similar to: system suggestion

Sorry to reply to myself, but I wanted to expand this to -stable and add some more info... See the original post at the bottom of this msg. I just took the Smart 2/P and put it in slot1 (one of the shared Eisa/PCI slots.) Now the Dmesg output shows the "SMP: AP CPU" lines in a different order... They were: SMP: AP CPU# 3 Launched! SMP: AP CPU# 1 Launched! SMP: AP CPU# 2 Launched! now

I've included all posts till now. Can I ask anyone with older proliant multi-cpu hardware using the smart2 controllers to get in touch with me? I am curious to know if this works for anyone... -D Quoting Danny Carroll <fbsd@dannysplace.net>: > Still more info... > It does not work on 5_0-RELEASE either. > > -D > ----- Original Message ----- > From: "Danny

Hello everybody! Currently, dovecot just kills itself if it detects that time has moved backwards more than a hardcoded number of seconds. I accept the reasons, but I do not like to restart dovecot manually after waiting for time to move forward again. A cron job would not help, because time might still be wrong when it restarts dovecot. All our systems run ntpd, but they might be offline

A customer is looking to replace or augment their Sun Thumper with a ZFS appliance like 7320. However, the Thumper was used not only as a protocol storage server (home dirs, files, backups over NFS/CIFS/Rsync), but also as a general-purpose server with unpredictably-big-data programs running directly on it (such as corporate databases, Alfresco for intellectual document storage, etc.) in order to

Hi all, Any one tried installing Asterisk on Linksys WRT54G? We have but facing problems with SIP to SIP calls. The phones ring and calls are established but we cannot hear any voice at all. I tried allow=all in the general section but did not work. So I forced ulaw. Can any one please check it out and let me know what is wrong? Here are the conf files: Asterisk Version: Asterisk

I setup a CentOS 6 server to use with KVM/QEMU, and I am getting the following error a good bit, granted it doesn't seem to be causing any trouble. I figured I would post and see if anyone has any ideas on the issue, or if I can just dismiss it. If I look at my logging/dmesg, I see: do_IRQ: 19.217 No irq handler for vector (irq -1) do_IRQ: 3.178 No irq handler for vector (irq -1) do_IRQ:

How many people out there are doing Rails development on a Mac Mini? I''ve been eyeing up the MacBook as well as the new MacMini trying to decide if I want to splurge. I''ve been doing very little Rails development thus far which makes the investment a little hard to justify. The Free Mini Mac ( http://minimacs.freepay.com/?r=16778073) offer seems like the best route but

Hello, I'm a newbie so here's my question. I'm trying to install CentOS 6.5 on a HP Proliant 350e server. This server has 4x 1TB hard drives. I'd like to enable the hardware RAID 5 and stripe all 4 disk into one 3TB logical volume. Then install CentOS on the 3TB volume. However after I install I can't get the server to boot. I know about the MDOS vs GPT labeling issue.

Just thought I'd pass along an error I received this weekend after upgrading two servers to 5.6. Both are HP Proliant DL380 servers running 64-bit, but one is a G6 model and one is a G7. After the upgrade and the reboot to the 2.6.18-238.9.1.el5 kernel, both servers displayed the following error at boot: "pci_mmcfg_init marking 256MB space uncacheable." Some Googling

Hi there, I've been a happy djbdns+tinydns user for many, many years. I want to keep using it, so answers of the form "bletch! Use ISC BIND the way BSD intended" will be ignored :-) Having said that, one annoying consequence of my transition some time ago to using ntpd, rather than just setting the clock once-off with ntpdate as I used to, is that the /etc/rc.d mechanism starts

> I have been running performance tests on our Debian-Samba 3 file > server. It is running the 2.4 kernel on a ProLiant DL380 G3 server > (Full Specs below). For a windows client, we are running Windows 2003 > server on the exact same hardware. They are both running at Gigabit > speed. > > What we have found is that on files 16MB and smaller we can get better >

I run a RH 7.3 installation on a Compaq Proliant 6500 with dual pentium 266Mhz processors, approx. 630MB ram and a hardware SMART-2DH RAID controller and array. All file systems are ext3. The server has been in service for a couple of years now. From time to time we will lose power in our office or have another situtation that causes the server to lose power without a proper shutdown. We had

Hi. This is my first samba install. I have an XP box which connects to internet via dialup "DUN", is the base of the lan and provides InternetConnectionSharing to the lan. The XP lan base is 192.168.0.0 and the XP user "Owner" is on 192.168.0.1 and hostname is "WILLY". My Fedora 19 laptop on 192.168.0.148 with hostname "splurge.f19". I am having

Package: xen-utils-3.0.2-1 Version: 3.0.2-3+hg9762-1 Hi, while trying to get xen work, I encountered two problems: 1. I don't know if its really an error, but I think something is messed up with the subdir-name /usr/lib/xen-3.0.2-1 because the version-number of the package suggests that it is an other version, than the subdir says. Every time when I call xm for example I get: WARING!

Hi, I''ve been trying to boot stefano''s minimal dom0 kernel from git://xenbits.xen.org/people/sstabellini/linux-pvhvm.git 2.6.36-rc1-initial-domain-v2+pat On xen-unstable, I get the following WARN_ON()''s from Xen when bringing up the NIC''s, then the machine hangs forever when trying to login either over serial or NIC. (XEN) Xen WARN at msi.c:649 (XEN) ----[

I have just purchased an HP ProLiant HP ML110 G5 server and install ed CentOS 5.2 x86_64 on it. It has the following spec: Intel(R) Xeon(R) CPU 3065 @ 2.33GHz 4GB ECC memory 4 x 250GB SATA hard disks running at 1.5GB/s Onboard RAID controller is enabled but at the moment I have used mdadm to configure the array. RAID bus controller: Intel Corporation 82801 SATA RAID Controller For a simple

I'm looking at ordering a server from HP. I checked around on Google and found in the Wiki that the ProLiant DL380 is supposed to be known to work with *. I'm going to get a price quote on the following setup: HP ProLiant DL380 G4 Server w/ the following options: Intel Xeon 3.20GHz/1MB 2GB REG PC2-3200 (2 X 1GB) HP ProLiant Battery Backed Write Cache Enabler for SA6i RAID 1 drive set HP

Hi all, I just built a new Compuke proliant 5000 using the 4.8 CD and I would like to cvsup and build a 4.8 STABLE system but I have been loosely following the list for a couple weeks and noticing a LOT of problems lately... Is everything settling down now? Rick P.S. If anyone has any tricks for these Compuke proliant 5000 machines please contact me : )

Hello, i've a problem, this is my configuration: - Atlantis Land UPS with serial port - a generic RS232 to USB cable adapter (QinHeng Electronics HL-340 USB-Serial adapter for linux). The problem is in the syslog file where i find: [...] Aug 19 09:07:25 ProLiant megatec[1126]: Communications with UPS lost: No status from UPS. Aug 19 09:07:26 ProLiant megatec[1126]: Communications with UPS

Hallo, I am running dovecot on a PC (a workstation) to have a mail client independent storage for my mails. Now I would like to have the system clock set correctly by using ntpd or ntpdate (using debian/sid). The problem is, that the PC is not online at boot time, but is set online on demand manually using "pon" to start the pppd later. So ntpd cannot sync the time on boot time