similar to: RE: Compiling legacy LSI megaraid drivers (Linux 2.6.11)with xen 2.0.7?

Hi all, I''ve been using Xen for a while and I am trying to install it onto a Dell Poweredge 2950. The 2850 uses a PERC4/Di raid on motherboard, which requires the LSI Legacy SCSI Raid driver to be compiled into the 2.6.11-xen0 kernel. I''ve been recompiling the kernel by: 1. Go into the linux-2.6.11-xen0 directory. Select the driver using "make ARCH=xen

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

Dear list, I have inherited a CentOS-5 box with a LSI Sata Raid controller. It is configured as a RAID5 w/hot-standby. My concern is that I have no present means of determining the RAID status w/o downing the system and going into the bios to get status. If a disk has failed and brought the standby disk online, I would like to know about it, the day it happens by seeing it in syslog or getting

Hey, anyone using an LSI MegaRAID experienced "disappearing drives"...? We installed 6 new C6 servers, each with a Supermicro SMC2108 (LSI MegaRAID) controllers and 3 PX-128M5Pro SSDs ( RAID1 + hostswap). 2 weeks (and almost no activity on it, since not in production, apart from installation) later, megacli sees (based on the slot numbers): - on one server: only the 2nd disk of the RAID

Hi, what to do, if the kernel hangs on boot time with: megaraid: ABORTING-1 cmd=12 <c=0 t=0 l=0> megaraid: ABORTING-1[d7] fw owner Konrad Naumann _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Dear All; I want to install Centos 7 latest build on NEC Server 5800/120b-2. The installation wizard fails to detect the storage connected to LSI SATA MegaRaid PCI. Centos 5/6 were working fine with this H/W configuration but not the case with Centos 7. Please; advise. Fawzy Ibrahim Redhat Certified Engineer

I have LSI Logic MegaRAID 8480 Storage controller I am having trouble reconfigure one of the hardware raid devices It is configured with 4 hardware raid logical volumes on /dev/sda /dev/sdb /dev/sdc /dev/sdd. I am in the middle of rebuilding the system, ?and at this point I am only using one of the volumes, /dev/sda /dev/sda, /dev/sdb, and /dev/sdd are all 2 drive raid1 mirrors I will be

Happy new year ! We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot fine. The server can't boot due to a bug in LSI megaraid module. Boot log ends by a lot of lines: RESET_GEN2: retry=xxx, hostdiag=a4 I tried Centos 6.6

Hi, Are there CLI utility for RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) for CentOS 5.8? Regards, Kaushal

i'm configuring a storage server with CentOS 6.2, it uses a LSI MegaRAID SAS controller, I'm using LSI's megacli to configure the storage... Any ideas on how to get drive failure notifications out of this system? I'm configuring hot spares but I'd still like some sort of notification when a drive has failed so the spare can be replaced. -- john r pierce

I generally 3Ware controllers get recommended but the servers we are looking at getting use LSI Megaraid SATA 150-4 controllers. I was wonder what experiences there are under CentOS 4 with these positive & negative? Regards, Paul Berger

Hi all, Does anyone know of a Linux rescue CD with driver for a SLI MegaRAID 8708? -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

On 8/17/2016 7:46 AM, Fawzy Ibrhim wrote: > There's no option in BIOS to disable the RAID mode; this is NEC servers !! huh. i've never seen anyone using the lsi megaraid firmware with intel SATA ports, so thats two things weird about NEC, kinda glad I don't ever see those. -- john r pierce, recycling bits in santa cruz

Hello, This afternoon I wanted to upgrade to 7.1 two good old dell PowerEdge servers which were running FreeBSD 6.x. It went fine and quickly on the poweredge 1950, but it failed completely on the poweredge 1850. Facts: - boot cd and setup / operation of freebsd 6.x or 7.0 is fine Message log abstract: $ uname -v FreeBSD 7.0-RELEASE-p7 #0: Sun Dec 21 08:31:52 UTC 2008

Everyone, I am trying to install a Centos 6.0 system on a SuperMicro with an LSI MegaRaid SCSI 320-2 controller. I had originally tried to install 6.4, but the 6.4 install DVD does not boot with this configuration. See : http://bugs.centos.org/view.php?id=5377 Fortunately, the 6.0 install DVD worked fine until it failed to identify the hard disc controller. I checked the lsi.com site which

Hi All: Has anyone tried using an LSI MegaRAID 320-2E PCIe RAID Controller in an HP DL380G5 (of any HP G5 DL for that matter) running CentOS 5? It looks like it should work but it would be nice to know that someone has already done it before I start going to all the effort and expense of building the box. I have a spare DL380 and a couple of IBM EXP400 disk arrays that I would like to configure

Hello, Problem: Debian(linux-image-xen-686) Dom0 does not boot from LSI MegaRaid I''m sorry, because I don''t know if I''m at the right place to ask for a solution for my problem, because it might be Debian related. Nethertheless I try: Xen Kernel are in Debian Unstable for a month or so. I''m running an Etch (testing) machine here and I wanted to try out

This patch add a support for second version of the virtio-mmio device, which follows OASIS "Virtual I/O Device (VIRTIO) Version 1.0" specification. Main changes: 1. The control register symbolic names use the new device/driver nomenclature rather than the old guest/host one. 2. The driver detect the device version (version 1 is the pre-OASIS spec, version 2 is compatible with

This patch add a support for second version of the virtio-mmio device, which follows OASIS "Virtual I/O Device (VIRTIO) Version 1.0" specification. Main changes: 1. The control register symbolic names use the new device/driver nomenclature rather than the old guest/host one. 2. The driver detect the device version (version 1 is the pre-OASIS spec, version 2 is compatible with