similar to: Cross-Domain Networking Problems

Hello, Despite of reading a lot of descriptions I don''t understand the network configuration. I simply have too little experience. I work remote with the machine via ssh. My dom0 is running. I copied an existing installation into a LV and created the following file: # cat /etc/xen/domu-sarge # -*- mode: python; -*- kernel = "/boot/vmlinuz-2.6.18-4-xen-686" #kernel =

Hello all, I had setup shorewall before succesfully with a normal LAN to internet connection. Now I''m connected to the internet via VPN and I got problems with configuring Shorewall. Any help is appreciated. This is my setup: - Gentoo Linux laptop (kernel gentoo-dev-sources-2.6.8.1) with Shorewall 2.0.4 (setup for Standalone one interface) and iptables 1.2.11 - VPN client is

Hi, i allready searched the archives, but found no message that really helps me. i am running debian etch on dom0 and debian sarge on domU. I had a running setup with debain sarge on dom0 before, but now with etch i can not get networking to work in domU. I use routed networking, but the same seems to happen with bridged networking: eth0 within domU is not brought up. I think it maybe related

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on

I'm sorry to bother you but I'm stuck I can not make a bridge work for me. My current configuration is: eth0 Link encap:Ethernet Hardware Adresse 00:1d:7d:d1:06:bd inet Adresse:192.168.1.1 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21d:7dff:fed1:6bd/64 G?ltigkeitsbereich:V according to all what I could find in the net. The following should

Hi, I''m using Xen 3.0.3 on two servers with Debian Etch (amd64). These servers have 10 nics (2 onboard and 8 in two 4-port cards) so that every vm can have its own interface. This worked so far with the Xen Version from Etch with a wrapper script wich started 10 bridges at boot time. But now I''ve updated Xen on one of these server to Xen 3.2.0 from backports.org and now the

Hello. I have installed the SuSE Linux 10 XEN kernel but no domU yet. Now I cannot ping to and from dom0. I get lots of ARP broadcasts from dom0 but dom0 seems to ignore ARP answers. When pinging to dom0 it ignores arp requests. This happens regardless xend is running or not. This happens in the xen kernel only, when booting stock kernel all works as expected. What can I do? Robert

Hi I''m testing around with xen 3.0 snapshot from last week. And i''m now having a problem with a xenbr which is based on a vlan if (dot1q). this is all in dom0 os: debian testing network: tg3 I can start the bridge based on my normal physical eth0 which is working without any problems. My clan without bridge is also working. I can start the bridge based on a vlan if with help

Hallo Mailinglist:), i used xen 4.1 with xend xm a while. I compiled the unstable 4.2 today and most thinks run fine :). I have only one big problem, the network for my guestsystems. It don't want to work. Hopefully somebody can help me. In Xen 4.1 i only wrote the following line in my questconfig: vif = [ "bridge=eth0,script=vif-bridge" ] And everything works fine. This does not

hi, i need eth1 for an adsl connection via rp-pppoe (pppd). I was able to hide eth1 in Dom0, but how i use this device in DomU? Do i have to load the 8139too modul, to have eth1 in DomU? cu denny -- Sicherheit verständlich http://www.sides.de GnuPG Key http://pgp.upb.de:11371/pks/lookup?op=get&search=0xAB7D3FE0 _______________________________________________ Xen-users mailing list

Dear, I''ve attempted to upgrade a Xen box from 3.1.2 to 3.2.1. Unfortunately it has been a partial success only. At this point I''m really stuck with a network problem that affects my HVM machines (Linux PV run fine). The really odd thing is that everything seems to work properly, except that the "vif" network interfaces in dom0 seem to have only dropped TX packets for

Hello @all, thanks for all the helpfull answers in this mailing list. They helped me compiling a new kernel 2.6.10.11 with Xen 2.0.6 (my first one), setting up a dom0 with RAID, LVM and loop devices for domU, integrating a second network as xen-br1 (I''m calling the /etc/xen/scripts/network script from within /etc/init.d/xend to bring up / down the second bridge.) and bootstrapping

Hi, I cannot get my network up in WinXP- and winVISTA-domU''s I need some help, since I got lost in the google-jungle... My system: UBUNTU gutsy gibon-AMD64 on a intel core duo-system. this is my /etc/xen/winxp.cfg: ######### # # Configuration file for the Xen instance debian.qwork.test, created # by xen-tools 3.5 on Sun Mar 16 20:03:26 2008. # # # Kernel + memory size # kernel =

Today I found I can not ping some of my domU''s. I logged in to dom0, did a "xm list", all domU are there. Then I did a "ifconfig" and surprised to find some of vif''s disappeared! Like for example. "xm list" show dom13 is alive, but "brctl show" shows no vif13.0. If I "xm console 13", there''s some message: WARNING:

Hello, There is a xen setup in which "brctl show" gives the following output. bridge name bridge id STP enabled interfaces eth1 8000.003048c9d4df no peth1 vif1.0 vif2.0

Hi, I have recently updated one of my systems from CentOs 6.4 to CentOS 6.5. This systems is used as a RIPv2 routing server with quagga which is the termination point of some GRE tunnels. While running CentOS 6.4 I see the multicast packages arriving at the eth0 and the GRE tunnel interface. While running under CentOs 6.5 I can see the multicast packages arriving at the eth0 but not on the GRE

Hi, I have a new xen hosting platform. I have given the bridge a static IP which I can ping/ssh to etc, when I create a new vm all works well apart from the networking. If I give DomU a static IP I can''t ping out from the box, Dom0 can''t ping the vm. I''m suspecting it just isn''t seeing the bridge but am unsure where to start looking. This is a very standard

Hi, I''ve set up identical (what I think) machines using SLES 10 x86_64, but a new one of those is saying frequently in /var/log/messages: kernel: bond0: received packet with own address as source address A short summary of ifconfig looks like this: bond0 Link encap:Ethernet HWaddr 00:14:4F:2A:12:9C inet addr:132.199.176.78 Bcast:132.199.255.255 Mask:255.255.0.0 eth0

Hi All, I am facing an issue regarding communicating a value from outside to a Guest OS (linux, solaris and windows) launched on Xen Server. I did went through this thread, but It was not completely clear. http://lists.xensource.com/archives/html/xen-users/2006-07/msg00473.html My question is - Is there a way in Xen, through which I can communicate a value from outside to a Guest OS (linux,

Hello list, I cannot get make-kpkg to build a Xenlinux type kernel into a Debian kernel binary on my Debian Squeeze x86_64 system. I am using GNU/Linux kernel sources tree (2.6.34.4) with Xen patches for this custom kernel. I am trying to use the make-kpkg command to build a working linux-image-2.6.34.4-xen-amd64 package for my system. The sources are vanilla (available from kernel.org) with