similar to: Why does glusterfs has nfs stuff on the server

Hi all, I setup the gluster filesystem and I want to mount the gluster volume using nfs in unix system. My machine is hp-ux (11.23) I put command like below but it has error test14:/>mount -F nfs -o proto=tcp,port=38465,vers=3,llock 150.2.226.26:/temp /mnt nfs mount: get_fh: 150.2.226.26:: RPC: Program not registered nfs mount: get_fh: 150.2.226.26:: RPC: Program not registered nfs mount:

Howdy, I have a GlusterFS 3.1 volume being mounted on a client using NFS. From the client I created a directory under the mount point and set the permissions to root:groupa 750 My user account is a member of groupa on the client, yet I am unable to list the contents of the directory: $ ls -l /gfs/dir1 ls: /gfs/dir1/: Permission denied $ ls -ld /gfs/dir1 rwxr-x--- 9 root groupa 73728 Nov 9

Hello, Were having issues with macs writing to our gluster system. Gluster vol info at end. On a mac, if I make a file in the shell I get the following message: smoke:hunter david$ echo hello > test -bash: test: Operation not permitted And the file is made but is zero size. smoke:hunter david$ ls -l test -rw-r--r-- 1 david realise 0 Mar 3 08:44 test glusterfs/nfslog logs thus:

I have two GlusterFS server and the volume status is replica . The add of them are server01:192.168.1.10 and server02:192.168.1.11 . The client mount the server01'vol and I can use the GLusterFS usually. Now, l am reading the file on the glusterfs volume usually, the server02's interface down suddenly ? and the client is also down. It will resume after a delay(about 10s),I think

Hello, I am trying to configure a volume using DHT, however after I mount it, the mount point looks rather strange and when I try to do 'ls' on it I get: ls: /mnt/gtest: Stale NFS file handle I can create files and dirs in the mount point, I can list them but I cant list the mount point itself. Example: the folume is mounted on /mnt/gtest [root at storage2]# ls -l /mnt/ ?---------

Hello everybody. I have a problem setting up gluster failover funcionality. Based on manual i setup ucarp which is working well ( tested with ping/ssh etc ) But when i use virtual address for gluster volume mount and i turn off one of nodes machine/gluster will freeze until node is back online. My virtual ip is 3.200 and machine real ip is 3.233 and 3.5. In gluster log i can see: [2011-06-06

Hi! Seeking pardon from the experts, but I have a basic usage question that I could not find a straightforward answer to. I have a two node cluster, with two bricks replicated, one on each node. Lets say one of the node dies and is unreachable. I want to be able to spin a new node and replace the dead node's brick to a location on the new node. The command 'gluster volume

Hi, community I have a large distributed-replicated Glusterfs volume, that contains few hundreds VM's images. Between servers 20Gb/sec link. When I start some operations like healing or removing, storage performance becomes too low for a few days and server load becomes like this: 13:06:32 up 13 days, 20:02, 3 users, load average: 43.62, 31.75, 23.53. Is it possible to set limit on

Hi at all! i'm trying to use glusterfs for the first time and have the following problem: I want to have two nodes. On node1 I have a raid1-sytem running in /raid/storage Both nodes see the other and now I try to create a volume. While I create the first volume on a fresh system (node1) for the first time, gluster said: volume create: glustervolume: failed: /raid/storage/ or a prefix of it

Adding Mohit who is experimenting with cgroups has found some way to restrict glustershd's CPU usage using cgroups. Mohit maybe you want to share the steps we need to follow to apply cgroups only to glustershd. Thanks. Ravi On 08/01/2017 03:46 PM, Alexey Zakurin wrote: > Hi, community > > I have a large distributed-replicated Glusterfs volume, that contains > few hundreds

Hello I want to use GlusterFS as a nfs substitute for a FreeBSD Server and Linux clients. The FreeBSD-server should export several directories. One of these directories contains the home-directory for the client-mashines. The problem is that my GlusterFS setup isn't very stable and crashes quite often. It is less stable, when more than one volume is mounted, but even when only one volume is

Hi ..., How does one deploy Gluster on a clustered storage i.e. two server nodes with a common storage array? Say one has, two server nodes connected to a common storage array, that exports 2 LUNs visible to both nodes. [ Server 1 ]------[ Storage ]------[ Server 2 ] Each server node mount a single LUN, but in case one of the node fails, the other node takes over the LUN. [ Server 1

I have posted this to the lists purely to help others - please do not consider any of the following suitable for a production environment and follow these rough instructions at your own risk. Feel free to add your own additions to this mail posting as this may or may not work for everybody! I will not be held responsible for data loss, excessive CPU or mem usage etc etc etc... INSTALL NEEDED

An HTML attachment was scrubbed... URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20110512/765c02a7/attachment.html>

I ran the same dd tests from KnowYourNFSAlpha-1.pdf and performance is inconsistent and causes the server to become unresponsive. My server freezes every time when I run the following command: dd if=/dev/zero of=garb bs=256k count=64000 I would also like to mount a path like: /volume/some/random/dir # mount host:/gluster/tmp /mnt/test mount: host:/gluster/tmp failed, reason given by server: No

You can still get them from https://buildlogs.centos.org/centos/7/storage/x86_64/gluster-3.13/ (I don't know how much longer they'll be there. I suggest you copy them if you think you're going to need them in the future.) n 05/15/2018 04:58 AM, Davide Obbi wrote: > hi, > > i noticed that this repo for glusterfs 3.13 does not exists anymore at: > >

Hi Jose, There is a known issue with gluster 3.12.x builds (see [1]) so you may be running into this. The "shared-brick-count" values seem fine on stor1. Please send us "grep -n "share" /var/lib/glusterd/vols/volumedisk1/*" results for the other nodes so we can check if they are the cause. Regards, Nithya [1] https://bugzilla.redhat.com/show_bug.cgi?id=1517260

Thanks Kaleb, any chance i can make the node working after the downgrade? thanks On Tue, May 15, 2018 at 2:02 PM, Kaleb S. KEITHLEY <kkeithle at redhat.com> wrote: > > You can still get them from > https://buildlogs.centos.org/centos/7/storage/x86_64/gluster-3.13/ > > (I don't know how much longer they'll be there. I suggest you copy them > if you think

On 05/15/2018 08:08 AM, Davide Obbi wrote: > Thanks Kaleb, > > any chance i can make the node working after the downgrade? > thanks Without knowing what doesn't work, I'll go out on a limb and guess that it's an op-version problem. Shut down your 3.13 nodes, change their op-version to one of the valid 3.12 op-versions (e.g. 31203) and restart. Then the 3.12 nodes should

Hi, Can u please explain for what purpose pacemaker cluster used here? Regards, Jiffin On Thursday 07 December 2017 06:59 PM, Tomalak Geret'kal wrote: > > Hi guys > > I'm wondering if anyone here is using the GlusterFS OCF resource > agents with Pacemaker on CentOS 7? > > yum install centos-release-gluster > yum install glusterfs-server