similar to: help with udev rules needed

check_hotplug fails on one of my machines running ubunto 4.10 "Warty Warhog", due to misparsing the udevinfo version string. The problem is caused by an old version of sed that does not appreciate the regexp. This patch fixes it, and also works on debian unstable and SLES9SP2. Please apply... Signed-Off-By: Muli Ben-Yehuda <mulix@mulix.org> Signed-Off-By: Orna Agmon

Overnight I was running a zfs send | zfs receive (both within the same system / zpool). The system ran out of space, a drive went off line, and the system is degraded. This is a raidz2 array running on FreeBSD 8.1-STABLE #0: Sat Sep 18 23:43:48 EDT 2010. The following logs are also available at http://www.langille.org/tmp/zfs-space.txt <- no line wrapping This is what was running: #

Hi all, im a wine newbie and im struggling to understand how to setup my ide cd writer in my config so that nero sees it. its currently emulated as a scsi drive. its device name is /dev/scd1 if anyone can help me out i'd appreciate it. thanks in advance

Dear R-helper: Suppose we have a matrix: Gene sample1 sample2 Gcnt1 12.0000 52.80000 Max 8.8000 39.10000 Tmem176b 67.9000 304.70000 Shmt2 8.6000 42.40000 Rtn4 11.5000 57.70000 Il17re 7.6000 38.80000 Bclp2 6.2000 32.10000 Mobkl3 4.4000 32.20000 Akr1b10 3.4000 30.10000

<!-- @page { size: 8.5in 11in; margin: 0.79in } P { margin-bottom: 0.08in } --> I'm having a problem mounting my new CDRW DVD in my new machine I just built. The motherboard is an Intel DP35DP, and I connected the CDRW DVD via ribbon cable into the motherboard IDE slot. Centos 5.1 is installed and functioning fine so far (other than this problem). I can't mount the

Problem has been solved: "sudo mount -t iso9660 /dev/cdrom /mnt/cdrom -o" mounted the drive after adding "mount /mnt/cdrom" to /etc/festab. ----- Original Message ---- From: Pam Astor <pamastor at yahoo.com> To: centos at centos.org Sent: Monday, March 17, 2008 1:45:16 PM Subject: [CentOS] CDRW-DVD Mount Problem, Centos 5.1, Intel board... <!-- _filtered

I have 2 video devices LML33 and PV155 $ lspci 06:00.0 Multimedia video controller: Zoran Corporation ZR36057PQC Video cutting chipset (rev 02) 07:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 07:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 07:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture

On Tue, Jan 27, 2004 at 10:54:31PM +0100, Olaf Hering wrote: > On Tue, Jan 27, Olaf Hering wrote: > > > On Tue, Jan 27, Kay Sievers wrote: > > > > > On Tue, Jan 27, 2004 at 09:06:51PM +0100, Olaf Hering wrote: > > > > udevinfo writes to fd 0, all the output is lost somehow. > > > > > > > > olaf@ibook:~> i="`/sbin/udevinfo

Is there a proper, documented way to cross compile DAHDI and Asterisk for a processor/system other than the one you're currently typing on? Now.. I have been doing this for some time, but it's been really frustrating every time I change/upgrade, etc. I've just tried to compile DAHDI for an AMD Geode system on my development system which is Intel Atom. Building the kernel is easy -

Hi e, I am normally use gnome and would do the following to make my CD / DVD mount with exec gnome-mount --write-settings --device /dev/sdc0 -o exec What is the equivalent in KDE ? My initial research suggests that I actually have to write a custom udev rule to achieve this. This has led me as far as running udevinfo -q path -n /dev/scd0 udevtest /block/sr0 (the output is below) My

Hi: I?Bought TDM2400P ,with 24 FXO ports , I installed? the asterisk 1.4.28 and?dahdi 2.2.0?and then i compiled them and configured all, i pluged into 8 pstn line into the Rj connector and then i got messages on asterisk console that alarm cleared on channels 1->8??, at this step everything should go fine ,but when i try to make a call?through the TDM?there is silence and no audio,and then i

I need direction. I don't know what to google for anymore. I am unable to get my SmartUPS 2200XL to be recognized. My suspicions are that it's UDEV or Kernel related. I've updated the kernel to the highest version I feel comfortable with due to other things that run on the server, and I've updated UDEV a bit too. When I plug in the USB cable from the UPS into the server, I

I am trying to use kickstart for automated builds from a DVD. Some of the machines have DVD's drives and some have CDRom drives only. With the CDRom only machines I would like to plug in an external DVD drive via USB and use this to kickstart. The DVD only machines work correctly with a isolinux.cfg as label test kernel vmlinuz append initrd=initrd.img ramdisk_size=8192

> -----Original Message----- > From: Ewan Mellor [mailto:ewan@xensource.com] > Sent: Tuesday, December 06, 2005 5:25 AM > To: Dave Thompson (davetho) > Cc: Xen Mailing List > Subject: Re: [Xen-devel] Hotplug scripts not working... > xen/ia64 domU stoppedworking > > On Mon, Dec 05, 2005 at 03:03:54PM -0500, Dave Thompson > (davetho) wrote: > > > >

> Hello everyone. I try to connect four PowerMust 2000 ups's via usb to one > computer using megatec_usb driver. But megatec_usb completly ignores port > directive in ups.conf, I even try port = /dev/null and megatec_usb founds > ups and it works. The 'port' is not used for USB connected devices, it's only needed for compatibility reasons. > Problem is that

Processing commands for control at bugs.debian.org: > reassign 456330 xen-3 Bug#456330: use udevadm instead of udevinfo Warning: Unknown package 'xen-3.1' Bug reassigned from package `xen-3.1' to `xen-3'. > -- Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database)

Hello, The current dependancy on hotplug|udev (>= 0.59) seems bad. As far as I remember, last week, when I tried to install Ralph packages, I got an error from hotplug/udev and I had to use udev from backports.org Anyone know which version of udev/hotplug we will have to depends on ? Maybe we could simply rely on a recent udev dependancy, because afaik udev now provides hotplug. -- Julien

I read Ben Rockwood''s blog post about Thumpers and SMART (http://cuddletech.com/blog/pivot/entry.php?id=993). Will the SUNWhd package only work on a Thumper? Can I use this on my snv_101 system with AMD 64 bit processor and nVidia SATA?

I just got a Dell Dimension e521 (AMD 64 x2, nVidia MCP51 chipset) and so far it has been fine. Today I tried to burn some CD-R and DVD-R disks and have been able to do nothing but make coasters. The drive is a TSST TS-H653a (Samsung OEM) and does have the current firmware. Playing back data, audio, and video disks work just fine, but recording is a different matter. The drive shows up as

Hello, What is the maximum number of simultaneous calls supported by asterisk. thks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090703/0794c554/attachment.htm