similar to: Xen dom0 crash and reboot with 2.6.11-ksxen0

HI all, I am running FreeBSD 6.0-STABLE (of today) on a HP Pavillon (centrino based notebook with i915 graphic chipset). I am trying to use the latest drm hook for i915, but I get this error: drmsub0: <Intel i915GM> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 16 at device 2.0 on pci0 error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or

Hi, I am attempting to connect my dell SC420 to a 32" LCD at 1366x768. I have attached my currect config file and currect X start log. How do I massage the xorf file to run at the native resolution of the LCD? It currently runs but is in a virtual mode. The screen scrolls. Any help is appreciated. I am using Centos 4.1. Jerry -------------- next part -------------- An embedded and

I am attempting to setup a dell inspirons 1200 laptop media accelerator 900 from intel is the chipset so I am using the i810 driver. In the default 1024x768 everything is fine. I am trying to setup the external port not the LCD to be 1366x768. I added a modeline to xorg.conf of: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor"

I have an i810 chipset and am trying to set a custom mode. X is not taking that mode. Has anyone else run into this situation? How do I get X to take the mode on an i810 driver. Jerry

A playback of a mono vorbis track on a system using the i810 audio driver via ogg123 results in a double speed playback (chipmunk sound). It seems that this chipset doesn't support mono and while xmms seems to compensate for it, ogg123 doesn't I have a bugzilla report at redhat.com filed on this with more details https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=90433 Regards, Yusuf

Hi All, I'm experiencing odd behaviour with various OpenGL apps I'm (trying to) use. I have an IBM Thinkpad X60s with the Intel GMA chipset, the 945GM to be precise. I have glxinfo/glxgears working normally, disabled composite in xorg.conf and everything seems fine. However, there are a few applications that I use that show rather strange behaviour that I think is related to the same

In my SuSE updates this morning, I found "Bug fixes for i810/Radeon graphics drivers"... -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool Shoreline, \ http://shorewall.net Washington USA \ teastep@shorewall.net PGP Public Key \ https://lists.shorewall.net/teastep.pgp.key

This patchset moves legacy, non-KMS driver state from struct drm_driver into struct drm_legacy_state. Only non-KMS drivers provide an instance of the latter structure. One special case is nouveau, which supports legacy interfaces. It also provides an instance of the legacy state if the legacy interfaces have been enabled (i.e., defines the config option CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT) I

On Tue, Feb 25, 2020 at 10:59 AM Thomas Zimmermann <tzimmermann at suse.de> wrote: > > Non-KMS drivers store state in struct drm_driver. This bloats the > structure for KMS drivers and prevents it from being declared with > 'static const' qualifiers. Moving the non-KMS state into a separate > data structure resolves this. > > Signed-off-by: Thomas Zimmermann

Hi, I tried to run compiz on an intel i810 device (aiglx). According to the docs, I should: # LIBGL_ALWAYS_INDIRECT=TRUE compiz --replace --loose-binding gconf GLX_EXT_texture_from_pixmap is available with direct rendering. gtk-window-decorator: Could not acquire decoration manager selection on screen 0 display ":0.0" And 1. I get no window decorations at all 2. gtk-window-decorator

Hello, I'm new user of asterisk. Can anybody pls tell me how to use asterisk or any detail how to link???? i installed Asterisk-0.4.0 on i810 onboard sound card with Redhat 7.1. when i type "asterisk -vvvc" i get *CLI> prompt Prakash Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com Buy The Best In BOOKS at

What do you mean by write my code properly? With the way it's written right now it is encoding writing out to a stream and decoding from that stream but i'd like to use VBR but when i try it my app fails. and also on a different note I've written some test apps where it recordes from the mic encodes decodes then playes but when i try streaming it over the internet it has long

Hello, Not sure when it stopped working as I don't use it often. Maybe since the upgrade from 5.2 to 5.3. Can't say for sure as it's been a while since tried to start X. The errors I receive when startin X are: (EE) I810(0): unknown reason for exception (EE) I810(0): cannot continue (EE) I810(0): VBE initialization failed (EE) Screen(s) found but none have a usable configuration

Hi all, Up until today everything has been fine with CentOS on my Toshiba laptop. I booted into CentOS 4.3 today and Kudzu detected my video card for some reason. I let it configure it (wish I hadn't now). I can still get in. X and Gnome work. But the video resolution is 800x640. The LCD is capable of 1024x768. I cannot change it using Gnome tools or direct editing of

Hi, Just to say that this report may well seem a little sparse, but I really don't know what exactly to look for so if anybody needs extra information just shout and I will get it for you ASAP. When I check the X.org log file, it says direct rendering: enabled on my graphics device (it attaches its i810 driver to the kernel's i915 DRM device). This would appear to me to suggest that

Hi, we have some old dell optiplex 745 machines which have the Intel 965q chipset. The problem is, that they freeze as soon as the system tries to start the X system. It happens even before any log is written. This happens almost every time (for some reason it sometimes work, but 99% it fails). When i change the graphic driver in xorg.conf from intel to vesa it mostly works, but still i sometimes

hi, does anyone know how to change the setting of wine to make it faster? I am using Debian linux -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.winehq.org/pipermail/wine-users/attachments/20061103/7c32b16e/attachment.htm

Hi Folks, anyone out there successful in using the new xorg "intel" driver module on a 965Q-based motherboard with CentOS 5.2? The old "i810" and "vesa" work fine, I am looking for anyone else with experience with the new "intel" video driver in 5.2. The long of it: I have a customer's Dell Optiplex 745 (Core2 Duo 6300, 965Q chipset with integrated

It's not playing at half speed... It's playing at 2x speed. -Dragon Jean-Marc Valin wrote: > If it plays at half the speed, it means that either you're setting the > sampling rate wrong or (if you're using Linux) the machine at the other > end is using the broken i810 OSS audio driver which can't set itself to > mono. About writing code properly, just look at

Greetings everybody! For about two weeks I'm now a happy owner of an intel-powered laptop (chipset, wifi, gfx) and wanted to give it a full test-drive of compiz and other GL-intensive programs. The laptop runs Xorg 7.1.1 and the i810 driver that comes with it (stock rpm from FC6). I'm forced to start compiz 0.3.4 with these options... --use-cow --strict-binding --indirect-rendering