similar to: Python using 99% cpu, xend unresponsive

I understand that all work is going into xen3, but I had wanted to note that aoe (drivers/block/aoe) is giving me trouble on xen 2.0.6 (so we can keep and eye on xen3). Specifically I can''t see nor export AOE devices. As a quick background on AOE, it is not IP (not routable, etc), but works with broadcasts and packets to MAC addresses (see http://www.coraid.com). (for anyone who

Hello all, I feel dumb asking this, but does anyone have a link to the SIP firmware for the 7912 on Cisco's site? I have a SmartNet contract, but I just can't find the link (you can search for "7960 sip firmware" and find that fast). Thanks for the help, Jeb Campbell jebc@c4solutions.net

I'm replacing a Merlin for a client and they have a PagePal Intercom that I would like to reuse. Here is what I know about it: It has a screw-down wires that goto rj-11 (This was told to me over the phone) that went into one of the Merlin ports. I tried bring it up with fxo_ks and fxo_ls (assuming it was analog and autoanswered) but no luck. I would be happy to replace if anyone knows of

Hi All, I'm using an X100P to connect to PSTN ( context=from-pstn ). I'm trying to get fax detection to work. Using the simplest dialplan, I cannot get * to detect fax tones: [from-pstn] exten => s,1,Answer exten => fax,1,Goto(ext-fax,999,1) The fax is never detected (ie: Goto never executed) All that I see on the * -vvvvc console is: -- Executing Answer("Zap/1-1",

Hi all: I've been developing and testing on a tdm400p card and it's been going well. As you probably know, the tdm400p needs an ide power supply, but the dell poweredge 2600 that this card is destined for eventually has all the power supplied on the backplane with no ide cables. The thing is, on the motherboard in the server, there is an ide ribbon connector, and beside that, something

Hello Everyone, I have released AstLinux 0.2.2. There are way too many improvements to list here, but here is a short summary: Linux 2.4.27, iptables, mini_httpd (with PHP & SSL), phpconfig, AstShape traffic shaping, tftp server, OpenSSH, proftpd, Soekris Net4801 and Pentium-MMX and higher x86 support. There is actually WAY more software, but I couldn't possibly list it all. It

Hi, I'm looking at setting up a small production system - predominantly for voice mail and IVR (with a few extensions and hold music MP3's). I've found a couple of IBM X330 servers, with dual 1.13Ghz P3 processors. My question is; is a dual 1.13Ghz P3 server sufficient to run for real-life demands? I come from a Unix/Mac background, so I'm not swayed by the '3Ghz'

Hello, I have a T100P card on a Red Hat 8 machine with Asterisk installed on it and I'm trying to get the data routing properly through it. I purchased an Integrated Data/Voice T1 Line with channels 1-6 voice and 13-24 data. The line is plugged directly into the Asterisk machine's T100P card. Previous to the asterisk set up we had an Adtran router that connected everything to what the

I know this is on the wiki, I just want to confirm so I don't blow up my cisco phones. I've got several cisco 7940's all running using cisco power cubes. However, my boss wants me to switch just a few over to poe, but doesn't want to fork out the dough for a nice cisco poe switch, or anybody else's poe switch for that matter. So my question is, what is the '99.999%

We currently have a 15-phone system using Asterisk, a combination of analog phones/Grandstream HandyTone-286 and Grandstream BT101s, and 4 X100Ps connected to analog lines. The system works well except for the occasional echo problem. I have all the echo parameters configured, removed all the extra incoming analog lines except to the PBX, etc. following all the advice on the wiki and on the

Samba has a shadow_copy module to serve read-only snapshots to windows clients. I tried to use snapshotting in freebsd 5 (haven''t tried 6), but couldn''t get it stable. I''m really looking forward to getting it going on Solaris. Anyway you can read about the format of the link here: http://us5.samba.org/samba/docs/man/Samba-HOWTO-Collection/VFS.html#id2618182 When it

Hi all, sorry to intrude on xen-devel, but I think I need direction from the expertise here. I''ve admin''d Xen servers of various flavors for a couple years, but never seen this before. After a period ranging from several hours to several days, my primary database and development DomU completely locks up. Net disconnects, but CPU(sec) continues to tick in xentop. No errors, and

I have a very annoying problem, when doing rake db:migrate, I get the error message: Missing these required gems: will_paginate ~> 2.3.11 But the gem is not missing, It runs very well in my app. To make the rake pass I have to comment out the gem in my environment.rb file. environment.rb: config.gem "will_paginate", :version => "~> 2.3.11", :source =>

I saw in another post that a best practices doc will be coming, but I figured I would try to get this working. I''m trying to understand why zfs uses so many "zfs create" so I can use it better. What makes sense is that each zfs fs can have it''s own options (compression, nfs, atime, quota, etc). I really love this because it is so tuneable -- compression on these

Hi I am trying to stablish a relation between two different Samba domains. Each domain has two PDCs, all they are WINS servers, and the two domains are in different subnets. They are configured to use LDAP as the user/group/machine database. First, I will create the relation, being DOM1.CORP the trusted domain, and DOM2.CORP the trusting domain, so in a server of DOM1.CORP, I create a user this

Hi, I've been attempting to write a gui wrapper to launch ssh -X user at machine application I'm trying to launch ssh and connect to it with pipes so that my front end can enter the password if required (either from a cache or by popping up a dialogue box). I've been having problems with pipes though reading from ssh's stdout, for when it asks for the password. Before I go

Hi,all, I cannot get my network in domain1 work. Here is my configuration: in dom0: I have two network cards, the ip addrs are 141.213.10.110 and 192.168.0.4, respectively. 141.213.10.110 is an external IP and can access internet directly. The gateway should be 141.213.10.1. /etc/xen/vfp: the domain1 configuration file, I created domain1 using ''xm create vmid=1 -f

Here are some more messages that pop in the server logs when I try to read folders on a Win2K file server - the folders/files were saved from a Macintosh on the network: smb_proc_readdir_long: name=\Font Library\B\Bernhard BoldCond. et al?\*, result=-2, rcls=1, err=123 smb_proc_readdir_long: name=\Font Library\K\Kino, et al?\*, result=-2, rcls=1, err=123 smb_proc_readdir_long: name=\Font

Hi, I''m a newbie in VM/Xen. As a first step to do some study/experiment on VM, I want to install Ubutnu (10.04) as DomU on top of Ubutu (10.04) Dom0. I need some direction to stat with: - how to install the DomU image - how to configure the network address I''d be greatly thankful to you for providing some useful link to this end. Thank you in advance. Regards, -shopno

Good morning, I am new to Xen, and trying to understand how Xen works. I have some questions about virtualization of interrupts on Xen. Thanks in advance for all helps. 1) From papers about Xen architecture found at Xen homepage, Xen seemingly intercepts interrupts of Dom1 (paravirtualization). So interrupts occur in Dom1''s context are sent to Xen, and Xen handles them. Is that correct?