similar to: when one of the server down ,the delay too long

When I installed gluster and do a "ps" on the process I see: /usr/sbin/glusterfs -f /etc/glusterd/nfs/nfs-server.vol -p /etc/glusterd/nfs/run/nfs.pid -l /var/log/glusterfs/nfs.log" My question is why did glusterfs use nfs-server.vol, nfs.pid and nfs.log instead of using some generic name. This is confusing and makes me think it's using nfs somehow on the server even though

Hello everybody. I have a problem setting up gluster failover funcionality. Based on manual i setup ucarp which is working well ( tested with ping/ssh etc ) But when i use virtual address for gluster volume mount and i turn off one of nodes machine/gluster will freeze until node is back online. My virtual ip is 3.200 and machine real ip is 3.233 and 3.5. In gluster log i can see: [2011-06-06

Hi ..., How does one deploy Gluster on a clustered storage i.e. two server nodes with a common storage array? Say one has, two server nodes connected to a common storage array, that exports 2 LUNs visible to both nodes. [ Server 1 ]------[ Storage ]------[ Server 2 ] Each server node mount a single LUN, but in case one of the node fails, the other node takes over the LUN. [ Server 1

Hi list, is it possible to add multiple homedir templates to smb.conf ? I have a running linuxsystem where homefilesets are mounted from different windows-servers to subdirs like: /home/server01/home/USERNAME /home/server02/home/USERNAME /home/server03/home/USERNAME The users come via winbind. In the smb.conf the entry for the homedir: template homedir = /home/%U So how is it possible to

Hi, I'am new to ocfs2 filesystem and I have some questions about it. I installed three server according to the user guide from http://oss.oracle.com/projects/ocfs2/dist/documentation/v1.4/ocfs2-1_4-usersguide.pdf For every single server I have a working ocfs2 partition /dev/sdb1 on /mnt/oc1 type ocfs2 (rw,_netdev,heartbeat=local) As I understand the ocfs2 system I can use now these

Hi Rowland, The test environment is totally isolated and we testing with images of the client machines. We're just trying to iron out any issues post the PDC role move. We have a small list we are going through. The SSL bit is one of them. Once the new environment is stable, we'll be migratingto AD. Regards, Praveen Ghimire -------- Original message -------- From: Rowland Penny

Am 11.02.19 um 13:22 schrieb Rowland Penny via samba: > On Mon, 11 Feb 2019 12:30:51 +0100 > Matthias Leopold via samba <samba at lists.samba.org> wrote: > >> Hi, >> >> we are using a _single_ LDAP server as backend for _multiple_ Samba >> standalone file servers (security=user). This LDAP server serves >> mainly other purposes and access for Samba is

Am 11.02.19 um 14:22 schrieb Rowland Penny via samba: > On Mon, 11 Feb 2019 13:46:05 +0100 > Matthias Leopold via samba <samba at lists.samba.org> wrote: > >> >> >> Am 11.02.19 um 13:22 schrieb Rowland Penny via samba: >>> On Mon, 11 Feb 2019 12:30:51 +0100 >>> Matthias Leopold via samba <samba at lists.samba.org> wrote: >>>

Hi, we are using a _single_ LDAP server as backend for _multiple_ Samba standalone file servers (security=user). This LDAP server serves mainly other purposes and access for Samba is read only so the situation is not optimal but "it works for us". Still I don't understand one phenomenon concerning visibility of LDAP groups. The LDAP configuration in smb.conf for all our Samba

Hello ! I have joined my samba 3.0.32 samba server to a windows 2003 domain = controller. All works well and all users are mapped etc etc. Now is the server situated on a remote location. My question is can it handle domain logons for the remote location or = can this only be done by the 2003 server. the reason is that the connection between both locations is sometimes = out of order. =20

Hi! Seeking pardon from the experts, but I have a basic usage question that I could not find a straightforward answer to. I have a two node cluster, with two bricks replicated, one on each node. Lets say one of the node dies and is unreachable. I want to be able to spin a new node and replace the dead node's brick to a location on the new node. The command 'gluster volume

Hi On 5.3 i have a situation where some boxes have been 3 or 4 seconds out and restarting ntpd has fixed the issue. What i dont understand is why the clocks did not drift to the correct time when the config seems correct in that restarting ntp did correct the time. Is there something 'special' i need to do in order for the drift to work? $ cat /etc/ntp.conf restrict default

Hi, I haven't found anything about the message below on the mailing list, Does anyones knows why this notice is being appearing? -- Executing Dial("Local/912365533643@default-f348,2", "IAX2/CallOut/12365533643|30|otT") in new stack -- Called CallOut/12365533643 -- Call accepted by 12.11.11.11 (format ulaw) -- Format for call is ulaw --

hi folks, after long trying i need some help from the big world :-) question ******** when I boot a guest system, tried debian 6.0.2 amd64 firmware, I get errors like: 1) after click install on debian 6.0.2 installer [0.642450] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632 [0.642911] vbd vbd-5632: failed to write error node for device/vbd/5632 (19 xenbus_dev_probe on device/vbd/5632) 2)

hi folks, after long trying i need some help from the big world :-) question ******** when I boot a guest system, tried debian 6.0.2 amd64 firmware, I get errors like: 1) after click install on debian 6.0.2 installer [0.642450] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632 [0.642911] vbd vbd-5632: failed to write error node for device/vbd/5632 (19 xenbus_dev_probe on device/vbd/5632) 2)

Am 11.02.19 um 16:33 schrieb Rowland Penny via samba: > On Mon, 11 Feb 2019 15:40:02 +0100 > Matthias Leopold via samba <samba at lists.samba.org> wrote: > >> >> >> Am 11.02.19 um 14:22 schrieb Rowland Penny via samba: >>> On Mon, 11 Feb 2019 13:46:05 +0100 >>> Matthias Leopold via samba <samba at lists.samba.org> wrote: >>>

config smb.conf [global] realm = DOMAINB workgroup = DOMAINB security = ADS template homedir = /home/%U template shell = /bin/bash winbind expand groups = 1 winbind separator = + winbind use default domain = Yes idmap config domainb : range = 3000001 - 4000000 idmap config domainb : backend = rid idmap config domainc : range = 2000001 - 3000000 idmap config domainc : backend = rid

I have an OpenLDAP backend, Samba knows how to talk to it, my Samba users are stored in LDAP and file shares work fine authenticating to the LDAP server. I tried executing smbldap-useradd -w server02 on the command-line and got the following error: failed to perform search; Can't contact LDAP server at /usr/lib/perl5/vendor_perl/5.8.7/smbldap_tools.pm line 362, <DATA> line 283. Error

Hi, I have 2 Servers with samba 4.17 compiled and sincronzid. The too work as file server as well. The contente of the file server os in mirror with drbd. When the server01 is shutdown and server02 start t? work It show ALL the users and groups folders correctly but without access for the users in the Windows clients members. I know that It is recommended to use another member server as file

Hi all. What is the best hardware configuration to handle this following scenario? - 4 IVR menu with conference applications for each option; - Only SIP/g711 user access - 3500 simultaneous users(800 at the beginning) - No ZAP channels Where is the most important point of failure? CPU? Ethernet? RAM? Im planning to separate in three servers: Server01: 01 Xeon 3Ghz getting the 1st level of