similar to: ocfs2console is slow

We are getting some pushback from our SA group regarding root having ssh user equivalence on the cluster where we run OCFS2. Is it required to have the ssh user equivalence setup for the root user when running OCFS2 ? Thanks in advance, Reid Reid McKinley ******************************************************************************************** This message, including any

Upon system boot, is it ok to mount OCFS2 mounts from /etc/rc.local rather than /etc/fstab ? Are there any downsides to using rc.local that you are aware of? Example /etc/rc.local script: #!/bin/sh # # This script will be executed *after* all the other init scripts. # You can put your own initialization stuff in here if you don't # want to do the full Sys V style init stuff.

hi, i am trying to install oracle rac on fedora core 6 through iscsi. when i try to mount, mount.ocfs2: Invalid argument while mounting /dev/mapper/rac-crs on /mnt/crs. Check 'dmesg' for more information on this error. error log in dmesg, ocfs2: Unmounting device (253,11) on (node 255) (27354,0):ocfs2_parse_options:753 ERROR: Unrecognized mount option "datavolume" or missing

I received the following error messages in the system logs. Is this anything to be concerned with? kernel: (4074,0):ocfs2_populate_inode:234 ERROR: Invalid dinode: i_ino=1293597, i_blkno=1293597, signature = INODE01, flags = 0x0 kernel: (4074,0):ocfs2_read_locked_inode:389 ERROR: populate inode failed! i_blkno=1293597, i_ino=1293597 kernel: (4074,0):ocfs2_iget:131 ERROR: status = -116

Hi everybody, My problem is that I want to add a new node to an existing RAC with ocfs2, without stop the database. If I add a new node to an existing ocfs cluster, do I need to stop the ocfs in the others nodes of the cluster? I've tried to do it without stop the ocfs in the others nodes but I get the following error:

Hello, I have a DELL MD3000i, and a couple of servers that I want to connect to the array. I have setup the main server with CentOS 5. - 2.6.18-53.el5 x86_64 - ocfs2-tools-1.2.7-1.el5 - ocfs2console-1.2.7-1.el5 - ocfs2-2.6.18-53.el5-1.2.8-2.el5 # Kernel Module And two OpenSuSe 10.3 Servers - 2.6.22.5-31-default x86_64 - ocfs2-tools-1.2.6-18 - ocfs2console-1.2.6-18 The module has been already

Hi, we are using a SLES10 Patchlevel 3 with 12 Nodes hosting tomcat application servers. The cluster was running some time (about 200 days) without problems. Recently we needed to shutdown the cluster for maintenance and experianced very long times for the umount of the filesystem. It took something like 45 minutes each node and filesystem (12 x 45 minutes shutdown time). As a result the planned

Hi, I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. My problem is that all the time when i try to run /etc/init.d/o2cb stop it fails with this error: Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active There is no active mount point. I tried to manually stop the heartdbeat with

hello, I'm running Ubuntu Breezy with the OCFS2 modules in the standard kernel. I installed ocfs2console and ocfs2-tools I've formatted a partition with ocfs2. But I can't add any node or mount the device(with the ocfs2console). because I get a "Unable to access cluster service" I can't find the cause nor the solution to this. root@lenaeja:~# /etc/init.d/o2cb status

Hello All, We're hosting DB1 and DB2 with db_block_size set to 8K, 16K respectively File system creation is done with mkfs.ocfs2 -b 4K -C 32K -N 4 -L LABLE /dev/mapper/xxxx Mount is done with: ocfs2 _netdev,datavolume,nointr 0 0 I'd like to know if we can separate most of the tablespaces on different LUNs, even if they're on the same disk group sometimes, is it

I get the following error when trying to mount: Nothing changed (in any case not that I know of). I get the same error from both nodes. Please assist. # mount /u02 mount.ocfs2: Invalid argument while mounting /dev/sdd1 on /u02. Check 'dmesg' for more information on this error. /etc/fstab: /dev/sdd1 /u02 ocfs2 _netdev,datavolume,nointr 0 0

I've configured a text Xen system using ocfs2 1.4.1 as the shared filesystem to enable migration. So far the file based xen disk sharing is working well. Yesterday I tried to do a "xm save vm /ocfs2/vm.save" and I keep getting the following message: __ocfs2_file_aio_write:2185 ERROR: status = -14 The file created is only 9113 bytes long where it should be about 2 GB i.e.

Hi, I'm new to this list and to the ocfs2 system and to clustering in general (3 strikes?--ack!). I have some problems with my first attempt at configuring an ocfs2 system and need some perspective. My setup is a Compaq Proliant CL380 2 node cluster with a shared storage array. Both nodes are currently running SLES 10. However, I am just trying to get one node working. I have read the

Error: mount.ocfs2: Transport endpoint is not connected while mounting /dev/sdc1 on /u02, could not mount /dev/sdc1. The installation step is: 1. install all rpms on int-rac1, int-rac2 2. interconnect int-rac1, int-rac2, ping each other using private ip and public ip ok. Add EMC SAN as shared disk and visable for two nodes. 3. configure int-rac1 using ocfs2console, add two nodes 4. according

I'm using ocfs2 and all modules from Suse (SLES9), no self compilations. Here are the details: * 32-bit machine (writing to ocfs2 partition/LUN and where the corruption was reported): Kernel: 2.6.5-7.257-bigsmp #1 SMP i686 i386 GNU/Linux OCFS2 rpms: ocfs2console-1.2.1-4.2 ocfs2-tools-1.2.1-4.2 o2cb_ctl -V: o2cb_ctl version 1.2.1 /etc/init.d/o2cb status: Module "configfs":

Hi, I want to share a partition of an external disk between 3 machines. It is located on a Sun StoreTek 3510 and bound (via multipathing) to all 3 machines. One machine (say mach1) is the node I used to create the filesystem and setup /etc/ocfs2/cluster.conf. I copied the file to the other 2 machines. All use the same /etc/multipath.conf[1], too. All start /etc/init.d/ocfs2 at boot, all are

Hi, i have a trouble with a ocfs2 partition. The "df -kh" command reports 63 GB of free space but only can use about 5 GB of this free space !! Then, the ocfs2 partition is wasting 58 GB of free space !!? df -kh S.ficheros Tama?o Usado Disp Uso% Montado en /dev/sda1 300G 238G 63G 80% /home/mail This are the mount options of the partition: mount /dev/sda1 on

Hello all, I'm having trouble compiling ocfs2-tools-1.6.3 on slackware64-13.1 These are my configure flags (the last 2 I added after googling this problem, but didn't help): ./configure \ --sbindir=/sbin \ --bin=/bin \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ --datadir=/etc/ocfs2 \ --sharedstatedir=/var/ocfs2 \ --libexecdir=/usr/libexec \

Hi I have: SLES 10 SP2 (2.6.16.60-0.21-smp) ocfs2-tools-1.4.0-0.3 ocfs2console-1.4.0-0.3 and I can't change "heartbeat dead threshold" value. Content of /etc/sysconfig/o2cb: # O2CB_ENABLED: 'true' means to load the driver on boot. O2CB_ENABLED=true # O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start. O2CB_BOOTCLUSTER=ocfs2 # O2CB_HEARTBEAT_THRESHOLD:

I've got a fresh RHEL AS 4-U2 installation on a Dell PE2850 server. I downloaded and installed the latest RPMs: ocfs2-2.6.9-22.ELsmp-1.0.7-1.i686.rpm ocfs2-tools-1.0.2-1.i386.rpm ocfs2console-1.0.2-1.i386.rpm I was able to start the console, but when I try to run cluster->configure_nodes, I get the following error message: Could not start cluster stack. This must be resolved before any