similar to: Trying to restart IPv6 over PPP

AHOI! I've big trouble by setting up CentOS 6.3 for my new vDSL. As I've found out, the German Telekom is using VLAN7 for her internet-(data) connections. => http://workaround.org/blog/vdsl O.K. what I've done: The NIC where's my DSL-modem is connectet is eth0. cat /etc/sysconfig/network-scripts/ifcfg-eth0 # device for vDSL-modem DEVICE=eth0 HWADDR=00:30:1B:14:08:67

I need basic PPPoE startup help. adsl-start DID bring up my PPPoE link (ppp0) to my ISP over eth0 via the DSL modem/bridge. My IPv4 CIDR block is routing and Shorewall is doing the firewalling. But shorewall has to be started after ppp0 is up and working. For now this means running shorewall restart (or start?). Shorewall 4.2 will have a way to restart shorewall without recompiling, I

I am not getting my IPv6 address and prefix delegation for my ppp interface on my new gateway. ppp is working right. It is getting authenticated and getting the its IPv4 address. Shorewall is doing the forwarding and the static routes on the internal interface for IPv4 are working. But no IPv6. Here is my ifcfg-ppp0: USERCTL=no BOOTPROTO=dialup NAME=DSLppp0 DEVICE=ppp0 TYPE=xDSL ONBOOT=no

Hi All, Let me try again, this time with fixed width ! First off the scenario. We have a local and remote site, both of which connect to the internet via a wireless network. The wireless cards themselves have both an ethernet (ixp1) and an "Atheros" (ath0) interface. The devices connect via PPPoE, and so there is also a ppp0 interface on each device. On one side we have : IXP1 IP

Hello! My goal is to setup an ingress traffic shaping on my PPPOE DSL line with ifb. My old imq stuff used iptables marks (like ''iptables -t mangle -A PREROUTING -p tcp --sport 22 -m length --length :500 -j MARK --set-mark 31'') to classify the traffic and since i am lazy, i tried to to reuse them with ifb. But no luck: iptables marks the packets well, but tc

I am building a CentOS 5 box to ship to Houston which will be a gateway system on an SBC DSL connection for a while until the client gets a T1 installed. I have read up on using adsl-setup and related software, but never done PPPoE on anything but LinkSys commodity boxes. I have examined the adsl-setup script, and I think I understand how this works, but want to be sure I understand things

I'm having problem connecting to my isp with my sangoma s518. Everything seems to run smooth and wanrouter are training to connect....but forever.. Now, to test the connection i mounted up my standard nic and my old dsl router, to establish a standard basic pppoe connection..... and I can't with centos. I follow this standard setup:

I am having a little trouble getting my head around this so any help would be appreciated. I have just signed up a new service and have been allocated the following subnet which gives me 30 usable IP addresses. 210.15.xxx.192/27 The connection is made via pppoe which works fine and the connection creates ppp0 and assigns 210.15.xxx.193. Now I want to use 4 IP''s in a DMZ and the reset

My provider is getting ready to switch my DSL router to bridging mode and I supply the router (so I can get no only IPv4 addresses but also IPv6 addresses!). Here are his 'instructions' to me: "Basically you start pppoe, I give you the username and password for it, and then I set the router to passthrough modem mode, and you initiate the PPPoE session directly with my LNS back

Hi all I get a Cisco 1841 router, connecting the office through a CHAP PPPoE link: [...] interface Dialer1 ip address negotiated ip mtu 1492 ip nat outside ip virtual-reassembly encapsulation ppp ip tcp adjust-mss 1452 dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap callin ppp chap hostname username at isp ppp chap password 0 s0meStr0ngP4sswd [...] As

Hi, I currently connect to my ISP via my adsl modem in bridge mode and PPPoE. I am due to put a second PPPoE ISP onto my firewall box which will give me ppp0 (general) and ppp1 (static leased line). The static leased line will run a number of services on its static IP and it is therefore imperative to make sure rules defined for the static line are assigned to the correct interface. I need this to

I have a requirement which I guess it is not too unusually, however I haven''t quite figured out how to do it and couldn''t find any examples which handle that. I have made myself a Linux-based bridge, eth0 bridged with eth1 to form br0. In this bridge, I run ''tc'' script to handle QoS. So far nothing unusual. However, what''s different is that this

I am a newbie to linux and shorewall. I am reading the shoreall quickstart guides. I am a bit confused about the following statement: ----------- quote -------------- The firewall has two network interfaces. Where Internet connectivity is through a cable or DSL "Modem", the External Interface will be the ethernet adapter that is connected to that "Modem" (e.g., eth0) unless you

Hi I have a strange problem. I have a firewall with 3 nics. 1 - lan 2 - leased line or diginet 3 - connected to adsl modem I have 2 tables in defined in /etc/iproute2/rt_tables: 200 diginet 201 adsl The ADSL modem has an IP of 192.168.0.1 and is configured to initiate the PPPOE connection. I can mark packets within the network destined for port 80 successfully: ip ro add default via x.x.x.x

Hi all, I'm trying to do the following (ASCII art diagram viewable in fixed-width font at end of message): Take 2 private LANs, seperated by the internet, and bridge them by creating a bridge from 2 ethernet devices and a ppp interface tunneled over ssh between the two linux boxes concerned. The setup on each of the two networks is nearly identical, and is as follows: The network has

Clients: Some sites just show the top area not the full page. Some sites cant be reached at all. I think it 90% may be the MTU/MSS problem. But I already have set the shorewall.conf CLAMPMSS=1400 or CLAMPMSS=Yes, but it doest make things good. I would be mad. Anybody helps me would so appreciated! If you want know more info. to diag my problem, I would be please to.

Hi, I''m in a process of setting up a firewall system, which is going to be also an ipsec/l2tp and pptp vpn server for some mobile clients. The problem is, that the system has two ISPs a cable one (no problems here) and a DSL provider. Because of the DSL provider the system is going to have one pppN interface for DSL (net zone) and many pppX interfaces for l2tp/pptp (loc zone)

Hi, I have been a shorewall user for a long time now, and it has been working flawlessly. I have now changed ISP and my new DSL connection is PPPoE. My setup is as follows: internet <--------> 3com812 Officeconnect (bridge mode) <----> eth0 <-------> linux box <----> eth1, eth2, eth3, eth4 <---> other internal networks Things are working fine, but the link is

Greetings, I've just upgrade a home server to CentOS 6.5 with a new dual-core processor and mobo. I see that with the CentOS 6.x release rp-pppoe can be run as a daemon. I've looked through some online one-page setup notes for rp-pppoe, but nowhere is there a discussion of running it as a daemon. Until now, I've cobbled an ifcfg-ppp0 file and placed it in

Hello guys, I have two ISP's connected to my router. One via eth2, second one via ADSL modem, with ppoe doing on my Centos 5 . The problem I have is, that when ADSL fails , interface ppp0 is removed. This also removes my static routes configured for this interface. I do not want that, as I have load balancing configured and default route is removed when ppp0 interface disapears. This is my