similar to: SuSE 10 no network in dom0 - arp problem?

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on

Hello, Despite of reading a lot of descriptions I don''t understand the network configuration. I simply have too little experience. I work remote with the machine via ssh. My dom0 is running. I copied an existing installation into a LV and created the following file: # cat /etc/xen/domu-sarge # -*- mode: python; -*- kernel = "/boot/vmlinuz-2.6.18-4-xen-686" #kernel =

Hi, I''m using Xen 3.0.3 on two servers with Debian Etch (amd64). These servers have 10 nics (2 onboard and 8 in two 4-port cards) so that every vm can have its own interface. This worked so far with the Xen Version from Etch with a wrapper script wich started 10 bridges at boot time. But now I''ve updated Xen on one of these server to Xen 3.2.0 from backports.org and now the

Hallo Mailinglist:), i used xen 4.1 with xend xm a while. I compiled the unstable 4.2 today and most thinks run fine :). I have only one big problem, the network for my guestsystems. It don't want to work. Hopefully somebody can help me. In Xen 4.1 i only wrote the following line in my questconfig: vif = [ "bridge=eth0,script=vif-bridge" ] And everything works fine. This does not

Hello all, I had setup shorewall before succesfully with a normal LAN to internet connection. Now I''m connected to the internet via VPN and I got problems with configuring Shorewall. Any help is appreciated. This is my setup: - Gentoo Linux laptop (kernel gentoo-dev-sources-2.6.8.1) with Shorewall 2.0.4 (setup for Standalone one interface) and iptables 1.2.11 - VPN client is

Hi, i allready searched the archives, but found no message that really helps me. i am running debian etch on dom0 and debian sarge on domU. I had a running setup with debain sarge on dom0 before, but now with etch i can not get networking to work in domU. I use routed networking, but the same seems to happen with bridged networking: eth0 within domU is not brought up. I think it maybe related

Hi, I cannot get my network up in WinXP- and winVISTA-domU''s I need some help, since I got lost in the google-jungle... My system: UBUNTU gutsy gibon-AMD64 on a intel core duo-system. this is my /etc/xen/winxp.cfg: ######### # # Configuration file for the Xen instance debian.qwork.test, created # by xen-tools 3.5 on Sun Mar 16 20:03:26 2008. # # # Kernel + memory size # kernel =

In spite of reading howtos and this mailing list now for several weeks, I am still not able to get the network of my winXP guest connected to the host (opensuse 10.2) or the external network. There are some network interfaces missing on my host (peth0, vif0.0). ifconfig: eth0 Protokoll:Ethernet Hardware Adresse 00:18:8B:B3:1A:AC inet Adresse:192.168.0.66 Bcast:192.168.0.255

xm list reveals the following information... Name Id Mem(MB) CPU State Time(s) Console Domain-0 0 315 0 r---- 2058.1 Domain-1 11 342 0 -b--- 5.2 9611 Domain-2 12 342 0 -b--- 3.9 9612 Xen seems to be working beautifully but I have not yet figured out how to get Domain-0 to ping both Domain-1 and Domain-2,

hi, i need eth1 for an adsl connection via rp-pppoe (pppd). I was able to hide eth1 in Dom0, but how i use this device in DomU? Do i have to load the 8139too modul, to have eth1 in DomU? cu denny -- Sicherheit verständlich http://www.sides.de GnuPG Key http://pgp.upb.de:11371/pks/lookup?op=get&search=0xAB7D3FE0 _______________________________________________ Xen-users mailing list

I'm sorry to bother you but I'm stuck I can not make a bridge work for me. My current configuration is: eth0 Link encap:Ethernet Hardware Adresse 00:1d:7d:d1:06:bd inet Adresse:192.168.1.1 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21d:7dff:fed1:6bd/64 G?ltigkeitsbereich:V according to all what I could find in the net. The following should

Hello @all, thanks for all the helpfull answers in this mailing list. They helped me compiling a new kernel 2.6.10.11 with Xen 2.0.6 (my first one), setting up a dom0 with RAID, LVM and loop devices for domU, integrating a second network as xen-br1 (I''m calling the /etc/xen/scripts/network script from within /etc/init.d/xend to bring up / down the second bridge.) and bootstrapping

Before starting xend (xen 3.0) these are my correct network interfaces: eth0 Link encap:Ethernet HWaddr 00:14:5E:0A:53:04 inet addr:192.168.1.51 Bcast:192.168.1.255 Mask:255.255.255.0 eth1 Link encap:Ethernet HWaddr 00:14:5E:0A:53:05 inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0 lo Link encap:Local Loopback inet

Hello. I have an cheap seriell to usb adapter with the Prolific chipset hooked on my mac, but I don't know which tty to configure. OS X regognizes the device in its system profiler. /dev/ttys0 seems wrong. Can someone please enlighten me? Thank you for your help! Greetings, Robert Welz

Hi all, After having read most of the available documentation I still have got problems interconnecting two networks in router mode: My configuration consists of two private home networks that I want to connect: Vienna 192.168.0.0/24 - Internet gateway 192.168.0.1 Berlin 192.168.1.0/24 - Internet gateway 192.168.1.1 VPN Devices are configured as 192.168.3.1 (Vienna) and 192.168.3.2

i have quite some problems getting 2 lans together with tinc, setup is : 2 linuxrouter connected to the inet. behind everyone is a subnet 192.168.0.0/255.255.0.0 with some normal windowsworkstations. these 2 subnets should be merged to one. we already connected the 2 linuxboxes with tinc and it worked smooth. but the subnets behind the routers werent pingable. so I thought we need ethernet

I cannot boot domU: # xm create inhouse Using config file "inhouse". Started domain inhouse # xm list Name ID Mem(MiB) CPU VCPUs State Time(s) Domain-0 0 123 0 1 r----- 27.4 inhouse 8 2048 0 1 ------ 11.4 # xm console inhouse Linux version 2.6.12.6-xenU ( root@xen1) (gcc version 4.0.2 20050901 (prerelease)

Hi, I've got a browsing problem, I'm searching the error for a long time now so I think betimes it's a bug ;-) For debugging purposes, I've left away everything in the network that's not necessary. There's now only one XP-Prof workstation (domain member) and one samba server (3.0.22, acting as PDC) anymore. Bind9 is the local DNS server; Forward and PTR entries are

Can someone tell me where to find what error messages mean or enlighten me as to what smb_dont_catch_keepalive: server->data_ready == NULL means ? Many thanks Ian

Hello, I'm new here, and I'm from Germany, so please be patient with me because my English is not so good ;) I am searching for a Step-to-Step Guide to first-configure Dovecot. I want to create virtual Users wich can logon to my Server to a Webinterface to call theire mails. I think IMAP is the right protokoll but it should be safe, so i think IMAPs is better. Unfortunately I am not