similar to: Any news on ZFS bug 6535172?

Hi gurus, I like zpool iostat and I like system monitoring, so I setup a script within sma to let me get the zpool iostat figures through snmp. The problem is that as zpool iostat is only run once for each snmp query, it always reports a static set of figures, like so: root at exodus:snmp # zpool iostat -v capacity operations bandwidth pool used avail read

Recently, I''m benchmarking all kinds of stuff on my systems. And one question I can''t intelligently answer is what blocksize I should use in these tests. I assume there is something which monitors present disk activity, that I could run on my production servers, to give me some statistics of the block sizes that the users are actually performing on the production server.

So I have this dual 16-core Opteron Dell R715 with 128G of RAM attached to a SuperMicro disk enclosure with 45 2TB Toshiba SAS drives (via two LSI 9200 controllers and MPxIO) running OpenIndiana 151a4 and I''m occasionally seeing a storm of xcalls on one of the 32 VCPUs (>100000 xcalls a second). The machine is pretty much idle, only receiving a bunch of multicast video streams and

Now that Solaris 10 11/06 is available, I wanted to post the complete list of ZFS features and bug fixes that were included in that release. I''m also including the necessary patches for anyone wanting to get all the ZFS features and fixes via patches (NOTE: later patch revision may already be available): Solaris 10 Update 3 (11/06) Patches sparc Patches * 118833-36 SunOS 5.10:

Will the ability to import a destroyed ZFS pool and the fsstat command that''s part of the latest Solaris Express release (B38) make it into Solaris 10 Update-2 when it''s released in June/July??? Also has any decision been made yet what build Update-2 will be taken from to give an idea of what can be expected for ZFS??? This message posted from opensolaris.org

Hi, I just wanted to relate the solution to a problem I was having to hopefully save someone else a day of frustration. I'm using rsync-2.5.5 on AIX 4.3, compiled with gcc 2.95.3. The file I was sync'ing was very large (>2GB). Despite being configured with --enable-largefiles (which #defines _LARGE_FILES properly for AIX), and despite the fact that the initial transfer of said file

I''ve been playing with the fsstat provider lately. I''m curious why its gone undocumented and largely ignored (per google). I admit that I did experience some oddities with the data, so I''d also like to rule out whether or not it has problems which might have caused it to be left in quietly. benr.

after install libguestfs_xfs, all results are: [using guestfish] guestfish -N fs:xfs -m /dev/sda1 statvfs / bsize: 4096 frsize: 4096 blocks: 24713 bfree: 23391 bavail: 23391 files: 51136 ffree: 51133 favail: 51133 fsid: 2049 flag: 4096 namemax: 255 [using virt-rescure] virt-rescue -a test1.img ><rescue> mount /dev/sda1 /sysroot ><rescue> stat -f /sysroot File:

Thanks for your reply. I searched for the error on Google before resorting to the R forum (help group). I tried Sys.env(...) too, but didn't resolve the error I get. Hence I am looking for solution. -- -----Original Message----- From: Thierry Onkelinx [mailto:thierry.onkelinx at inbo.be] Sent: Thursday, February 01, 2018 10:57 AM To: Sariya, Sanjeev <ss5505 at cumc.columbia.edu>

Hi, I was trying to download the Crossbow ISO from : http://opensolaris.org/os/project/crossbow/snapshots/ under "Crossbow Beta iso images June 6 2008" and it failed. Does anyone know of a link which is working ? Thanks for any pointers ! Regards, Sanjeev.

Hi, I''m a bit confused with the priority of different classes with HTB. How it will be? Will the class with lowest no: have maximum priority? Any help is most appreciated, Thanks in advance, Sanjeev -- ______________________________________________ Check out the latest SMS services @ http://www.linuxmail.org This allows you to send and receive SMS through your mailbox. Powered by

I was trying to simply test bandwidth that Solaris/ZFS (Nevada b63) can deliver from a drive, and doing this: dd if=(raw disk) of=/dev/null gives me around 80MB/s, while dd if=(file on ZFS) of=/dev/null gives me only 35MB/s!?. I am getting basically the same result whether it is single zfs drive, mirror or a stripe (I am testing with two Seagate 7200.10 320G drives hanging off the same interface

This may not be a ZFS issue, so please bear with me! I have 4 internal drives that I have striped/mirrored with ZFS and have an application server which is reading/writing to hundreds of thousands of files on it, thousands of files @ a time. If 1 client uses the app server, the transaction (reading/writing to ~80 files) takes about 200 ms. If I have about 80 clients attempting it @ once, it can

Thanks for pointing to FAQ: I tried with cairo (shared in commands), unfortunately didn't work. -- Sanjeev Sariya -----Original Message----- From: Jeff Newmiller [mailto:jdnewmil at dcn.davis.ca.us] Sent: Thursday, February 01, 2018 10:12 AM To: r-help at r-project.org; Sariya, Sanjeev <ss5505 at cumc.columbia.edu>; r-help at r-project.org Subject: Re: [R] Error while working with

Hi , I''m trying to call the tc_qdisc_modify function of tc in iproute2/tc. I could compile it with my stub program and got the executable. However, when i try to create an htb qdisc i get the following error : Unknown qdisc "htb", hence option "default" is unparsable However, if i use the tc tool, it works fine.. When I tried to understand the problem, it appeared to

This is not an R issue so this is not a good venue... it has to do with which support software you have (not) installed. Try the R-sig-debian mailing list. Please clarify to them how you installed R... for Debian there are relevant deb packages and a corresponding Debian repository that provide the simplest route to a working system, but if you compile it yourself it is easy to miss dependencies.

Hello, I use Brendan''s sysperfstat script to see the overall system performance and found the the disk utilization is over 100: 15:51:38 14.52 15.01 200.00 24.42 0.00 0.00 83.53 0.00 15:51:42 11.37 15.01 200.00 25.48 0.00 0.00 88.43 0.00 ------ Utilisation ------ ------ Saturation ------ Time %CPU %Mem %Disk %Net CPU Mem

I figure this group will know better than any other I have contact with, is 700-800 I/Ops reasonable for a 7200 RPM SATA drive (1 TB Sun badged Seagate ST31000N in a J4400) ? I have a resilver running and am seeing about 700-800 writes/sec. on the hot spare as it resilvers. There is no other I/O activity on this box, as this is a remote replication target for production data. I have a the

Hi, I would like to know how to specify the token rate when a tbf qdic is created using tc tool.. Will it be a default value when tbf qdisc is created? This could be a silly question.... im quite new to all these stuff.. but im really interested.. any help will be most appreciated... thanks in advance, sanjeev -- ______________________________________________ Check out the latest SMS

Dear Sanjeev, It seems that you system neither supports X11 devices nor cairo devices. See http://lmgtfy.com/?q=R+unable+to+open+connection+to+X11 for possible solutions. Best regards, ir. Thierry Onkelinx Statisticus / Statistician Vlaamse Overheid / Government of Flanders INSTITUUT VOOR NATUUR- EN BOSONDERZOEK / RESEARCH INSTITUTE FOR NATURE AND FOREST Team Biometrie & Kwaliteitszorg /