similar to: Can this be done?

Hi, i''m new to the list so please bare with me. This isn''t an OpenSolaris related problem but i hope it''s still the right list to post to. I''m on the way to move a backup server to using zfs based storage, but i don''t want to spend too much drives to parity (the 16 drives are attached to a 3ware raid controller so i could also just use raid6 there). I

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

Hi all I have a test system with snv134 and 8x2TB drives in RAIDz2 and currently no Zil or L2ARC. I noticed the I/O speed to NFS shares on the testpool drops to something hardly usable while scrubbing the pool. How can I address this? Will adding Zil or L2ARC help? Is it possible to tune down scrub''s priority somehow? Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at

Hello, I was hoping that this would work: http://blogs.sun.com/zhangfan/entry/how_to_turn_a_mirror I have 4x(1TB) disks, one of which is filled with 800GB of data (that I cant delete/backup somewhere else) > root at FSK-Backup:~# zpool create -f ambry raidz1 c4t0d0 c5t0d0 c5t1d0 > /dev/lofi/1 > root at FSK-Backup:~# zpool list > NAME SIZE USED AVAIL CAP HEALTH ALTROOT

I''m building another 24-bay rackmount storage server, and I''m considering what drives to put in the bays. My chassis is a Supermicro SC846A, so the backplane supports SAS or SATA; my controllers are LSI3081E, again supporting SAS or SATA. Looking at drives, Seagate offers an enterprise (Constellation) 2TB 7200RPM drive in both SAS and SATA configurations; the SAS model offers

So, my Areca controller has been complaining via email of read errors for a couple days on SATA channel 8. The disk finally gave up last night at 17:40. I got to say I really appreciate the Areca controller taking such good care of me. For some reason, I wasn''t able to log into the server last night or in the morning, probably because my home dir was on the zpool with the failed disk

While thinking about ZFS as the next generation filesystem without limits I am wondering if the real world is ready for this kind of incredible technology ... I''m actually speaking of hardware :) ZFS can handle a lot of devices. Once in the import bug (http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6761786) is fixed it should be able to handle a lot of disks. I want to

Hi all, I would like to knwon if with ZFS it''s possible to do something like that : http://tldp.org/HOWTO/LVM-HOWTO/removeadisk.html meaning : I have a zpool with 48 disks with 4 raidz2 (12 disk). Inside those 48 disk I''ve 36x 3T and 12 x 2T. Can I buy new 12x4 To disk put in the server, add in the zpool, ask zpool to migrate all data on those 12 old disk on the new and

Hello, We have a new Thor here with 24TB of disk in (first of many, hopefully). We are trying to determine the bext practices with respect to file system management and sizing. Previously, we have tried to keep each file system to a max size of 500GB to make sure we could fit it all on a single tape, and to minimise restore times and impact should we experience some kind of volume

I want to import my zpool''s from FreeBSD 8.0 in OpenSolaris 2009.06. After reading the few posts (links below) I was able to find on the subject, it seems like it there is a differences between FreeBSD and Solaris. FreeBSD operates on directly on the disk and Solaris creates a partion and uses that... is that right? Is it impossible for OpenSolaris to use zpool''s from FreeBSD?

I have been searching this forum and just about every ZFS document i can find trying to find the answer to my questions. But i believe the answer i am looking for is not going to be documented and is probably best learned from experience. This is my first time playing around with open solaris and ZFS. I am in the midst of replacing my home based filed server. This server hosts all of my media

Hi. I installed solaris express developer edition (b79) on a supermicro quad-core harpertown E5405 with 8 GB ram and two internal sata-drives. I installed solaris onto one of the internal drives. I added an areca arc-1680 sas-controller and configured it in jbod-mode. I attached an external sas-cabinet with 16 sas-drives 1 TB (931 binary GB). I created a raidz2-pool with ten disks and one spare.

Hi, I''m running Opensolaris 2009.06, and I''m facing a serious performance loss with ZFS ! It''s a raidz1 pool, made of 4 x 1TB SATA disks : zfs_raid ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c7t2d0 ONLINE 0 0 0 c7t3d0 ONLINE 0 0 0 c7t4d0 ONLINE 0 0

In a discussion a few weeks back, it was mentioned that the Best Practices Guide says something like "Don''t put more than ___ disks into a single vdev." At first, I challenged this idea, because I see no reason why a 21-disk raidz3 would be bad. It seems like a good thing. I was operating on assumption that resilver time was limited by sustainable throughput of disks, which

Hi, I hope there''s someone here who can possibly provide some assistance. I''ve had this read problem now for the past 2 months and just can''t get to the bottom of it. I have a home snv_111b server, with a zfs raid pool (4 x Samsung 750GB SATA drives). The motherboard is a ASUS M2N68-CM (4 SATA ports) with an Athlon LE1620 single core CPU and 4GB of RAM. I am using it

The default blocksize is 128K. If you are using mirrors, then each block on disk will be 128K whenever possible. But if you''re using raidzN with a capacity of M disks (M disks useful capacity + N disks redundancy) then the block size on each individual disk will be 128K / M. Right? This is one of the reasons the raidzN resilver code is inefficient. Since you end up waiting for the

Replacing my current media server with another larger capacity media server. Also switching over to solaris/zfs. Anyhow we have 24 drive capacity. These are for large sequential access (large media files) used by no more than 3 or 5 users at a time. I''m inquiring as to what the best configuration for this is for vdevs. I''m considering the following configurations 4 x x6

Hi all, I have a home server based on SNV_127 with 8 disks; 2 x 500GB mirrored root pool 6 x 1TB raidz2 data pool This server performs a few functions; NFS : for several ''lab'' ESX virtual machines NFS : mythtv storage (videos, music, recordings etc) Samba : for home directories for all networked PCs I backup the important data to external USB hdd each day. I previously had

Hi I have google to fine som info abut ZFS and I found that site hire. I have unraid now and are realy happy whit it. but to January I are going to upgrade my cpu to a 45watt quad core from intel that I are begun to use my server to encode my tv show iso when it on. so now I are begun to learn ZFS in vitualbox. but now to the question it I make a poll whit 4 2TB ind raidz1 can it so be convetet

So, I took four 1.5TB drives and made RAIDZ, RAIDZ1 and RAIDZ2 pools. The sizes for the pools were 5.3TB, 4.0TB, and 2.67TB respectively. The man page for RAIDZ states that "The raidz vdev type is an alias for raidz1." So why was there a difference between the sizes for RAIDZ and RAIDZ1? Shouldn''t the size be the same for "zpool create raidz ..." and "zpool