similar to: Data corruption during resilver operation

How can I diagnose why a resilver appears to be hanging at a certain percentage, seemingly doing nothing for quite a while, even though the HDD LED is lit up permanently (no apparent head seeking)? The drives in the pool are WD Raid Editions, thus have TLER and should time out on errors in just seconds. ZFS nor the syslog however were reporting any IO errors, so it weren''t the disks.

Hi list, Here''s my case : pool: mypool state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scrub: resilver in progress for 147h19m, 100.00% done, 0h0m to go config: NAME STATE READ WRITE CKSUM filerbackup13

I am curious why zpool status reports a pool to be in the DEGRADED state after a drive in a raidz2 vdev has been successfully replaced. In this particular case drive c0t6d0 was failing so I ran, zpool offline home/c0t6d0 zpool replace home c0t6d0 c8t1d0 and after the resilvering finished the pool reports a degraded state. Hopefully this is incorrect. At this point is the vdev in question now has

Just look at this. I thought all the restarting resilver bugs were fixed, but it looks like something odd is still happening at the start: Status immediately after starting resilver: # zpool status pool: rc-pool state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine

Hi all I''m seeing some rather bad resilver times for a pool of WD Green drives (I know, bad drives, but leave that). Does resilver go through the whole pool or just the VDEV in question? -- Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres

Hi all, I recently experienced a disk failure on my home server and observed checksum errors while resilvering the pool and on the first scrub after the resilver had completed. Now everything seems fine but I''m posting this to get help with calming my nerves and detect any possible future faults. Lets start with some specs. OSOL 2009.06 Intel SASUC8i (w LSI 1.30IT FW) Gigabyte

I have seen conflicting examples on how to create zpools using full disks. The zpool(1M) page uses "c0t0d0" but OpenSolaris Bible and others show "c0t0d0p0". E.g.: zpool create tank raidz c0t0d0 c0t1d0 c0t2d0 c0t3d0 c0t4d0 c0t5d0 zpool create tank raidz c0t0d0p0 c0t1d0p0 c0t2d0p0 c0t3d0p0 c0t4d0p0 c0t5d0p0 I have not been able to find any discussion on whether (or when) to

We have a Mirror setup in ZFS that''s 73GB (two internal disks on a sun fire v440). We currently are going to attach this system to an Equallogic Box, and will attach an ISCSCI LUN from the Equallogic box to the v440 of about 200gb. The Equallogic Box is configured as a Hardware Raid 50 (two hot spares for redundancy). My question is what''s the best approach to moving the ZFS

Setup: Osol.11 build 109 Athlon64 3400+ Aopen AK-86L mobo adeptec 1250sa Sata PCI controller card [re-posted from accidental post to osol `general'' group] I''m having trouble with an adaptec 1205sa (non-raid) SATA PCI card. It was all working fine when I plugged 2 used sata 200gb disks of a windows xp machine into it. Booted my osol server and added a zpool mirror using those

Hi all! I''ve decided to take the "big jump" and build a ZFS home filer (although it might also do "other work" like caching DNS, mail, usenet, bittorent and so forth). YAY! I wonder if anyone can shed some light on how long a pool scrub would take on a fairly decent rig. These are the specs as-ordered: Asus P5Q-EM mainboard Core2 Quad 2.83 GHZ 8GB DDR2/80 OS: 2 x

hello I make a subroutine that give-me a (mathematical) function in string format. I would like transform this string into function ( R function ). thanks for any tips. cleber #e.g. fun_String = "-100*x1 + 0*x2 + 100*x3" fun <- function(x1,x2,x3){ return( ############ evaluation( fun_String ) ############ ) True String mathematical function :-( :-( > nomes [1]

I know this topic has been discussed many times... but what the hell makes zpool resilvering so slow? I''m running OpenSolaris 2009.06. I have had a large number of problematic disks due to a bad production batch, leading me to resilver quite a few times, progressively replacing each disk as it dies (and now preemptively removing disks.) My complaint is that resilvering ends up

Hello, I''m working with someone who replaced a failed 1TB drive (50% utilized), on an X4540 running OS build 134, and I think something must be wrong. Last Tuesday afternoon, zpool status reported: scrub: resilver in progress for 306h0m, 63.87% done, 173h7m to go and a week being 168 hours, that put completion at sometime tomorrow night. However, he just reported zpool status shows:

Hi, R users, I'm trying to transform a matrix A into B (see below). Anyone knows how to do it in R? Thanks. Matrix A (zone to zone travel time) zone z1 z2 z3 z1 0 2.9 4.3 z2 2.9 0 2.5 z3 4.3 2.5 0 B: from to time z1 z1 0 z1 z2 2.9 z1 z3 4.3 z2 z1 2.9 z2 z2 0 z2 z3 2.5 z3 z1 4.3 z3 z2 2.5 z3 z3 0 The real matrix I have is much larger, with more than 2000 zones. But I think it should

I _think_ there is a problem with the license as well: Z3 is MIT, so clang would have to be released with Z3's license. On Tue, 12 Feb 2019, 09:24 Roman Lebedev via cfe-dev <cfe-dev at lists.llvm.org wrote: > On Tue, Feb 12, 2019 at 4:13 PM Paulo Matos via cfe-dev > <cfe-dev at lists.llvm.org> wrote: > > > > Hello, > > > > I am trying to run scan-build

hi, i have raid1 on zfs with 2 device on pool first device died and boot from second not working... i try to get http://mfsbsd.vx.sk/ flash and load from it with zpool import http://puu.sh/2402E when i load zfs.ko and opensolaris.ko i see this message: Solaris: WARNING: Can''t open objset for zroot/var/crash Solaris: WARNING: Can''t open objset for zroot/var/crash zpool status:

Hi, I hope there''s someone here who can possibly provide some assistance. I''ve had this read problem now for the past 2 months and just can''t get to the bottom of it. I have a home snv_111b server, with a zfs raid pool (4 x Samsung 750GB SATA drives). The motherboard is a ASUS M2N68-CM (4 SATA ports) with an Athlon LE1620 single core CPU and 4GB of RAM. I am using it

I''ve got a Thumper running snv_57 and a large ZFS pool. I recently noticed a drive throwing some read errors, so I did the right thing and zfs replaced it with a spare. Everything went well, but the resilvering process seems to be taking an eternity: # zpool status pool: bigpool state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was

On Tue, 12 Feb 2019, 14:32 Paulo Matos <pmatos at linki.tools wrote: > > > On 12 February 2019 18:59:21 CET, Mikhail Ramalho < > mikhail.ramalho at gmail.com> wrote: > >I _think_ there is a problem with the license as well: Z3 is MIT, so > >clang > >would have to be released with Z3's license. > > I don't think that's a problem. You are not

Hello all R-users _question 1_ I need to make a statistical model and respective ANOVA table but I get distinct results for the T-test (in summary(lm.object) function) and the F-test (in anova(lm.object) ) shouldn't this two approach give me the same result, i.e to indicate the same significants terms in both tests??????? obs. The system has two restrictions: 1) sum( x_i ) = 1 2) sum(