similar to: xen

Hello, i will describe my approach 1) I have downloaded Centos5-64bit xen image from jailtime.org 2) I have created own swap image with 512MB file size 3) I have used same as dom0 kernel 2.6.18-53.1.19.el5xen 4) I have mounted my image file and copied /lib/modules/2.6.18-53.1.19.el5xen 5) I have created custom ramdisk for domU with mkinitrd --with=xennet --preload=xenblk

I am having an issue getting a DomU to boot properly. There is never any indication of a stop error or kernel panic, it simply hangs after "Starting crond [ OK ]" and never continues. I''ve included my mkinitrd and output from xm create... please help! ##### XENBUS errors ##### XENBUS: Device with no driver: device/vbd/2049 XENBUS: Device with no driver: device/vbd/2050

Hello Dear everybody! I just installed CentOS 5.3 and try the built-in Xen 3.1 with it. But even the typical ttyLinux doesn''t work when the domain is created.-- it just doesn''t give me the login prompt while the domain ttylinux is booted. [root@soe-hd513-pc102 nimbus]# xm create ttylinux-xen.conf -c Using config file "./ttylinux-xen.conf". Started domain ttylinux

Here you go, from the newest version: ************************************************************ * IMPORTANT NOTICE * * When reporting bugs, include the COMPLETE, UNEDITED * output below in your bug report. * ************************************************************

HI, On a RHEL5 box, i tried to directly run guest which was issued by libguestfs virt-xxx commands as below. But after some minutes, it exited exceptionally. Does anyone also hit the issue or know the reason? #/usr/bin/qemu-kvm -global virtio-blk-pci.scsi=off -nodefconfig -nodefaults -nographic -drive file=ubuntu1204_64_20G_aliaegis_20140811.vhd,snapshot=on,if=virtio -drive

Why??? I was/am running kernel 2.6.18-128.1.6.el5 I did a yum update and watched 2.6.18-128.1.6.el5xen and 2.6.18-128.1.6.el5PAE being installed, with PAE listed first in my /boo/grub/menu.lst I also see: Installing: kmod-fuse i686 2.7.4-1.el5.rf rpmforge 26 k replacing dkms-fuse.noarch 2.7.4-1.nodist.rf kmod-fuse-PAE i686

On Sun, Sep 28, 2014 at 11:04:11PM +0800, Zhi Yong Wu wrote: > On Sun, Sep 28, 2014 at 6:48 PM, Richard W.M. Jones <rjones@redhat.com> wrote: > > On Sun, Sep 28, 2014 at 06:33:53PM +0800, Zhi Yong Wu wrote: > >> On Sun, Sep 28, 2014 at 6:26 PM, Richard W.M. Jones <rjones@redhat.com> wrote: > >> > Which version of libguestfs is this? I think you'll

On Sun, Sep 28, 2014 at 11:31 PM, Richard W.M. Jones <rjones@redhat.com> wrote: > On Sun, Sep 28, 2014 at 11:04:11PM +0800, Zhi Yong Wu wrote: >> On Sun, Sep 28, 2014 at 6:48 PM, Richard W.M. Jones <rjones@redhat.com> wrote: >> > On Sun, Sep 28, 2014 at 06:33:53PM +0800, Zhi Yong Wu wrote: >> >> On Sun, Sep 28, 2014 at 6:26 PM, Richard W.M. Jones

Hello Can anyone share a known working config for xen which would transfer a serial interface ( add-on card preferably, mine uses e880-e887 : 0000:03:05.0 / ec00-ec07 : 0000:03:05.0 ) to a DomU ? I've been trying with the stock packages from Centos 5.5 ( fully updated) and also with gitco's 3.4.3 but after 2 days of googling and testing we still fail to access the serial

On Thu, Mar 08, 2018 at 06:41:57AM -0600, Steve Keller Savvco wrote: > [41300ms] /usr/libexec/qemu-kvm \ > -global virtio-blk-pci.scsi=off \ > -nodefconfig \ > -nodefaults \ > -nographic \ > -machine accel=kvm:tcg \ > -cpu host,+kvmclock \ > -m 500 \ > -no-reboot \ > -kernel /var/tmp/.guestfs-0/kernel.21046 \ > -initrd

Ok So I''ve been able to successfully create a CentOS5 virt-install on xen using LVM created partitions. But have many problems trying to install 4.4 (It does not work with virt-install hence you have to try another method). I Created a name, name-tmp, name-swap, name-root paritions. I did mke2fs and mkswap no problem everything is good. I went on further to mount the name-tmp and

I have a couple Debian 6 HVM VMs. From what I''ve read, Debian 6''s standard kernels have pv_ops already enabled. I''d like to convert these to pv for the following reasons (Assuming both of are valid expectations): 1) so the VMs use pv for the NICs 2) so the VMs properly respond to shutdown/reboot commands from xm I''m having trouble converting them. I believe

more /etc/xen/scalix2 kernel="/boot/vmlinuz-2.6.18-8.1.6.el5xen" memory = 512 name = "hating-xen" vif = [''ip = "10.0.1.150", bridge=xenbr0''] disk = [ ''/dev/XEN/scalixroot,sda1,w'', ''/dev/XEN/scalixvar,sda3,w'', ''/dev/XEN/scalixswap,sda2,w'' ] It

Hello, I am trying to install Win2008 x64 on xen. However it always crashes with: 0x0000005b which from my research means incompatible CPU. Can anyone assist with this? How can I get x64 to work? cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 2 model name : Quad-Core AMD Opteron(tm) Processor 2344 HE grep svm /proc/cpuinfo flags : fpu tsc msr pae mce cx8

Thanks to all. Symbolic link to vmlinuz image is a solution to my problem: $ ll /boot total 2536 drwxr-xr-x. 3 root root 60 2013-04-15 14:49 efi lrwxrwxrwx. 1 root root 25 2013-09-18 15:50 grub -> /dev/.initramfs/live/grub -rw-r--r--. 1 root root 185842 2013-03-29 20:59 symvers-2.6.32-358.6.1.el6.x86_64.gz -rw-r--r--. 1 root root 2407872 2013-03-29 20:58

Hi, I'm using SolusVM control panel to create KVM VPS. Suddenly, I can't make any VPS on Host-Node. Their build log says the SolusVM can't read the libguestfs in server. During the debug, I've tried to mount existing VPS using guestmount command and I can't mount the KVM image. Please check here. ============= [root@SG01KVM256-01 ~]# guestmount -i -a

Hi, I have a Debian 4.0 XEN dom, which is giving me some strange errors on the kernel when I try and use iptables, as such: stats:/etc/snmp# iptables -L -v Note: /etc/modules.conf is more recent than /lib/modules/2.6.18-8.1.15.el5xen/modules.dep modprobe: QM_MODULES: Function not implemented modprobe: QM_MODULES: Function not implemented modprobe: Can''t locate module ip_tables

I want to install Xen 3.3.0 from source code. but I failed in doing that in the following steps 1. download xen from http://bits.xensource.com/oss-xen/release/3.3.0/xen-3.3.0.tar.gz 2. # tar -zxf xen-3.3.0;cd xen-3.3.0 3. # make world ......succeed 4. # cp /boot/config-2.6.18-53.el5 build-linux-2.6.18-xen_x86_64/.config 5. # make linux-2.6-xen-config CONFIGMODE=menuconfig (or xconfig)

Hello all, I tried unsuccessfully to run libguestfs on debian squeeze (with kernel from testing) using the packages you provide here: http://libguestfs.org/download/binaries/debian-packages/. The output I get from libguestfs-test tool is this: ===== Test starts here ===== LIBGUESTFS_DEBUG=1 TMPDIR=(not set) libguestfs: new guestfs handle 0x17f32c0 library version: 1.14.0 guestfs_get_append:

Hello all, I 've compiled libguestfs 1.16.5 on arch linux and the tests fail. This is the output I get when I run libguestfs-test-tool: LIBGUESTFS_DEBUG=1 TMPDIR=(not set) libguestfs: new guestfs handle 0xcf4310 library version: 1.16.5 guestfs_get_append: (null) guestfs_get_attach_method: appliance guestfs_get_autosync: 1 guestfs_get_direct: 0 guestfs_get_memsize: 500 guestfs_get_network: 0