similar to: custom network script for SuSE boxes

After many unsuccessful attempts at getting Xen 3.0 to run with any level of stability, I''ve decided to return to Xen 2. I''m currently trying to build the kernel under SuSE 9.3 and getting the following error messages: LD init/built-in.o LD .tmp_vmlinux1 arch/xen/kernel/built-in.o(.text+0x85b): In function `ctrl_if_suspend'': : undefined reference to

Hi all I have a SuSE 9.3 domU. It has a eth0 interface, corresponding to some vif interface in the dom0. Running ifup eth0 doesn''t seem to work. This means I don''t get any network. It seems that /sbin/ifup relies upon /sbin/getcfg but getcfg does not seem to find the right configuration for the eth0 device. A attached a patch below with a work around for this.

Hi all This is a strange one. On upgraging to SuSE kernel-2.6.11.4-21.7, I have suddenly found that I loose the video on boot up! The video disappears very early in boot, possibly while Xen hypervisor is starting, printing out the physical memory map. If you are patient and wait for the machine to reach run level 5, the X server starts up and you get a picture back. You can then switch back and

Hello, I'm not sure if it's a bug - or I'm just too stupid..!? Downloaded the Samba beta-code from ftp.suse.com/gd - rpm's for SuSE 8.2 (03/06/22). Installed all packages with no problems - samba works well, but integration in a W2K Domain fails. Kinit is successful but joining a domain brings up the following errors. nas-01:~ # net ads join [2003/06/23 21:44:41, 1]

Has anyone had issues starting xen0 on a md? I have installed it a few times now w/ and w/o raid. Anytime I have a raid1 mirror, Xen panics on boot when trying to mount /. It gets past waiting for /dev/md0 to appear. John _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Has anyone had issues starting xen0 on a md? I have installed it a few times now w/ and w/o raid. Anytime I have a raid1 mirror, Xen panics on boot when trying to mount /. It gets past waiting for /dev/md0 to appear. John _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

On Wed, Jun 22, 2016 at 11:45:32AM +0200, Cédric Bosdonnat wrote: > NetworkManager isn't provided on SLES. As yast2 lan is available on all > openSUSE / SLE distro, use it instead. > --- > p2v/gui.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/p2v/gui.c b/p2v/gui.c > index e720002..b50cadf 100644 > --- a/p2v/gui.c > +++

NetworkManager isn't provided on SLES. As yast2 lan is available on all openSUSE / SLE distro, use it instead. --- p2v/gui.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/p2v/gui.c b/p2v/gui.c index e720002..b50cadf 100644 --- a/p2v/gui.c +++ b/p2v/gui.c @@ -51,6 +51,7 @@ #include <config.h> +#include <sys/stat.h> #include <stdio.h>

NetworkManager isn't provided on SLES. As yast2 lan is available on all openSUSE / SLE distro, use it instead. --- p2v/gui.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/p2v/gui.c b/p2v/gui.c index e720002..f8605a3 100644 --- a/p2v/gui.c +++ b/p2v/gui.c @@ -654,7 +654,10 @@ test_connection_ok (gpointer user_data) static void configure_network_button_clicked

On a working printer & system I needed to change the printer definition on one of two systems each with a printer [samsung laser and hplj4]. Yast2-printer stalled at 50% [loading configuration] and had to be closed. When I tried again the cups daemon died when trying to save the printer definition. I found that /etc/cups/ was empty! Re-installing the printer function in Yast2 did not do any

Hi, I have SLES 10 running (after much searching, reloading, and trial and error) a Samba PDC with LDAP. I have tried to use the many Samba as PDC documents out there, but none seemed to work. I even tried one from the Suse Site geared for SLES 10, no luck. I ended up using Yast2 to configure the server and get it running. It is accepting workstations, and user connections with one problem.

I''m having problems booting Dom0 on an unbranded server. Server is running SuSE 9.3 x86_64 and has been working fine for a couple of years as a standard boot pc. I installed the 2.0.5c version of Xen which is part of the SuSE repository. I cannot boot into Xen though, booting Dom0 stops after: NET: Registered protocol family 16 I know from a normal boot that the next part is PCI

Hi all, Finally i got hold of some bt-dongles that seems p[retty stable, the asus-bt211. After installing them, i rebuild 11.3-rc1 added mobile.conf (bt-addres and blackberry address) and "mobile show devices" is showing me that the BT-link is up, and remains stable up. Seems good, but it looks like asterisk is seeing the BB as a trunk/FXO. However, i want to use the phone as an FXS.

> Hi, I have two questions about llvm, and expect your reply very much. > > 1. Is there any plan of llvm to support Thread-Level Parallelism by using > OpenMP, MPI, pthread or llvm-defined directives? > If automatic parallelism exploring is very hard, what is the key > problem? We can't get the precise data dependence > information at compile-time? llvm-gcc uses

On Tue, May 24, 2016 at 05:36:22PM +0800, Jason Wang wrote: > This patch tries to implement an device IOTLB for vhost. This could be > used with for co-operation with userspace IOMMU implementation (qemu) > for a secure DMA environment (DMAR) in guest. > > The idea is simple. When vhost meets an IOTLB miss, it will request > the assistance of userspace to do the translation,

On 29/02/2020 16:30, Alexander Kushnirenko wrote: > > You are right, this is used on Unix domain member I know I am right, I put that in the wiki ;-) > > Well on DC I see files owned by unix user with UID=3000000 in > /var/lib/samba/sysvol/, and when I look on the same SYSVOL share from > windows world I see that the file is owned by BUILTIN\Administrator > user

Hi , I have setup xen on a number of different machines already; however, I couldn''t get xSeries 330 working with Xen. When it boots up, it says "Waiting for device /dev/sda1 .... device not found" and then return a shell prompt. I have looked up this error on the mailing list. I found that the error is potentially caused SCSI driver and it can be resolved this problem by

Hi, PROBLEM : I'm not able to use the printer connected to a windows 2000 machine. INSTALLATION: I have 3 PCs. - One is a windows 2000 PC with the printer connected to it - One is a redhat machine - One is a Suse 9.0 machine. The redhat machine is able to print to the samba printer, not the Suse one. smbclient -L //secretariat shows identical data on both Linux machines

Hi, I have down loaded the Samba 3.0.7 binary rpm's for SuSE 9.1 from the samba ftp. I'm trying to install it using Yast2 and don't let me. If I use the rpm commands I get an error too. Do I need a signature or something alike? If yes, where do I get it and how can I make this beauty to work.

Hi all I'm trying to install R 2.3.0 under Suse 10.0. As I'm using SSH to login into the SUSE server, I can't use YAST2, so I have to use rpm -i in the shell. The system tells me that I need some other packages such as xorg-x11-fonts-100dpi, blas, libgfortran.so.0(). Is there some website where I can download and install these packages? Thanks a lot! Zhihua Li