similar to: Marvell Yukon 8056?

Hello, I'm trying to install CentOS 5.2 on an HP 6730s notebook. All's going well except for one little item -- the networking. Never thought I'd have trouble with an Ethernet adapter, so I didn't even check before buying this machine; it was cheap. The adapter is a Marvell Yukon 88E8042 PCI-E Fast Ethernet controller. I can't find a Linux driver for it except one that

I'm new to the lists so sorry about any faux pas I may have made. Also I apologize for the length, but I wanted to be sure I covered most of the details. I'm trying to do a PXE install on an Intel 1435VP2 server machine. The PXE install has worked on all the older machines in the cluster, so I know PXE is working. However, these new Intel server machines only support PXE booting from

Hello, Marvel Yukon Gigabit Ethernet is supported by CentOS ? -- -- Devel in Precio http://www.pas-world.com

Hello. I have the same problem as many others, PXELINUX (or rather menu.c32) does not work with Marvell Yukon 88E8055 cards. I have two machines, Fujitsu LIFEBOOK S7110 and P7230 that have the same problem; menu.c32 will not load. The version of Marvell's base code is 1.10.1.3 (20060516), Yukon PXE v5.14.1.3 (20060704), in the machines I have tested. I have tried downgrading the BIOS on the

He Everyone, We found out that till version 3.02 the Yukon nic is supported after it gives code errors, i'm working a lot with ehtherboot via drbl / clonezilla, and together with Steven Shiau we ask you guys if you can arrange that the Yukon can be supported again. Our thanx in advance. Dave & Steven

Is anyone using sk98lin Gigabit Ethernet adapters under CentOS 4.x? The version of the driver that ships with CentOS 4.x kernels was too old to support the onboard NICs on some Intel server boards that we recently got, so we installed a newer driver using DKMS. However, we're having problems finding a stable driver to use: the first version that we tried (7.09) gave a kernel panic when I ran

Hi Everyone, What kind of specific info do i have to give for support for Yukon Nic. ------ Dave Haakenhout wrote: > HPA > What do you want to know exactly hpa? Dave

Has anyone had any luck getting this to work? The kernel provide skge, sky2 and sk98lin modules all fail to load. I was able to download the latest version from the syskonnect.de site, and with some hacking/klduging of their install script managed to compile the module in there (a newer version of sk98lin, it seems) which recognised the card... but this isn't really sustainable 'cos new

Hello List, some time ago i already asked this, in the meanwhile i did not found a solution nor i have any idea why this happens. Scenario: Every now and then i get this urgent warning: 1 Time(s): Dead loop on virtual device br0, fix it urgently! Stephen Hemminger wrote (16.08.2006 20:09) this: > It looks like a bridge ended up including itself some how. Its for me unclear when this

Hello all, I'm not able to install CentOS in a motherboard with a onboard 3Com gigabit nic (3c904/Syskonnect). Although there's a device driver for the Syskonnect (sk98lin) in the linux kernel, the installation program is asking for this interface module. I tried to create a device disk, but without success. Maybe I'm missing some information about the modules detection by the

My dd (sk98lin v7.09) supports 3c940 (Marvel/Syskonnect) which the stock v6.x drivers doesn't . Successfull tested on a Asus A-7N8X Deluxe with Marvell Gigabit Lan the dd is available at http://slackpkg.ath.cx/centos/disk/sk98lin/

I am trying to connect two workstations (CentOS 3&4) directly using a straight through cat 5e cable with a crossover adapter on one of the ends. Both hosts have gigabit-capable ethernet card. According to lspci host 1 has: 03:0e.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01) and host 2 has: 05:00.0 Ethernet controller: Marvell Technology Group

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

Hello Hamish. I found your message just googling for Suse and sk98lin. Did you solve your problem? I had the same case and only way to restore was to change NIS driver speed settings from AUTO to 10Mb. And it was not related to OS as the same problem is in WXP ( I have dual boot, ASUS P4P800, integrated GB NIS ). Oleg.

Hi All, I have a marvel chipset for my wired laptop connection. It uses the kmod-sk98lin-10.93.3.3-1.el6.elrepo.x86_64.rpm driver at elrepo. I would like to use this driver to activate the wired connection to kickstart my laptop as I have pxe booting set upon my home network. Could anyone please enlighten me as to how to get the drivers/firmware from this package loaded on my laqptop so I

On Wed, Aug 5, 2015 at 11:11 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: > On 8/5/2015 1:00 PM, Chris Murphy wrote: >> >> On Wed, Aug 5, 2015 at 10:52 AM, Bowie Bailey <Bowie_Bailey at buc.com> >> wrote: >>> >>> How would I go about pointing it at the partition? >>> >>> What I am currently doing is this: >>> device

I see a really good price, and better for quantity, for 3TB drives. Now, I've been down on WD for a couple of years, since I found that they'd protected certain h/d parms from being changed (like TLER). The ones I'm looking at are the Red, which seems to be a new color (at least to me), and one technical review I've read says that they're intended for NAS, etc, and you can

I take it you are running RedHat 8 (or 9) since this is the most up-to-date kernel. Did you install the kernel-sources and kernel-util rpms as well? You'll need these in order to compile and install zaptel. -sb -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of T. Chan Sent: Friday, January 30, 2004 4:01 PM

This is my first post to this mailing list, although I have been reading it for a while. Please forgive the length of my message. Also, great work! I'm trying to get Centos-3 running on an ASUS SK8V Opteron motherboard in a way that is useful for me. I've had some success, but now I'm stuck on a problem with the SATA driver. Okay, so I got it up on the network by replacing sk98lin

Hello, This message just came across on another mailing list I am on. The little dig on Unix as being old and Windows being new got me annoyed so I wanted to reply, but with some real contacts that he asks for at the end. I figured there might be some folks who could help him out. Feel free to reply on list or to me, and I will forward on your contact info. Message follows: " Our