similar to: ASUS PT6 or Intel DX58SO for CentOS?

Hello, I'm trying to set up a sendmail server on 4.8 that supports auth-based relaying. I followed the procedures at http://puresimplicity.net/~hemi/freebsd/sendmail.html, and aside from having to run makes manually in the library directories, I had no difficulty. I did not use the rebuild world recommendation, though. Everything is up and running, but whenever I try to send mail

We're looking at SugarCRM 5, but they strongly recommend PHP 5.2.4. Looking around I see that a few individuals are maintaining repos for CentOS, but I'd prefer to get it from one of the larger repositories. Anyone out there using http://www.jasonlitka.com/yum-repository/ ? Any idea when PHP 5.2x will be available? --Chris

tmoore wrote: > > > I`ve raised a support case with ASUS to try to get them to fix the BIOS on > P6T Deluxe ... I`ll keep this thread updated. > > The IOMMU is seriously broken on this board, I have tried many workarounds > and it always results in failure. > > > Hello, did you get a reply? Somebody else has something new about the Asus P6T and this problem? How

Hello, I''m having problems with VTD on this board. The board/cpu/bios all support vt-d and I think maybe I''m just missing something? Any feedback would be much appreciated :) Output below: root@vm:~# xm create /etc/xen/vm-nine.cfg Using config file "/etc/xen/vm-nine.cfg". Error: Failed to assign device to IOMMU (0000:05:00.0@100,msitranslate=1,power_mgmt=0)

Hello, I''m having problems with VTD on this board. The board/cpu/bios all support vt-d and I think maybe I''m just missing something? Any feedback would be much appreciated :) Output below: root@vm:~# xm create /etc/xen/vm-nine.cfg Using config file "/etc/xen/vm-nine.cfg". Error: Failed to assign device to IOMMU (0000:05:00.0@100,msitranslate=1,power_mgmt=0)

reaver wrote: > > On Tue, Feb 24, 2009 at 12:36 AM, Dustin Henning > <Dustin.Henning@prd-inc.com> wrote: >> Christian, >>        I am not sure what lead me to believe you had an AMD system.  To >> summarize what I was trying to say, ASUS is claiming that this issue is >> unsupported because you use Linux, but at the end of the day, the issue >> has

I try pci pci passthrough with xen 3.3.1 and CentOS 5.2(64bit) on a SUPERMICRO C7X58 board I see the following the error in my boot log. (XEN) [VT-D]dmar.c:372: RMRR is incorrect. This problem is caused by this condition in dmr.c:372. if ( rmrr->base_address >= rmrr->end_address ) { dprintk(XENLOG_ERR VTDPREFIX, "RMRR is incorrect.\n"); return -EFAULT; } As an

I try pci pci passthrough with xen 3.3.1 and CentOS 5.2(64bit) on a SUPERMICRO C7X58 board I see the following the error in my boot log. (XEN) [VT-D]dmar.c:372: RMRR is incorrect. This problem is caused by this condition in dmr.c:372. if ( rmrr->base_address >= rmrr->end_address ) { dprintk(XENLOG_ERR VTDPREFIX, "RMRR is incorrect.\n"); return -EFAULT; } As an

Hello, I''ve previously been successful with Xen4 and VT-d on other systems. I am having trouble getting VT-d passthrough working to a WinXP domain with DX58SO (Q45) motherboard and i7 930 CPU. VT-d is enabled in bios, xm info shows hvm_directio capability, I have iommu=1 set, I have the devices bound to pciback on dom0 cmdline, xm pci-list-assignable-devices shows the devices as

Hello, I''ve previously been successful with Xen4 and VT-d on other systems. I am having trouble getting VT-d passthrough working to a WinXP domain with DX58SO (Q45) motherboard and i7 930 CPU. VT-d is enabled in bios, xm info shows hvm_directio capability, I have iommu=1 set, I have the devices bound to pciback on dom0 cmdline, xm pci-list-assignable-devices shows the devices as

Platform : Nehalem, official Intel x58 with Core i7 920 (dx58so) Main (Console): Nvidia 9500 GT PCI Express Secondary: Nvidia 8800 GTS PCI Express Yes, I binned the ASUS P6T due to bad VT-d support in the BIOS. With the latest BIOS from Intel, the dx58so has enable/disable for VT-d, ICH FLR and Interrupt Mapping! Helped a lot with getting this working ... Dom0: 2.6.18-xen0 (built from

Hi Does Sangoma 8-port card A108 support PCIe version 2.0 ? The card is here http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a108.html And we want to use 3 such cards in this motherboard because it has 3 PCIe slots of version 2.0 http://www.intel.com/products/desktop/motherboards/DX58SO/DX58SO-overview.htm Is this a good idea ? Do you have any experience

Hi, I have an ASUS P6T Deluxe and I''m trying to use VT-d with Xen. I have also tried it with ESXi and Parallels Workstation Extreme - none of them work correctly. >From reading the xen-user and xen-devel list archives, I see that this motherboard has problems with malformed DMAR tables. Is there anything I can do to fix/workaround this or am I completely stuck? I did notice

Hi, I''ve successfully used VT-d on an ASUS P6T mainboard which is known to have really buggy RMRR tables. I tested passtrough with: - the onboard (fake-)raid-controller (no problems) - a pci card (no problems) - VGA cards (worked only partly - I''ll investigate that) I wrote a little patch to the code parsing the RMRR tables and enabled the following command line options:

Trying to set up PCI pass through with xen 3.2.1 on Debian Lenny, with xen Kernel 2.6.26... having no luck. I have the following configured... i) Virtualization and vt-d are both enabled in the bios, I have power cycled after making these changes. ii) I have these option in grub menu; iommu=1 pciback.permissive pciback.hide=(07:01.0)(01:00.0) vtd=1 iii) I have this in my cfg file

I have a chipset which supports VT-d (Intel X58) and, according to my motherboard manufacturers, VT-d is enabled in the BIOS and listed as "Intel VT." The problem is that xm dmesg shows "I/O virtualisation disabled" and I get this error message when I try to create a domU with a pci device assigned: ''Error: failed to assign device: maybe the platform doesn''t

Hi All, Thought I would let those that are interested know that I had success in running 24G on an Asus P6T with 24G kit of Kingston DDR3. While I was putting this together I saw lots of forum posts asking if anyone had tried it. Well we did here at our work and all looks great including running "memtest86" overnight. I have a fluid dynamics simulation running on it with 90% memory

Hello folks, I have a CentOS 6.4 installation running Sendmail, and after some serious hair tear stare and compare I'm a bit stumped. When I connect to the server either with telnet or SSL, sendmail is not presenting the AUTH capability after an EHLO. Everything looks like it should be working, but no amount of tweaking is getting the AUTH capability advertised (and it doesn't work if

Hi, Just try to build rpm of Samba on my CentOS 5.2 box. RPM building & updating were fine, but I can not start smbd. Here are errors: # service smb start Starting SMB services: smbd: error while loading shared libraries: libtalloc.so.1: cannot open shared object file: No such file or directory [FAILED] Starting NMB services: nmbd:

Hello to you guys, yeah Im also one of the people who seem to have a corrupted BIOS. I read already stuff about the issue''s with certain vendors - and I guess in one particular area it was made clear that even you cant do a lot about it you still collect details. CPU Intel Core i7 X980 Mainboard Asus P6T WS Professional (X58/LGA1333)(bios 1207) rev. 1.01G I also have two other