similar to: Issue with drive replacement

Just look at this. I thought all the restarting resilver bugs were fixed, but it looks like something odd is still happening at the start: Status immediately after starting resilver: # zpool status pool: rc-pool state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine

Hi experts zpool import shows some weird config of an old zpool bash-3.00# zpool import pool: data1 id: 7539031628606861598 state: FAULTED status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://www.sun.com/msg/ZFS-8000-3C config: data1 UNAVAIL insufficient replicas

somehow I have issue replacing my disk. [20:09:29] root at adas: /root > zpool status mypooladas pool: mypooladas state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using ''zpool online''. see:

I get the following errors in the smb.log file. If anyone has any ideas about this please let me know. [2001/05/01 09:51:46, 0] lib/util_sock.c:set_socket_options(154) Failed to set socket option TCP_NODELAY (Error Connection reset by peer) [2001/05/01 09:51:46, 0] lib/util_sock.c:open_socket_in(827) Get_Hostbyname: Unknown host [2001/05/01 09:51:46, 0] smbd/oplock.c:open_oplock_ipc(93)

After several days of trying to get a 1.5TB drive to resilver and it continually restarting, I eliminated all of the snapshot-taking facilities which were enabled and 2009-10-29.14:58:41 [internal pool scrub done txg:567780] complete=0 2009-10-29.14:58:41 [internal pool scrub txg:567780] func=1 mintxg=3 maxtxg=567354 2009-10-29.16:52:53 [internal pool scrub done txg:567999] complete=0

I''ve got a Thumper running snv_57 and a large ZFS pool. I recently noticed a drive throwing some read errors, so I did the right thing and zfs replaced it with a spare. Everything went well, but the resilvering process seems to be taking an eternity: # zpool status pool: bigpool state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was

Hello zfs-discuss, One of a disk started to behave strangely. Apr 11 16:07:42 thumper-9.srv sata: [ID 801593 kern.notice] NOTICE: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1: Apr 11 16:07:42 thumper-9.srv port 6: device reset Apr 11 16:07:42 thumper-9.srv scsi: [ID 107833 kern.warning] WARNING: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1/disk at 6,0 (sd27): Apr 11 16:07:42 thumper-9.srv

Hello everyone, As one of the steps of improving my ZFS home fileserver (snv_134) I wanted to replace a 1TB disk with a newer one of the same vendor/model/size because this new one has 64MB cache vs. 16MB in the previous one. The removed disk will be use for backups, so I thought it''s better off to have a 64MB cache disk in the on-line pool than in the backup set sitting off-line all

Hi all! I''ve decided to take the "big jump" and build a ZFS home filer (although it might also do "other work" like caching DNS, mail, usenet, bittorent and so forth). YAY! I wonder if anyone can shed some light on how long a pool scrub would take on a fairly decent rig. These are the specs as-ordered: Asus P5Q-EM mainboard Core2 Quad 2.83 GHZ 8GB DDR2/80 OS: 2 x

So, my Areca controller has been complaining via email of read errors for a couple days on SATA channel 8. The disk finally gave up last night at 17:40. I got to say I really appreciate the Areca controller taking such good care of me. For some reason, I wasn''t able to log into the server last night or in the morning, probably because my home dir was on the zpool with the failed disk

Hi all I have installed a new server with 77 2TB drives in 11 7-drive RAIDz2 VDEVs, all on WD Black drives. Now, it seems two of these drives were bad, one of them had a bunch of errors, the other was very slow. After zfs offlining these and then zfs replacing them with online spares, resilver ended and I thought it''d be ok. Appearently not. Albeit the resilver succeeds, the pool status

In a discussion a few weeks back, it was mentioned that the Best Practices Guide says something like "Don''t put more than ___ disks into a single vdev." At first, I challenged this idea, because I see no reason why a 21-disk raidz3 would be bad. It seems like a good thing. I was operating on assumption that resilver time was limited by sustainable throughput of disks, which

I know this topic has been discussed many times... but what the hell makes zpool resilvering so slow? I''m running OpenSolaris 2009.06. I have had a large number of problematic disks due to a bad production batch, leading me to resilver quite a few times, progressively replacing each disk as it dies (and now preemptively removing disks.) My complaint is that resilvering ends up

Hi, I have Dell md1200 connected to two heads ( Dell R710 ). The heads have Perc H800 card and drives are configured in Raid0 ( Virtual Disk) in the RAID controller. One of the drives had crashed and is replaced by a spare. Resilvering was triggered but fails to complete due to drives going offline. I have to reboot the head ( R710) and drives comes online. This happened repeatedly when

Hi. I installed solaris express developer edition (b79) on a supermicro quad-core harpertown E5405 with 8 GB ram and two internal sata-drives. I installed solaris onto one of the internal drives. I added an areca arc-1680 sas-controller and configured it in jbod-mode. I attached an external sas-cabinet with 16 sas-drives 1 TB (931 binary GB). I created a raidz2-pool with ten disks and one spare.

Hello All I read this thread Resilver/scrub times? for a few minutes and I have recognize that I dont know the different between Resilvering and Scrubing. Shame on me. :-( I dont find some declarations in the man-pages and I know the command to start scrubing "zpool scrub tank" but what is the command to start resilver and what is the different? -- Best Regards Alexander Dezember, 20

Dear all Is there a way to stop a running scrub on a zfs pool? Same question applies to a running resilver. Both render our fileserver unusable due to massive CPU load so we''d like to postpone them. In the docs it says that resilvering and scrubbing survive a reboot, so I am not even sure if a reboot would stop scrubbing or resilvering. Any help greatly appreciated! Cheers, Thomas

This must be resliver day :) I just had a drive failure. The hot spare kicked in, and access to the pool over NFS was effectively zero for about 45 minutes. Currently the pool is still reslivering, but for some reason I can access the file system now. Resliver speed has been beaten to death I know, but is there a way to avoid this? For example, is more enterprisy hardware less susceptible to

I currently have a 7x1.5tb raidz1. I want to add "phase 2" which is another 7x1.5tb raidz1 Can I add the second phase to the first phase and basically have two raid5''s striped (in raid terms?) Yes, I probably should upgrade the zpool format too. Currently running snv_104. Also should upgrade to 110. If that is possible, would anyone happen to have the simple command lines to

Hi, once I created a zpool of single vdevs not using mirroring of any kind. Now I wonder if it''s possible to add vdevs and mirror the currently existing ones. Thanks, budy -- This message posted from opensolaris.org