similar to: mirror rpool

I''ve installed Open Solaris 2009.06 on a machine with 5 identical 1TB wd green drives to create a ZFS nas. The intended install is one drive dedicated to the OS and the remaining 4 drives in a raidz1 configuration. The install is working fine, but creating the raidz1 pool and rebooting is causing the machine report "Cannot find active partition" upon reboot. Below is command

I made a bad judgment and now my raidz pool is corrupted. I have a raidz pool running on Opensolaris b85. I wanted to try out freenas 0.7 and tried to add my pool to freenas. After adding the zfs disk, vdev and pool. I decided to back out and went back to opensolaris. Now my raidz pool will not mount and got the following errors. Hope someone expert can help me recover from this error.

Hi all, Please can you help with my ZFS troubles: I currently have 3 x 400 GB Seagate NL35''s and a 500 GB Samsung Spinpoint in a RAIDZ array that I wish to expand by systematically replacing each drive with a 750 GB Western Digital Caviar. After failing miserably, I''d like to start from scratch again if possible. When I last tried, the replace command hung for an age, network

Dear ZFS experts, I have 2 SATA 500 GB Hard Drive on my Dual Core PC I have installed OpenSolaris 2008.11 using Live CD I got from Sun Tech Days in Singapore Now, using all the guidelines I got here at Indiana Discussion, I can''t attach my second drive to rpool to make them mirror Initially I was playing around with similar configuration in VirtualBox, and it does not succeed. Finally

I''ve got knee deep into learning how to use Opensolaris and zfs, and I see now that my goal of home zfs server may have been better served if I had partitioned the install disk leaving some of the 60GB to be added to a zpool. First, how much space does a working OS need. I don''t mean bare minimum but to be comfortable and have some growing room (on the install disk)?

(i use the term loosely because i know that zfs likes whole volumes better) when installing ubuntu, i got in the habit of using a separate partition for my home directory so that my data and gnome settings would all remain intact when i reinstalled or upgraded. i''m running osol 2008.11 on an ultra 20, which has only two drives. i''ve got all my data located in my home directory,

i''ve got a little zpool with a naughty raidz vdev that won''t take a replacement that as far as i can tell should be adequate. a history: this could well be some bizarro edge case, as the pool doesn''t have the cleanest lineage. initial creation happened on NexentaCP inside vmware in linux. i had given the virtual machine raw device access to 4 500gb drives and 1 ~200gb

I''m not sure exactly what happened with my box here, but something caused a hiccup on multiple sata disks... May 9 16:40:33 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci10de,5c at 9/pci-ide at a/ide at 0 (ata6): May 9 16:47:43 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci-ide at 7/ide at 1 (ata3): May 9 16:47:43 sol timeout: abort request, target=0

Is it possible to convert Solaris 10 DomU from hvm to pv?? Dom0 is Opensolaris b132. Possibly any Documentation about this? Here is config of Solaris DomU: <domain type=''xen'' id=''1''> <name>Solaris-10</name> <uuid>c505f6c3-b37b-8268-fe46-f10b3277238b</uuid> <memory>2097152</memory>

Hello all, It was often asked and discussed on the list about "how to change rpool HDDs from AHCI to IDE mode" and back, with the modern routine involving reconfiguration of the BIOS, bootup from separate live media, simple import and export of the rpool, and bootup from the rpool. The documented way is to reinstall the OS upon HW changes. Both are inconvenient to say the least.

Hi, all, I think I''m missing a concept with import and export. I''m working on installing a Nexenta b134 system under Xen, and I have to run the installer under hvm mode, then I''m trying to get it back up under pv mode. In that process the controller names change, and that''s where I''m getting tripped up. I do a successful install, then I boot OK,

Hi, Your attempt didn't work because you didn't do what I suggested, which was make sure that your data frame matched the example given in the help for gantt.chart. Here's what you have: > str(cdfg) 'data.frame': 3 obs. of 3 variables: $ c1d1: Factor w/ 3 levels "task 1","task 3",..: 1 3 2 $ c2d1: POSIXct, format: "2018-04-01"

Hello! I''am setup zfs / cifs home storage server, end now have low performance with play movie stored on this zfs from windows client. server hardware is not new , but n windows it perfomance was normal. CPU is AMD Athlon Burton Thunderbird 2500, runing on 1,7GHz, 1024 RAM and storage: usb c4t0d0 ST332062-0A-3.AA-298.09GB /pci at 0,0/pci1458,5004 at 2,2/cdrom at 1/disk at

Hi Sarah Thank you very much for your pointers. Is there a way to specify the date string as POSIXct when reading in? I have tried the following (very inelegant way) and still have no luck. --- Begin Code --- # 1st read in the spreadsheet with stringsAsFactors set to FALSE > abc <- read.csv("gntr1.csv", header=TRUE, stringsAsFactors=FALSE) > abc code tasks.labels

One of my disks in the zfs raidz2 pool developed some mechanical faliure and had to be replaced. It is possible that I may have swaped the sata cables during the exchange, but this has never been a problem before in my previous tests. What concerns me is the output from zpool status for the c2d0 disk. The exchanged disk is now c3d0 but is no longer a part of the pool?! This is build_75 on x86

I''ve been trying to get either smartctl or sg3_utils to report properly. They both have the same low-level problems which leads me to suspect either I''m doing something wrong OR there is a problem in the marvell88sx / sd / SATA etc framework. I can access drive name/serial number of all drives on the SAT2 card and the temperature is returned from the IE log page on my two

Hello, I''m thinking about a setup that looks like this: - 2 headnodes with FC connectivity (OpenSolaris) - 2 backend FC srtorages (Disk Shelves with RAID Controllers presenting a huge 15 TB RAID5) - 2 datacenters (distance 1 km with dark fibre) - one headnode and one storage in each data center (Sorry for this ascii art :) ( Data Center 1) <--1km--> (Data

Author: lclee Repository: /hg/zfs-crypto/gate Revision: c80632cae25a4c92285f9e6434b64aa3f3aa6b79 Log message: 4855218 sparc: Need EFI label support on IDE 6275431 x86: Need EFI label support on IDE 6340778 cmlb: common disk label code 6326547 format: converting EFI to VTOC, fdisk info is taken from a random disk 6335611 format: Need to warn users that data will be lost when converting to and from

I had the rpool with two sata disks in the miror. Solaris 10 5.10 Generic_141415-08 i86pc i386 i86pc Unfortunately the first disk with grub loader has failed with unrecoverable block write/read errors. Now I have the problem to import rpool after the first disk has failed. So I decided to do: "zpool import -f rpool" only with second disk, but it''s hangs and the system is

Andy, OSOL 2009.06 been installed in stub domain (hvm domain) at mentioned Dom0 with 2.6.30 xenified kernel via xen-patches-2.6.30-2.tar.bz2 refuse to activate PV drivers. When same Dom0 starts with 2.6.29.4 xenified kernel (xen-patches-2.6.29-6.tar.bz2) kernel OSOL 2009.06 in stub (hvm) domain does activate PV drivers for xdf, xnf . Boris