similar to: LVM support

Geert Stappers <stappers at stappers.nl> writes: > Op 2013-10-15 om 20:03 schreef Ferenc W?gner: > >> lua: import Lua 5.2.2 > > Posted as [patch01/21] > Which was too big for the mailinglist. > So some other way is needed to share that information ... Hmm, yes. The series is available at https://github.com/wferi/syslinux as well (lua52 branch, based on upstream

Thanks but I am still in the same spot : 1) I have created a partition (ext2 with GParted). 2) Now what ? I was thinking that I should install syslinux (the bootloader). All the examples say something like "syslinux --directory /boot/syslinux/ --install /dev/sdb1" but this does not make any seance, because the is no /boot on the system. I have tried it anyways, but the

Hi, I'm trying to get the above working, without success so far: UNDIS.DOS refuses to load with an invalid NDIS stack message (from memory). keeppxe has some effect: it reduces the available conventional memory by 140 kbytes or so... still, the packet driver doesn't seem to find the interface. Does anybody have a working setup I could look at? -- Thanks, Feri.

In my usb drive with EXT3 filesystem in /dev/sda1 partition, syslinux uses the first sector on /dev/sda1 but EXT3 filesystem doesn't? On Mon, Oct 21, 2013 at 4:49 PM, Ferenc Wagner <wferi at niif.hu> wrote: > Kun Huang <gareth at unitedstack.com> writes: > > > For a bootable usb drive, syslinux seems use MBR and VBR > > (and some files on the partition) >

"H. Peter Anvin" <hpa at zytor.com> writes: > On 11/10/16 04:38, Paul Emmerich via Syslinux wrote: > >> Ferenc W?gner <wferi at niif.hu>: >> >>> for reading configuration files from disk. Does it not work with HTTP/ >>> TFTP for you? Using that, load_file could be implemented in Lua as: >> >> that does work, yes. It just

Hi, This is my current patch queue. The patches are independent, AFAIK, so feel free to cherry-pick or reject them independently. The bottom one was needed for a successful build here; the top one contains all the modifications you requested on IRC, and more. Meanwhile I hit one of the four stray TABs in tftpd.c, and decided to get rid of them. Comments welcome. --- Ferenc Wagner (5):

On 01/31/2015 11:28 PM, Ferenc Wagner wrote: > I for one don't expect insults after such a start. Please share your > thoughts, constructive feedback is always useful. Even if there may be > good reasons for some things being as they are. Ok Feri, of course there is no reason for insults, but still, some groups take offense at any criticism. If I sound bitchy it is only as

Hi, The internal Gnu-EFI build gives me grief: * efi/check-gnu-efi.sh: uses realpath, which is not available on my Debian wheezy system. I now use readlink -f, but wonder if it's needed at all. * efi/build-gnu-efi.sh: uses realpath, like above, and also pushd/popd, which is not built into a standard Bourne shell invoked by #!/bin/sh. Again I wonder what's the point of it, as

Ray Andrews via Syslinux <syslinux at zytor.com> writes: > Do you guys like feedback from people who just gavesyslinux a first > try? I have a few bitches if you do ;-) Hi, I for one don't expect insults after such a start. Please share your thoughts, constructive feedback is always useful. Even if there may be good reasons for some things being as they are. -- Regards,

alex lupu <alupu01 at gmail.com> writes: > On Tue, Mar 17, 2015 at 4:16 AM, Ferenc Wagner <wferi at niif.hu> wrote: > >> alex lupu via Syslinux <syslinux at zytor.com> writes: >> >>?>? Obviously it would work IF I moved the vmlinuz >>> and initramfs ?files from /dev/sdd2 to /dev/sdd1. >>> >>> I figured that would probably be

Alexandre Blanchette <blanalex at gmail.com> writes: > On Wed, Dec 10, 2014 at 10:14 AM, Ferenc Wagner <wferi at niif.hu> wrote: > >> Alexandre Blanchette <blanalex at gmail.com> writes: >> >>> We are doing a deployment across many sites, we're doing one site at >>> a time and we're bringing a "mobile server" (a laptop,

In order to create a paravirtualized guest/DomU, should i use the same distro as the host/dom0 is? Or is it possible to install a paravirtualized Debian (as a guest / DomU) into a CentOS (host / Dom0) ? Juan Pablo On Tue, Jan 20, 2009 at 8:42 AM, Ferenc Wagner <wferi@niif.hu> wrote: > Juan Pablo Torres <juanpablotorres@gmail.com> writes: > > > Im trying to install a

Hi, I did try that, but then after the boot fails, the menu is displayed ... again... -Mike -----Original Message----- From: Ferenc Wagner [mailto:wferi at niif.hu] Sent: Sunday, February 22, 2015 3:22 PM To: Bradley, Mike Cc: syslinux at zytor.com Subject: Re: [syslinux] Menu too quick "Bradley, Mike via Syslinux" <syslinux at zytor.com> writes: > I'm trying to add a

On Fri, Feb 21, 2014 at 2:50 AM, Ferenc Wagner <wferi at niif.hu> wrote: > Alexandre Blanchette <blanalex at gmail.com> writes: > > > Is there a way to show some bits of information in the menu, like > > Syslinux version, MAC address and IP address? When the menu is loaded > > at startup, this information is quickly erased and is not easily > > readable.

Hi, Has anybody got an idea what may be wrong in this Debian bug (http://bugs.debian.org/604194)? I will try to look into this more, but have to sleep first... Thanks, Feri. -------------------- Start of forwarded message -------------------- Subject: Re: Bug#604194: This looks like another isolinux failure From: Ricardo Rafael Herrera Moreno <rirahemo at hotmail.com> To: Ferenc Wagner

Hi! The linux.c32 module doesn't boot my kernel, while pxelinux itself does: kernel vmlinuz-2.6.23 append initrd=initrd.img-2.6.23 root=/dev/mapper/root works, while kernel linux.c32 append vmlinuz-2.6.23 initrd=initrd.img-2.6.23 root=/dev/mapper/root does not: it stays sitting after loading the initrd without any output. Version 3.50-pre2 worked, current git does not work.

Hi I understand you (mostly). 0) How do i "install the MBR code as well and to activate your partition." 1) "mount /dev/sda1 /mnt" -->> successfully completed. 2) "mkdir /mnt/extlinux" -->> successfully completed. 3) "extlinux --install /mnt/extlinux" -->> does not work. Funny, but it it seems that there is no such thing as

On Sat, Jan 4, 2014 at 6:39 AM, Gene Cumm <gene.cumm at gmail.com> wrote: > On Tue, Dec 17, 2013 at 8:39 AM, Ferenc Wagner <wferi at niif.hu> wrote: > >> * make spotless still fails after working around the above: >> [...] >> make -r -C efi SRC="/home/wferi/syslinux/syslinux/efi" OBJ="/home/wferi/syslinux/syslinux/efi32/efi" \ >>

On 29.12.2015 22:51, poma wrote: > On 29.12.2015 22:20, Ady via Syslinux wrote: >> >>> On 27.12.2015 23:57, Jernej Simon?i? via Syslinux wrote: >>>> On Sunday, December 27, 2015, 23:34:11, Ady via Syslinux wrote: >>>> >>>>> How this change would affect users with older versions of kbd / >>>>> loadkeys / or in older OSes? I

http://bugzilla.mindrot.org/show_bug.cgi?id=742 Summary: sftp doesn't honor "Protocol 1" in config file Product: Portable OpenSSH Version: 3.6.1p2 Platform: All OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: sftp AssignedTo: openssh-bugs at mindrot.org