similar to: Gateway with 9 VMs

Hello, I am working on Network-Simulation (VNUML). Our simulator uses linux bridgi= ng to connect the UMLs. So there is one problem: The example is the following: There are two hosts simulating one big net. The two hosts have connection over the external nets Net3 and Net6 (see htt= p://www.uni-koblenz.de/~timbub/verteilteSim3.GIF), but in fact there is onl= y one physical connection between the

Hello list, I'm setting up a virtual network consisting of several UMLs (User Mode Linux) connected with the virtual bridge. Communications works quite well between the host and the virtual machines. Setup: 2 UMLs connected via tap-devices to the bridge (tap1,tap2). The host uses the bridge-device br0 to talk to the clients. Now I want to tcpdump the traffic between host and UML1 on virtual

Apologies if this has been brought up before, but extensive googling and digging through my list archive didn't turn anything up. Basically, I'm working on an AGI web app and need to read some digit input. I'm having multiple issues with asterisk interpreting agi commands at the moment, but I figured I'd start with this one. when I call GET DATA or STREAM FILE I don't

Hi, I'm setting up our new mail system using dovecot as mailbox server. As our goal is to have many many small redundant (virtual) servers as components, for example a mailhub (just relaying mail) and a frontend smtp server (just accepting or denying mail in the first place and then forwarding it to the mailhub), etc. I want to run Dovecot on a different server than the main MTAs. The mailbox

Hai marco, Well, this is a hard one to answer for me. I'll give it a try. ;-) > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Marco Gaiarin via samba > Verzonden: vrijdag 2 augustus 2019 15:28 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] winbind seems to hang when the DC goes > down instead of switching

Hi, I am trying to set up a bridge that connects 2 user mode linux (UML) machines. The bridge lets ARP traffic through, but not the IP traffic. linux:~ # brctl showmacs br0 port no mac addr is local? ageing timer 2 00:ff:7d:86:06:47 yes 0.00 3 00:ff:bc:de:07:76 yes 0.00 2 fe:fd:c0:a8:00:03 no

Hi List, I have a problem authenticanting some of the users into a Windows 2000 PDC with Samba 2.2.5. The thing is that I can add some of the users in the PDC as Samba users but with some of them I can't, I run the following command and I get this: # smbadduser lrodrigu:lrodrigu ERROR: lrodrigu Not in passwd database SKIPPING... # But the user 'lrodrigu' is in the passwd database

Hi The user lrodrigh exist in the /etc/passwd ? If the user exist in the domain, the user must be exist in unix password DB. I think that is the source of your problem. ----------------------------------- St?phane PURNELLE stephane.purnelle@corman.be Service Informatique Corman S.A. Tel : 00 32 087/342467 Hi List, I have a problem authenticanting some

On Thu, 25 Apr 2019 10:34:24 -0700 Mason Schmitt <mason at ftlcomputing.com> wrote: > > > > > > Forgot to mention, are sure your time sync over AD is working > > correctly. One to add to you list, check times of server and > > clients, (* yes again, if needed just to be sure). > > > > Yes, I have double check that time is correctly being synced.

Hi, a few days ago, we switched our site from pop3 to imap. We are running about 20 users with Netscape 7.0 on a FreeBSD-4.8 Server . I installed dovecot 0.9.99.1 via the freebsd-ports collection, which was as easy as make install and start dovecot. Our users mailboxes are still standart mbox format in /var/mail/(user), as it is default in Freebsd. Now we suffer from a realy ugly problem,

> > > Forgot to mention, are sure your time sync over AD is working correctly. > One to add to you list, check times of server and clients, (* yes again, > if needed just to be sure). > Yes, I have double check that time is correctly being synced. FYI, Rowland, the process outlined in the wiki for using chronyd does not work on Ubuntu 18.04 (my AD DC is on Ubuntu, but my file

Is there an extra step which must be taken to get postfix to deliver email via a relay host when the postfix machine is pointing to an samba internal DNS? I did a test setup using a public DNS server and it worked. Same setup where the machine (Debian 9) is pointing to a samba DNS doesn't work. The errors in the postfix log seem to be DNS related. Thanks,

Hello Remko: sorry to bother you again,after e mailing freebsd-security@FreeBSD.org mailing list, got a reply by the list moderator rejecting my message,stating that there is no valid message from that address,sugesting yet another email address, it doubts the authenticity of your recomendation Remko, you sugested I should look into securing my emailserver installation by preventing unauthorized

Post Office wrote: > Sorry. Your message could not be delivered to: > > Jonathan DEL CAMPO /jdc/ .Y (Mailbox or Conference is full.) Would one of the list admins PLEASE remove this guy from the list? I've been getting NDRs from him for as long as I can remember... -- Best regards, Charles

Here is the scenario: I have one server with kernel 2.4.24 with a bridge br0 made of 2 interfaces, eth0 and tap0 (the last is an OpenVPN tunnel), and one remote computer connetting through tap0. If I assign a static IP to the remote computer, the bridge works perfecly (so I think the problem is not OpenVPN-related). If I start a DHCPd on the server and I configure the remote client to get the

Hai Marco, Yes, best is to use the "localhost" dns setup as caching/forwarder only. All you need is for the forwarding is : zone "your.dnsdomain.tld" { type forward; forwarders { IP_DC1; IP_DC2; }; }; zone "168.192.in-addr.arpa" { type forward; forwarders { IP_DC1; IP_DC2; }; }; If you think its still to slow, remove > options attempts:2

I will get a smbd process started. (If this is incorrect please let me know ;) But this morning I did a quick ps -ax on my machine and found *two* smbd -D in the process list. But as far as I know there is no connection to the samba server right now. I did connect to and disconnect from the server yesterday but I would think that that connection would have been released by now. Can anyone

I had a non-Angular Rails app with Devise powering the authentication. Almost all of it. However as we are moving it to AngularJS, had a question or two about how to integrate that with Angular. 1. What all parts of Devise can still be used? 2. What are best practices around how to maintain session in angular? 3. Also, how do I manage multiple roles(*based on 2 different models*,

For some reasons the afs tokenforwarding stuff has changed siginificantly from v 2.9p2 to 2.9.9p2. This makes it impossible to use public key authenticication in a standart AFS environment. I don't know the reasons for these changes. In any case attached is a patch which restores the old behaviour. Regards Serge -- Serge Droz Paul Scherrer Institut mailto:serge.droz at

Hello! I recently discoverd a problem with ssh.com's ssh-agent2 and OpenSSH: If I have more than one key in my agent, then the agent tries to authenticicate me with every one of them at the OpenSSH server; but none of them is a valid key for that server. The Problem is that the Server increments the authctxt->attempt at every of that tries. So even if you want to login with a password at