similar to: can boot custom kernel.

i saw a screen shot of knoppix beeing run under xen but for some reason i can''t do that. here if the config file i use. > kernel = "/boot/vmlinuz-2.6-xenU" > memory = 64 > name = "ttylinux" > nics = 1 > ip = "1.2.3.4" > disk = [''phy:hdc,hdd,r''] > root = "/dev/hdd ro" hdc is my cdrom and it was unmounted at

hi. since my failed adventured in xen 3 i decided to try out the xen 3 demo cd. i also used the test cd to run the test and submit the results. but now i can''t start the xen cd as well and its the same problem i had with the xen installation so i cam thinking it has something to do with my computer. this is what happens. the cd boots fine. but when it comes to the point of starting X

same as above. i compiled xen in ubuntu 5.10 and had amny problem and later found the guide given in ubuntu wiki tell to use this command make CC=gcc-3.4 meaning use gcc 3.4 instead of the gcc 4 that is standard on ubuntu. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

what is this error??? what does it mean. i have done xend start and even /etc/init.d/xend start. whats the poroblem. please help. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

this is in reference to the option in the grub lines. i have only 256 mb ram. so i can''t give the VMs more than a 100 mb. can i use swap as memory like in qemu. thank you _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello, I am getting kernel panic while trying to xm create a domU. Xen version 3.0 Linux kernel 2.6.12.6 Grub entry for dom0: title Xen 3.0 / XenLinux 2.6 kernel /boot/xen- 3.0.gz console=vga module /boot/vmlinuz-2.6-xen0 root=LABEL=/ ro console=tty0 module /boot/initrd-2.6.12.6-xen0.img For domU, my xm file contains: kernel = "/boot/vmlinuz-2.6.12.6-xenU "

Hi list, Here is the idea. I am running a domU out of a partition on a USB drive. I use the other partition to store the domU state. Then I carry this USB key to my office and restore the VM at the point where I left it. Thus I am trying to use xen''s virtualization to carry my desktop on a USB key. I have put up a web page explaining the details and a script to prepare the USB key.

Hello One and All, I am a Linux admin, new to asterisk. I have been assigned the task of setting up a dictation server for the company I work for. Our company is into transcription. Currently we are using dictation server, which is provided by another company. Now we have decided to have our own dictation server. I have installed asterisk and have gone through many documentation and

Hi, I have successfully configured an IAX trunk between 2 asterisks, calls can go through both ways without any problems, NAT in the middle of course (iptables) Now , leave them for a while , and make a call from the external server , it doesn't go through, Dial from the internal one, everything works fine again.. Now , it is clearly a problem in the NAT engine,

Yes I used. The problem can be the version of Asterisk? I use Asterisk 13 instead of 11. 2016-02-12 14:31 GMT-02:00, Shabbir abbasi <shabbirabbasi92 at gmail.com>: > have changed this > [dongle0] > audio=/dev/ttyUSB1 > data=/dev/ttyUSB2 > > To > > [dongle0] > imei=123456789012345 > > and imei exact same as on your device ? > > On Fri, Feb 12, 2016

Hello, I've icecast2 installed on Ubuntu 16.04 LTS and I can access it via http://localhost:8000 I followed this document to add authentication: https://icecast.org/docs/icecast-2.4.1/auth.html I added the following to /etc/icecast2/icecast.xml file: <mount> <mount-name>/example.ogg</mount-name> <authentication type="htpasswd"> <option

Hi, we r using HTB algorithm,for traffic shaping, we are facing a problem. we are able to create multiple classes,filters. But when we delete 1 filter all filter gets deleted. how do we avoid that. waiting for you reply Regards Jayesh ------------------------------------------------- Shop & Save at Sifymall.com! Special Festive Offers - up to 60% off on DVD players, MP3 Players. Mobile

> [6] ctivating swap partitions: swapon: /dev/hda7: No such device or address > [6] [FAILED] > [6] ioctl 80041272 not supported by xl_block > [6] Finding module dependencies: depmod: Can''t open /lib/modules/2.4.24-xeno/modules.dep for writing > [6] [FAILED] > [6] Checking filesystems > [6] Couldn''t find matching filesystem: LABEL=/policy Edit your

Hi John, I have looked into the EmitAutoVarAlloca() in CGDecl.cpp. However, I could not figure out how to employ my custom attribute for code generation. For example, my custom attribute is visible in CGDecl.cpp but how can I generate based on my custom attribute if (D.hasAttr<myCustomAttri>()) { //What to do here? } What I wan in IR is something like below. Without Custom Attribute:

hi all, i have reinstalled linux i kept free 17 gb space. i have created 4gb partition by fdisk with LVM options. fdisk -l Disk /dev/sda: 40.0 GB, 40060403712 bytes 255 heads, 63 sectors/track, 4870 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 1275 10241406 7

hi all, i have reinstalled linux i kept free 17 gb space. i have created 4gb partition by fdisk with LVM options. fdisk -l Disk /dev/sda: 40.0 GB, 40060403712 bytes 255 heads, 63 sectors/track, 4870 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 1275 10241406 7

Hi guys, I am trying to perform edge profiling using on hello.bc file by using following command opt -insert-edge-profiling hello.bc -o hello-edge.bc but I get the error that option "-insert-edge-profiling" is unknown. Can you please help me to solve the issue. Please note that I am following the paper available at this link http://llvm.org/pubs/2010-12-Preuss-PathProfiling.pdf

Yes, I used IMEI. But in CLI appearing nothing and it not register. 2016-02-12 14:27 GMT-02:00, Shabbir abbasi <shabbirabbasi92 at gmail.com>: > have you tried imei discovery > imei=123456789012345 > > > write imei number instaed of 12345... > > On Fri, Feb 12, 2016 at 8:51 PM, Vitor Mazuco <vitor.mazuco at gmail.com> > wrote: > >> Hi! >>

Hi Samba community, Here is a problem I could not solve. I would like to mount a cifs share to my local Linux machine, which is bound to a windows domain using winbind. The share needs to be mounted by the linux machine's computer account. Here is what I do: # su - DOMAIN\\computer$ [DOMAIN\computercomputer ~]$ <<< i think there is a problem with the bash prompt, skip it for now

Hi Asit, thanks for the reply. But I guess I was not clear in my question. Actually, i dont want to use __ATTRIBUTE__((ANNOTATE("MOVIATTR"))), since in documentation it is stated that "This intrinsic allows annotation of local variables with arbitrary strings. This can be useful for special purpose optimizations that want to look for these annotations. These have no other