similar to: Weird issue with gluster mount

Did the logs provide any hints as to what the issue may be? Diego On Sat, Jun 3, 2017 at 12:16 PM, Diego Remolina <dijuremo at gmail.com> wrote: > Thanks for taking the time to look into this. Since we needed downtime > due to the gluster update, we also updated the OS, including samba. We > went from 4.2.x to 4.4.4 and many other packages for CentOS were > updated as well. OS

Hi, I have the following volume: Volume Name: virt_images Type: Replicate Volume ID: 9f3c8273-4d9d-4af2-a4e7-4cb4a51e3594 Status: Started Snapshot Count: 2 Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: virt3:/data/virt_images/brick Brick2: virt2:/data/virt_images/brick Brick3: printserver:/data/virt_images/brick (arbiter) Options Reconfigured: features.quota-deem-statfs:

Hi all It seems Mercurial doesn't work with "write behind" on. Any ideas? With write-behind -- root at dj1:~/mnt# gluster volume set conf performance.write-behind on Set volume successful root at dj1:~/mnt# hg clone http://projects.unbit.it/hg/uwsgi destination directory: uwsgi requesting all changes adding changesets transaction abort! rollback completed abort: integrity check

Hi all, I have a 5 drive RAIDZ volume with data that I''d like to recover. The long story runs roughly: 1) The volume was running fine under FreeBSD on motherboard SATA controllers. 2) Two drives were moved to a HP P411 SAS/SATA controller 3) I *think* the HP controllers wrote some volume information to the end of each disk (hence no more ZFS labels 2,3) 4) In its "auto

The command below was run on FreeBSD 7.2 with rsync-3.0.3. The command works but copies all files, i.e. no hard links created. rsync -vaxH --numeric-ids --delete --exclude=/home/apache/logs \ --link-dest=/mnt/200912/newharbor/home -e ssh newharbor.safeport.com:/home \ 201001/newharbor/home/ The command was run without the continuation breaks that I added for readability. The command

Hi Mauro, What version of Gluster are you running and what is your volume configuration? IIRC, this was seen because of mismatches in the ctime returned to the client. I don't think there were issues with the files but I will leave it to Ravi and Raghavendra to comment. Regards, Nithya On 29 December 2017 at 04:10, Mauro Tridici <mauro.tridici at cmcc.it> wrote: > > Hi All,

Hi All, any news about this issue? Can I ignore this kind of error message or I have to do something to correct it? Thank you in advance and sorry for my insistence. Regards, Mauro > Il giorno 29 dic 2017, alle ore 11:45, Mauro Tridici <mauro.tridici at cmcc.it> ha scritto: > > > Hi Nithya, > > thank you very much for your support and sorry for the late. > Below

Hello Glusterites, I have a volume that will not mount read/write. V3.10.3 on Centos 7, this is a replica-3 volume, mounted with the fuse client. This is in support of an Ovirt installation, but I've isolated the problem to Gluster. `gluster peer status` looks normal, as does a `gluster v status`. Server.allow-insecure is set to on. Notable from the client volume logs are the 'connection

Hi Nithya, thank you very much for your support and sorry for the late. Below you can find the output of ?gluster volume info tier2? command and the gluster software stack version: gluster volume info Volume Name: tier2 Type: Distributed-Disperse Volume ID: a28d88c5-3295-4e35-98d4-210b3af9358c Status: Started Snapshot Count: 0 Number of Bricks: 6 x (4 + 2) = 36 Transport-type: tcp Bricks:

I think it is safe to ignore it. The problem exists? due to the minor difference in file time stamps in the backend bricks of the same sub volume (for a given file) and during the course of tar, the timestamp can be served from different bricks causing it to complain . The ctime xlator[1] feature once ready should fix this issue by storing time stamps as xattrs on the bricks. i.e. all bricks

Hi Ravi, thank you very much for your support and explanation. If I understand, the ctime xlator feature is not present in the current gluster package but it will be in the future release, right? Thank you again, Mauro > Il giorno 02 gen 2018, alle ore 12:53, Ravishankar N <ravishankar at redhat.com> ha scritto: > > I think it is safe to ignore it. The problem exists due to the

Hi all, I installed glusterfs (version 3.1.3) with zfs-fuse (0.6.9) as the underlying filesystem. After renaming a file, I found the file duplicated. Following is my test scenario. root at ubuntu:/# zpool create tank /dev/sdb root at ubuntu:/# gluster volume create test-volume ubuntu:/tank/exp1 ubuntu:/exp2 root at ubuntu:/# gluster volume start test-volume root at ubuntu:/# mount -t glusterfs

Here is the process for resolving split brain on replica 2: https://access.redhat.com/documentation/en-US/Red_Hat_Storage/2.1/html/Administration_Guide/Recovering_from_File_Split-brain.html It should be pretty much the same for replica 3, you change the xattrs with something like: # setfattr -n trusted.afr.vol-client-0 -v 0x000000000000000100000000 /gfs/brick-b/a When I try to decide which

Hi all, How can one evaluate NAs in a numeric dataframe column? For example, I have a dataframe (demo) with a column of numbers and several NAs. If I write demo.df >= 10, numerals will return TRUE or FALSE, but if the value is "NA", "NA" is returned. But if I write demo.df == "NA", it returns as "NA" also. I know that I can remove NAs, but would like

I would like to know how to view a samba server on a different subnet than the client workstation resides. For example, I have a Samba 1.9.18p3 server in subnet 'a' and a NT 4.0 client in subnet 'b'. The Samba server does not show up when the NT client double-clicks on the Network Neighborhood. However, if the client does a Find:computer it will find the server, and shares can be

Hello, I just rsync'd my 1TB partitions formated with jfs filesystem containing ~720GB data. I saw -3G difference between source and destination which made me suspect possible dataloss. Also I had experienced loss of integrity on my previous copies but I did not find the cause until now. As command line I used following: sh-3.2# rsync --verbose --sparse --append-verify --fuzzy --progress

Dear Gluster Users, I implemented a distributed disperse 6x(4+2) gluster (v.3.10.5) volume with the following options: [root at s01 tier2]# gluster volume info Volume Name: tier2 Type: Distributed-Disperse Volume ID: a28d88c5-3295-4e35-98d4-210b3af9358c Status: Started Snapshot Count: 0 Number of Bricks: 6 x (4 + 2) = 36 Transport-type: tcp Bricks: Brick1: s01-stg:/gluster/mnt1/brick Brick2:

Hi Ashish, thank you for your answer. Do you need complete client log file only or something else in particular? Unfortunately, I never used ?bt? command. Could you please provide me an usage example string? I will provide all logs you need. Thank you again, Mauro > Il giorno 26 set 2017, alle ore 09:30, Ashish Pandey <aspandey at redhat.com> ha scritto: > > Hi Mauro, > >

Hi Ashish, in attachment you can find the gdb output (with bt and thread outputs) and the complete log file until the crash happened. Thank you for your support. Mauro Tridici > Il giorno 26 set 2017, alle ore 10:11, Ashish Pandey <aspandey at redhat.com> ha scritto: > > Hi, > > Following are the command to get the debug info for gluster - > gdb

Hello. We've started a virtualisation project and got stuck in one moment. Currently we are using the following: Intel 2312WPQJR as a node Intel R2312GL4GS as a storage with Intel Infiniband 2 ports controller Infiniband Mellanox SwitchX IS5023 for commutation. The nodes run CentOS 6.5 with built-in Infiniband package (Linux v0002 2.6.32-431.el6.x86_64), the storage - CentOS 6.4 also built-in