> >> I'd like to monitor the disks connected to a ServeRaid-8k controller in >> a server running Centos 7 such that I can know when one fails. >> >> What's the best way to do that? > > From a *really* short search, see it has a controller card If you do an > lspci, what does that tell you - is it yet another rebranded LSI card? If

Hi, I have just upgraded an IBM Xseries x225 server to CentOS 4.2 (from CentOS 3.6) and found out that write back cache is not enabled for the drive representing the RAID array. The RAID controller has 128 MB battery backed cache. Write back cache is enabled in the controller configuration (using the IBM boot cd) and verified using the IBM RaidManager utility, but the boot messages show that

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

> I'd like to monitor the disks connected to a ServeRaid-8k controller in a > server running Centos 7 such that I can know when one fails. > > What's the best way to do that? It's been a long time since I worked with ServeRaid, and things may have changed in the meantime. IBM used to have a an iso with ServeRaid related tools (ibm_sw_srapp_.....) that included Linux

IBM''s website says that Solaris 10u1 has them built in, Shouldn''t that mean they are in sNV too? I''m booting off the network and off DVD, and just before the installer starts I get a message about ''no disks found.'' Format does the same thing. What driver module should be used for the ServeRAID 7k. I did use the ServeRAID Support CD to define the

hwilmer wrote: > > I'd like to monitor the disks connected to a ServeRaid-8k controller in > a server running Centos 7 such that I can know when one fails. > > What's the best way to do that? >From a *really* short search, see it has a controller card If you do an lspci, what does that tell you - is it yet another rebranded LSI card? If so, MegaRAID. mark

Hi, Does anyone know how I can find out if an ibm serveraid 8k sas storage controller (zero channel RAID) is a real hardware RAID controller and supported in the standard CentOs kernel or is it a fake raid controller. I am trying to decide if I should get the serveraid controller or go get a 3ware controller. Regards, -- Tom Diehl tdiehl at rogueind.com Spamtrap address mtd123 at

Hi, I do seem to have a slight problem with upgrading two of our machines to CentOS (from SuSE, but that doesn't really matter). Both systems are IBM x-Series 360 with a ServeRaid controller for the "internal" hard disks an a QLogic QLA2200 fibre channel controller for an external stack of disks. On SuSE (kernel 2.4.26) the ServeRaid is controller 0 (resulting in the internal Raid

Does Centos include any runtime monitor/control software for raid arrays on AACRAID devices as on IBM 3650's? -- Les Mikesell lesmikesell at gmail.com

I have an opportunity to pick up a couple of NetFinity 5500's 4 way Xeon 550's w/ 2 gig RAM for very little $$$ I have seen this: http://www.mail-archive.com/asterisk-dev@lists.digium.com/msg00719.html In it, there is a passing remark to the Digium cards having problems with NetFinity's. Can anyone here comment on whether this is still an issue with * 1.0? It'd be a bummer if

Hi, I'm working on a Red Hat 7.3 based bootable cd. I have included a number of firmware update floppy images to it succesfully. However, I run into problems trying to build a floppy image for IBM ServerRAID firmware update. The firmware update disk set contains three disks. So their content does not fit into 1.44 nor 2.88 floppy images. To my understanding it possible to build a hard disk

On Feb 3, 2016, at 17:10, Warren Young wrote: > smartctl can see through several different types of RAID controller to the underlying physical disks via its -d option. This is what I have: # smartctl --all /dev/sda smartctl 5.43 2012-06-30 r3573 [i686-linux-2.6.32-573.12.1.el6.i686] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Vendor:

I'm running a CentOS 4 and smartd fails to start on boot the centos 4 smartd service doesn't support scsi ? <mailto:denis.machard at enst-bretagne.fr> Denis -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20061128/8f430d4c/attachment-0002.html>

GENERIC Kernel build failure just after stable-cvsup and buildworld. I have ensured that everything in /usr/obj was deleted before i began. Btw. /usr/obj <-- is a symlink to /Disk1/usrobj, because /usr partition was filled up. I have installed these packages from ports. db-2.7.7_1 The Berkeley DB package, revision 2 db3-3.3.11,1 The Berkeley DB package, revision 3

Edgar, thanks for the help! -------- Original Message -------- Subject: Re: Dovecot 2.2.16: disappearing messages, mismatched summaries, duplicated messages, excessive full re-downloads From: Edgar Pettijohn III <edgar at pettijohn-web.com> To: David Gessel <gessel at blackrosetech.com> Date: Sat Apr 18 2015 16:30:07 GMT+0300 (Arabic Standard Time) > > On Apr 18, 2015, at 8:00