similar to: error mounting ocfs2 mountpoints

Does anyone have any idea what to try next? Here are the steps I have taken and the problem: (I wanted to post my question on the first line before I explained the problem and what I have tried) ---------- Node 0 has the file system mounted just fine and works great. When trying to mount on Node 1: `mount.ocfs2 /dev/mapper/data /cluster/ data` I get this error after about 30 seconds:

Hi All, I have a cluster of four nodes and one will not join the cluster. I have two IPs on each node, one external and one internal. I have tried changing around the IPs in the /etc/ocfs2/cluster.conf and that helped - at least I recovered three of the machines. Any suggestions on where else to look? Best Regards John (23359,2):o2net_connect_expired:1637 ERROR: no connection established with

Hi list, I am experimenting with ocfs2 (rpm package: 1.2.2-0.2), using linux-ha 2.0.8 (all running on a SLES 10 x86-64, rpm packages from linux-ha.org) for the heartbeat. The three nodes are connected on a gigabit switch. From time to time I have problems to unmount a drive, and I have to reboot the whole system to fix the problem. When these lockups occur, I see these messages in

All, We are having some problems getting OCFS2 to run, we are using kernel 2.6.15 with OCFS2 1.2.1. Compiling the OCFS2 sources went fine and all modules load perfectly. However, we can only mount the OCFS2 volume on one machine at a time, when we try to mount the volume on the 2 other machines we get an error stating that another node is heartbeating in our slot. When we mount the volume

Hey guys, I have a OCFS2 Cluster mounted at 4 xen-server (gentoo). Today I upgraded the xen-kernel for tests at one server (server2) from 2.6.34-xen to 2.6.38-xen-r1. After reboot the server couldn''t mount the ocsfs2 device anymore. ocfs2-tools version: sys-fs/ocfs2-tools-1.4.3 Modules are loaded and /config type configfs and /dlm type ocfs2_dlmfs are mounted. server2 ~ # mount

Hello! Hey didnt a setting for the 10 second network timeout get into the 2.6.20 kernel? if so how do we set this? I am getting OCFS2 1.3.3 (2201,0):o2net_connect_expired:1547 ERROR: no connection established with node 1 after 10.0 seconds, giving up and returning errors. (2458,0):dlm_request_join:802 ERROR: status = -107 (2458,0):dlm_try_to_join_domain:950 ERROR: status = -107

Hello, I am installing Two Node cluster when I automount the file systems I am getting o2net_connect_expired error and it is not mounting the cluster filesystems if I mount the cluster file systems manually as mount -a it is mounting the file systems without any issues. 1.If I bring Node1 up with Node2 to down cluster file system is automounting fine without any issues. 2.I checked the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Folks, I'm trying to wrap my head around something that happened in our environment. Basically, we noticed the error in /var/log/messages with no other errors. "Mar 16 13:38:02 dbo3 kernel: (3712,3):o2hb_do_disk_heartbeat:963 ERROR: Device "sdb1": another node is heartbeating in our slot!" Usually there are a

Hello, I have a DELL MD3000i, and a couple of servers that I want to connect to the array. I have setup the main server with CentOS 5. - 2.6.18-53.el5 x86_64 - ocfs2-tools-1.2.7-1.el5 - ocfs2console-1.2.7-1.el5 - ocfs2-2.6.18-53.el5-1.2.8-2.el5 # Kernel Module And two OpenSuSe 10.3 Servers - 2.6.22.5-31-default x86_64 - ocfs2-tools-1.2.6-18 - ocfs2console-1.2.6-18 The module has been already

OS: Fedora Core release 4 (Stentz) KERNEL: Linux rack1.ape 2.6.17-1.2142_FC4smp #1 SMP Tue Jul 11 22:57:02 EDT 2006 i686 i686 i386 GNU/Linux CLUSTER: 11 Linux kernels, mixed environment FC4,FC5,FC6 SAN: FC Infortrend storage, QLogic16 port FC switch, FC adapter LSI FC929X (21224,1):ocfs2_truncate_file:242 ERROR: bug expression: le64_to_cpu(fe->i_size) != i_size_read(inode)

On a fresh reboot free: total used free shared buffers cached Mem: 3371340 448156 2923184 0 5328 77840 ---------- top: Mem: 3371340k total, 449044k used, 2922296k free, 5344k buffers ---------- xentop - 01:44:00 Xen 3.4.3-rc4-pre 1 domains: 1 running, 0 blocked, 0 paused, 0 crashed, 0 dying, 0 shutdown Mem: 4160828k total, 4022996k used, 137832k free CPUs: 4

Hi, Everything compiled correctly for the ocfs2 package, but so far the modules will not load with the "well known" module symbol error. FATAL: Error inserting ocfs2 (/lib/modules/2.6.16.27-0.6-smp/kernel/fs/ocfs2/ocfs2.ko): Unknown symbol in module, or unknown parameter (see dmesg) Okay not sure what is up here, any suggestions? BTW, this is the correct module location and I

Hi everyone, here's my problem: I have a fast server (dual Xeon E5-2620, 64 GB RAM) with a fast RAID array (24 disks, RAID-6, more than 2GB/s read/write local performance, XFS filesystem) and fast network : dual 10GigE (myri10g) and 40GigE (i40e). It's running Debian 8.11, tried various kernel versions (currently 4.4.x, but 4.9 isn't any better). It's slow as dead snails in

On Thu, 10 Aug 2017 19:21:53 +0200 Emmanuel Florac via samba <samba at lists.samba.org> wrote: > > Hi everyone, > > here's my problem: I have a fast server (dual Xeon E5-2620, 64 GB RAM) > with a fast RAID array (24 disks, RAID-6, more than 2GB/s read/write > local performance, XFS filesystem) and fast network : dual 10GigE > (myri10g) and 40GigE (i40e). >

Bugs item #11708, was opened at 2007-06-20 06:53 You can respond by visiting: http://rubyforge.org/tracker/?func=detail&atid=218&aid=11708&group_id=35 Category: Incorrect behavior Group: v0.4 Status: Open Resolution: None Priority: 3 Submitted By: Nobody (None) Assigned to: Kevin Smith (qualitycode) Summary: Wx::TreeCtrl#on_compare_items can not work Initial Comment: require

Hi, I'm trying to write a compiler for a language that seems useful. I decided to target LLVM and write the compiler to just print out IR as text, instead of using the API's. This allows me to focus on the IR instead of having to learn the API as well, which kind of seems like an extra obstacle at this point. Anyway, writing out IR seems like a nice enough way to learn LLVM, except that

Hi! On my FreeBSD 12.0-RELEASE-p7 server I was unable to retrieve the correct information from my two UPS. Every time only the first UPS will returned when I entering "upsc apc900" or "upsc apc901". I don't know why (Bug or configuration issue on my side?!). I have downloaded the latest source code and with my "patch" I was able to get the right information

I have two R objects, allDataSubset1 and allDataSubset2 and the str of both of them is shown below ( I don't show all 18 lists for space purposes ). The difference between them is that the times ( and possibly the days ) and the data is different and what I want to do is merge them so that only the data in Subset2 that is the same day and times as Subset 1 remains in the merged dataset.

Hi, I am using Dovecot 1.0 beta 7, moving to beta8 probably tomorrow. I am seeing a few RFC compliance issues with IMAP responses. I have an in-house IMAP client that caches IMAP data for a web mail system (it parses millions of IMAP interactions a day), and it reports whenever it gets a line that does not look RFC compliant. Unfortunately, users modify their mailboxes before I can get a copy

I'm using nbdkit + the file plugin to serve NBD root filesystems for some machines, so I get to observe how it behaves for very long runs. I think this indicates a memory leak? PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 5038 root 20 0 4577220 16000 796 S 0.0 0.1 30:52.40 nbdkit 5592 root 20 0 4159224 11708 784 S 0.0 0.1 22:21.67