similar to: Antwort: Re: Source for OCFS Support Package

Studying /etc/init.d/ocfs, I just realized KVER probably had to be specified as 2.4.21-15.ELorafw1. Like I said, I am far from being a Linux expert. Regards, Roland -------------- next part -------------- An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs-users/attachments/20040808/611120a6/attachment.htm

Hello, I want to use ocfs for a 10g RAC installation on a 2 node cluster, consisting of 1 Athlon and 1 Pentium machine with Firewire storage. OS is RHAS 3. Since I need to build my own binary Athlon rpm's, I downloaded ocfs-1.0.12.tar.gz ocfs-tools-1.0.10.tar.gz I was able to install both (./configure ; make - make install). When I try to load_ocfs I get lots of errors

Hi All, I am getting this error after updating RHEL 3 Update 5 to update 8.. After upgrading OCFS loading get failed boot.log entries Nov 10 06:00:00 HHMEA load_ocfs: modprobe: Can't locate module ocfs Nov 10 06:00:00 HHMEA load_ocfs: load_ocfs: insmod failed Nov 10 06:00:01 HHMEA ocfs:  failed Nov 10 06:00:01 HHMEA mount: mount: fs type ocfs not supported by kernel I had given depmod

I successfully have OCFS running in a two-node RAC environment using RHAS 3 (2.4.21-4.EL) using Qlogic 2310 cards. IO performance, however, was terrible with the combination of OCFS and the Qlogic cards. After extensive testing, OCFS did fine on its own, as did the fibre cards. Put the two together, and everything literally ran twice as slow. Support at Qlogic pointed me to

# uname -r 2.4.21-20.ELsmp [root@hp2620-2 root]# rpm -qa | grep ocfs ocfs-tools-1.0.10-1 ocfs-support-1.0.10-1 ocfs-2.4.21-EL-1.0.13-1 [root@hp2620-2 root]# /sbin/load_ocfs /sbin/insmod ocfs node_name=hp2620-2-eth1 ip_address=10.1.2.101 cs=1913 guid=8D65C7CEECF9EBE638BD0013215BD6E9 comm_voting=1 ip_port=7000 insmod: ocfs: no module by that name found load_ocfs: insmod failed [root@hp2620-2 root]#

I have set up an ocfs system using two linux nodes connected using firewire. Details: # uname -a Linux testrac2 2.4.21-9.0.1.ELorafw1 #1 Tue Mar 2 14:42:46 PST 2004 i686 i686 i386 GNU/Linux # cat /etc/issue Red Hat Enterprise Linux ES release 3 (Taroon Update 1) # rpm -qa |grep ocfs ocfs-tools-1.1.2-1 ocfs-2.4.21-EL-1.0.12-1 ocfs-support-1.1.2-1 <> Oracle version: 9.2.0.5 Cluster

>also - for async io ; >p2448994_9204_LINUX.zip is the patch to apply for oracle >(this is metalink ARU patch number). Wim, The patch description on Metalink says: DIRECT IO SUPPORT ON EXT2 FILESYSTEM Which wasn't quite what I was expecting. Kevin -----Original Message----- From: Wim Coekaerts [mailto:wim.coekaerts@oracle.com] Sent: 25 November 2003 03:23 To: Brian M. Diehl

Looking for any ideas where I need to look to fix this: I'm installing RHEL3 AS (update 4) on Dell PowerEdge 6850's. I've installed the hugemem kernels on these boxes and need to install and run ocfs. Kernel: ------- 2.4.21-27.0.4.ELhugemem Loaded the ocfs rpm's --------------------- # rpm -qa | grep ocfs ocfs-2.4.21-EL-smp-1.0.14-1 ocfs-support-1.1.5-1 ocfs-2.4.21-EL-1.0.14-1

Hello, I'm trying to implement the Oracle RAC on a firewire shared disk. I've patched the kernel (for multiple login firewire support), and both nodes can see the shared disk. Then, i've installed the files necessary for ocfs: ocfs-2.4.20-smp-1.0.8-4.i386.rpm ocfs-support-1.0.8-4.i386.rpm ocfs-tools-1.0.8-4.i386.rpm However, when i do a '/sbin/load_ocfs' this is what i get:

Well, I've compiled and installed Kernel 2.4.9-37 uniprocessor. I've made ocfs setup using version 1.0.9-9 uniprocessor. I've generated ocfs.conf using ocfstool. When I start ocfs using /etc/init.d/ocfs start, I receive the following errors: [root@RAC1 root]# /etc/init.d/ocfs start Loading OCFS: /sbin/insmod ocfs node_name=RAC1.localdomain ip_address=192.168.61 2 ip_port=7000

>> I checked my /etc/group for irregular entries and repaired >> all of them. Since then the problem didn't occur any more. >> Even so it wasn't very frequent. >> >> I still have a bunch of strace logs of smbd and of nscd. >> Cann I upload it somewhere for you if you can use it? >> >> Or do you suggest to replant the erroneous entries and

Hi # lslpp -l perl.rte Fileset Level State Description ---------------------------------------------------------------------------- Path: /usr/lib/objrepos perl.rte 5.8.0.0 COMMITTED Perl Version 5 Runtime Environment # lppchk -vm3 # perl -V Summary of my perl5 (revision 5.0 version 8 subversion

Hello everyone, so no one has any idea what causes this problem? :-( Nils Von: Nils Wieseloh via samba <samba at lists.samba.org> An: Brian Cowan <brian.cowan at hcl.com>, Kopie: "samba at lists.samba.org" <samba at lists.samba.org>, samba <samba-bounces at lists.samba.org> Datum: 28.07.2017 08:44 Betreff: [Samba] Antwort: Re: Windows 10 and

Hai, Dit you set : acl allow execute always = yes Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Nils > Wieseloh via samba > Verzonden: vrijdag 8 september 2017 9:43 > Aan: nils.wieseloh at vit.de > CC: samba at lists.samba.org; Brian Cowan; samba > Onderwerp: [Samba] Antwort: Antwort: Re: Windows 10 and

I followed your instruction to compile OCFS and received the following errors: [root@RAC1 ocfs-1.0.11]# ./configure --with-kernel=/usr/src/linux-2.4.9-e.38/linux checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are

Hi there, After updating a server from CentOS 5.3 to 5.4 my Xen pci-passthru setup has some troubles. The server has two NICs, one used by dom0 and the other assigned to a domU and one SCSI controler assigned to another domU. It has been working fine since CentOS 5.1, when I did the initial setup. After upgrading to 5.4, I get this error when starting the domU with one of the NICs assigned:

Hi, i agree with Stefan. I have the same problem with Win2K Client and SAMBA Server. But on my situation i have one PC that i can make a connect and all the other not. Alle workstation are on the same group, are all in the same SubNet; but i can?t see my SAMBA _ Server so well like on this machine that is working. So is there any other problems on SAMBA ? Kind regards Matthias

Hi I've finished and tested a patch to add src routines to openssh (based on the Redbook "Writing Reliable AIX Daemons") Since a few days I have the O.K. to post it on the list, but I still want to splitt my patch file into logical parts (SRC/Logging/Datatype fixes) Frank Datum: 06.09.2001 19:04 An: Denise Genty <genty at austin.ibm.com> Kopie:

> Von: Rowland Penny via samba <samba at lists.samba.org> > An: samba at lists.samba.org > Datum: 22.09.2016 15:14 > Betreff: Re: [Samba] Antwort: Re: permissions of new files and directories > Gesendet von: "samba" <samba-bounces at lists.samba.org> > > On Thu, 22 Sep 2016 14:36:34 +0200 > Philipp Snizek via samba <samba at lists.samba.org>

As I said before, I'm not a linux expert. In which file of kernel source can I look for any missing code ? And specially what do I have to check ? __________________________________________ Mauro Staretz - MI Montreal Inform?tica Ltda Microsoft MCSE+I / MCDBA / MCP - Oracle OCP Tel: 55-21-2291-6116 R.2104 Fax: 55-21-2533-6028 __________________________________________ -----Mensagem