similar to: cifs perfomance

i''ve got a little zpool with a naughty raidz vdev that won''t take a replacement that as far as i can tell should be adequate. a history: this could well be some bizarro edge case, as the pool doesn''t have the cleanest lineage. initial creation happened on NexentaCP inside vmware in linux. i had given the virtual machine raw device access to 4 500gb drives and 1 ~200gb

I made a bad judgment and now my raidz pool is corrupted. I have a raidz pool running on Opensolaris b85. I wanted to try out freenas 0.7 and tried to add my pool to freenas. After adding the zfs disk, vdev and pool. I decided to back out and went back to opensolaris. Now my raidz pool will not mount and got the following errors. Hope someone expert can help me recover from this error.

I''m not sure exactly what happened with my box here, but something caused a hiccup on multiple sata disks... May 9 16:40:33 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci10de,5c at 9/pci-ide at a/ide at 0 (ata6): May 9 16:47:43 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci-ide at 7/ide at 1 (ata3): May 9 16:47:43 sol timeout: abort request, target=0

Hi! I tried to add an other FiweFire Drive to my existing four devices but it turned out, that the OpenSolaris IEEE1394 support doen''t seem to be well-engineered. After not recognizing the new device and exporting and importing the existing zpool, I get this zpool status: pool: tank state: DEGRADED status: One or more devices could not be used because the label is missing or

Hi, I hope there''s someone here who can possibly provide some assistance. I''ve had this read problem now for the past 2 months and just can''t get to the bottom of it. I have a home snv_111b server, with a zfs raid pool (4 x Samsung 750GB SATA drives). The motherboard is a ASUS M2N68-CM (4 SATA ports) with an Athlon LE1620 single core CPU and 4GB of RAM. I am using it

Hiya, Is there any reason (and anything to worry about) if disk target IDs don''t start at 0 (zero). For some reason mine are like this (3 controllers - 1 onboard and 2 PCIe); AVAILABLE DISK SELECTIONS: 0. c8t0d0 <ATA -ST9160314AS -SDM1 cyl 19454 alt 2 hd 255 sec 63> /pci at 0,0/pci10de,cb84 at 5/disk at 0,0 1. c8t1d0 <ATA -ST9160314AS -SDM1

Hey all, I''m not sure if this is a ZFS bug or a hardware issue I''m having - any pointers would be great! Following contents include: - high-level info about my system - my first thought to debugging this - stack trace - format output - zpool status output - dmesg output High-Level Info About My System --------------------------------------------- - fresh

Hi, all, I think I''m missing a concept with import and export. I''m working on installing a Nexenta b134 system under Xen, and I have to run the installer under hvm mode, then I''m trying to get it back up under pv mode. In that process the controller names change, and that''s where I''m getting tripped up. I do a successful install, then I boot OK,

I''ve installed Open Solaris 2009.06 on a machine with 5 identical 1TB wd green drives to create a ZFS nas. The intended install is one drive dedicated to the OS and the remaining 4 drives in a raidz1 configuration. The install is working fine, but creating the raidz1 pool and rebooting is causing the machine report "Cannot find active partition" upon reboot. Below is command

Hi, I just said zfs destroy pool/fs, but meant to say zfs destroy pool/junk. Is ''fs'' really gone? thx jake

I have configured a test system with a mirrored rpool and one hot spare. I powered the systems off, pulled one of the disks from rpool to simulate a hardware failure. The hot spare is not activating automatically. Is there something more i should have done to make this work ? pool: rpool state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for

Dear Everybody, I am telling you the whole story, perhaps you can give me a better idea. Almost 3 years ago I purchased Arima HDAMA rev. G motherboard with integrated Silicon Image Sil3114 Serial ATA 4 Ports SATA I adapter. ( http://www.arimacorp.com/ViewProduct.asp?View=86 ) . BIOS version is 2.13. My intention is to make a file server, using linux software raid, so I bought 2 new shiny 1TB

Hi, Yesterday I got all my disks in two zpool disconected. They are not real disks - LUNS from StorageTek 2530 array. What could that be - a failing LSI card or a mpt driver in 2009.06? After reboot got four disks in FAILED state - zpool clear fixed things with resilvering. Here is how it started (/var/adm/messages) Feb 23 12:39:03 nexus scsi: [ID 365881 kern.info] /pci at 0,0/pci10de,5d at

I''ve been trying to get either smartctl or sg3_utils to report properly. They both have the same low-level problems which leads me to suspect either I''m doing something wrong OR there is a problem in the marvell88sx / sd / SATA etc framework. I can access drive name/serial number of all drives on the SAT2 card and the temperature is returned from the IE log page on my two

Hi all, Please can you help with my ZFS troubles: I currently have 3 x 400 GB Seagate NL35''s and a 500 GB Samsung Spinpoint in a RAIDZ array that I wish to expand by systematically replacing each drive with a 750 GB Western Digital Caviar. After failing miserably, I''d like to start from scratch again if possible. When I last tried, the replace command hung for an age, network

I''m curious about if there are any potential problems with using LVM metadevices as ZFS zpool targets. I have a couple of situations where using a device directly by ZFS causes errors on the console about "Bus and lots of "stalled" I/O. But as soon as I wrap that device inside an LVM metadevice and then use it in the ZFS zpool things work perfectly fine and smoothly (no

Can zfs send utilize multiple-streams of data transmission (or some sort of multipleness)? Interesting read for background http://people.planetpostgresql.org/xzilla/index.php?/archives/338-guid.html Note: zfs send takes 3 days for 1TB to another system Regards, Jignesh

Author: lclee Repository: /hg/zfs-crypto/gate Revision: c80632cae25a4c92285f9e6434b64aa3f3aa6b79 Log message: 4855218 sparc: Need EFI label support on IDE 6275431 x86: Need EFI label support on IDE 6340778 cmlb: common disk label code 6326547 format: converting EFI to VTOC, fdisk info is taken from a random disk 6335611 format: Need to warn users that data will be lost when converting to and from

Is there a trick to listing available providers? I can''t find it.

Perhaps a bit off-topic (I asked on the rescue list -- http://web.archiveorange.com/archive/v/OaDWVGdLhxWVWIEabz4F -- and was told to try here), but I am kinda shooting in the dark: I have been finding online scattered and vague info stating that this card can be made to work with a sparc solaris 10 box (http://old.nabble.com/eSATA-or-firewire-in-Solaris-Sparc-system-td27150246.html is the