similar to: Won''t boot to Xen, GRUB Problem

Hi there, I''ve just built xen & dom0 kernel from gentoo ebuilds (bugs.gentoo.org), but my dom0 kernel crashes during boot. Any help is appreciated. Console log, grub.conf and .config are included, machine is celeron/466, 128MB of RAM. Console log: Linux version 2.6.9-xen0 (root@zirafa) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #2 Sun Nov 14

I have the following message while trying to boot xenlinux: ----------------------------------------------------- >Kernel Panic : Syncing no init found try passing init= option to kernel ------------------------------------------------------ My grub.conf is ------------------------------------------------------- title Xen 2.0 / XenLinux 2.6- 1th test root (hd0,1) kernel

Our newly build xen kernel does not boot. The error message is : Invalid or unsupported executable format. I have build xen from the xen-2.0.4 source (make world, make install) on a debian sarge system. I have not changed any of the kernel configurations, I did make an initrd image. The entry in my menu.lst is : title Debian GNU/Linux, kernel 2.6.10-xen0 root (hd0,0) #

Hi How do I make an initrd for xen. I''m trying to boot rhel3 in fc4, and it keeps getting stuck at Freeing unused kernel memory. I''ve created the device files, but it still doesn''t boot up. I''m pretty sure that the solution lies in makeing an initrd file. Currently my xenU kernel is 2.6.11-1.1369_FC4xen0. Can someone please tell me how to do this? Many

I''m a newbie. :) I followed the steps written by Jerone Young: http://sourceforge.net/mailarchive/message.php?msg_id=10562241 but i found an error at the 17th step: 17. mkinitrd /boot/initrd-2.6.10-xen0.img 2.6.10-xen0 it said:"No module ata_piix found for kernel 2.6.10-xen0, aborting." so I commented the line of "module /boot/initrd-2.6.10-xen0.img" in the

Good evening all, I''ve all but finished installing Xen 2.0.5, XenLinux 2.6.10 and Debian GNU/Linux 3.0r4 into /boot on a colo box currently (and temporarily) running CentOS. I''ve chrooted into the debian install (chroot /boot /bin/bash) and was able to set everything up, install requisite packages, install xen, etc. Now I''m at the last step and I''ve run into

Hi. I am trying to install xen 2.0.5 and am having problems getting the xen kernel to boot. It seems to come up, recognize the PCI bus info, the CPU, memory, and such, and then halts when it gets to trying to mount NFS. It then asks for a boot floppy. My guess is that it is not finding the / partition. The actual kernel panic string, I don''t have because the screen blanks so

Hi List, I run XEN 2 since some month (unfortunatly installed by a fiend of mine). Recently I bought some new hardware and tried to get XEN 3 running on a Debian Sarge 3.1. I installed via the Debian installer a RAID 1 with LVM. even though there are some devfs_mk_dir errors systems comes up. Now I installed XEN but system doe not boot as the boot device seems not to be recocnized by the

Hi, I have successfully installed Xen unstable binary on SuSE 9.3. I am trying to do a source install and I got the following error. Will be glad for any help or guidance. In file included from include/asm-xen/asm/processor.h:18, from include/asm/thread_info.h:17, from include/linux/thread_info.h:21, from include/linux/spinlock.h:12, from include/linux/capability.h:45, from

Hi everyone, I''m getting the following boot error, when installing xen-unstable on a dual opteron 246 machine, with a Tyan 2881 Motherboard, 4GB RAM, SATA Drive and ReiserFS filesystem. The machine is a Fedora Core 4. I installed the i386 FC4 on the dual opteron, I didn''t want the 64bit yet. All my binaries are 32bit and I''m compiling it all with 32bit too. After

Hi, I''m about to start a Masters research project which will use Xen. As such I''m trying to get it to work on my laptop (IBM T40). I''ve built Xen 2.0.1 from the source tarball using the default .config file for the 2.6.9 kernel. I''m using Suse 9.1 as the distribution on top. When I boot Xen, It seems to boot the Xen hypervisitor ok, then starts booting

Hello, I''m trying to build XenLinux 2.4.30 on debian. I get the following error for make linux24 make[2]: *** No rule to make target `skbuff.c'',needed by `/usr/src/xen-2.0/linux-2.4.30-xen0/include/linux/modules/skbuff.ver''. Stop. Could somebody help me resolve this error. Or if this is some problem with the system configuration that I''m using, could

I''m getting a VFS kernel panic when trying to booting to FC3 from Xen. Its the one that says I must supply a valid "root=" option. (sorry I don''t have it verbatim.) I''m using the xen-2.0 binary installer, kernel 2.6.9. I am using ext3fs, but I am fairly certain that I have compiled support into the kernel. (I''ve tired compile xen from the 2.0

Hi, i have a problem with xen. the output of uname is:Linux xen 2.6.12-gentoo-r6 #9 SMP Mon Jan 23 18:13:25 CET 2006 i686 AMD Opteron(tm) Processor 844 AuthenticAMD GNU/Linux i user the SAME config of the kernel, for xen0 domain, and when i boot with xen0 kernel it reboots after this output... . . . ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.

Hi to the ML. I''m new to VLAN configuration, and combining it to XEN is a bit difficult. I want to use VLAN because it''s possible to "arping" from a domU to an other, and VLAN looks like; the only solution to prevent that. May be I''m wrong if someone got a solution, I may be interrested. I''ve also tryed ebtables, but nothing to prevent arp

Hello, I am trying to run Xen 3 on FC5, but I cannot have the eth0 interface appear in domU. I have 3 servers running FC3 and Xen 2 with various domUs since a year. Everything is fine on that front. I took one of the server, upgraded it to FC5 and did the following: - yum install xen kernel-xen0 kernel-xenU - grub.conf contains title Fedora Core (2.6.15-1.2054_FC5xen0 root (hd0,0) kernel

Hello list, I tried to install Xen 3.1.0 on Scientific Linux (RHEL4), but this mission failed.. Hope you can help me by finding the reason for my problem. I downloaded the xen sources from http://bits.xensource.com/oss-xen/release/3.1.0/src.tgz/xen-3.1.0-src.tgz and compiled them by running "make" and "./install.sh". This seemed to work. After setting up grub like this,

I am trying to build xen on x86_64 SLES 9 SP2 box this morning and am getting this error: arch/xen/kernel/built-in.o(.text+0x1bd6): In function `__do_suspend'': : undefined reference to `HYPERVISOR_vcpu_pickle'' make[4]: *** [.tmp_vmlinux1] Error 1 make[4]: Leaving directory `/tmp/xen-unstable.hg/linux-2.6.12-xen0'' make[3]: *** [build] Error 2 make[3]: Leaving directory

Hello, I am trying to run xen-3.0 in some of my dell servers. I have tried the binary distribution of xen, but it doesn''t boot in my test system (a dell poweredge 750) because a module driver problem (I get an error message during booting saying it doesn''t load a NFS root filesystem). So I am trying to compile a custom kernel. So I have downloaded linux source 2.6.12. I am

I have a 2 way machine. Soliciting folks opinion on whether it makes sense to smp enable DOM0 so that IO handling can be balanced over both CPU''s... Opinions? Thanks, Scott _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users