similar to: udev by-id symlinks randomly missing for tape drives on centos5

Hi All, I've written a custom udev rule to change the permissions of /dev/ttyS* but it doesn't seem to be working at boot up. If I run /sbin/udevcontrol reload_rules; udevtrigger The rules are parsed, applied and the permissions are then correct but why is it not doing so at boot? The file in questions I've called /etc/udev/rules.d/49-udev-override.rules and it contains

Hello All, I'm trying to do a fresh installation on Ubuntu Server 9.10 (Karmic) 64-bit but I am getting error when "make config" is trying to install the init script... Here is the output: - Can anyone help me please... Thanking in advance... Cheers, Nitesh ################################################### ### ### DAHDI tools installed successfully. ### If you have not done

I've gotten to the point wih an R script where I would like to encapsulate several blocks of codes in R functions. In order to keep the top level script simple I would like to put them in a separate file. This should help the readability of the top level main script. Is source(...) the best way to load those functions in the top level script? For example, in the top level script Line# 01

Stephen, I see lots of answers with packages and resources, but not book recommendations. I have used Introduction to Data Technologies by Paul Murrell (https://www.stat.auckland.ac.nz/~paul/ItDT/) to teach SQL and database design and would recommend looking at it as a possibility. On Mon, Aug 28, 2023 at 9:47?AM Stephen H. Dawson, DSL via R-help <r-help at r-project.org> wrote: > >

Hi there, I am pricing out a dell 840 (low end file server) that will run latest centos. Can anyone recommend a good tape drive/card combo with centos? The drives (to be backed up) in it will be a raid 0 - 500gb. Thanks in advance! Dustin

Hi all, Being recently new to Samba. I want to know what some of you consider a really good tape backup. And, what software to run it with. I want to be able to offer customers daily full backups that the restores will work well with Samba. My understanding is smbtar only uses tar. Is there something even web based I can use. (for the guy just getting out to new small networks..and not to

Author: rralphs Repository: /hg/zfs-crypto/gate Revision: 10ba48f9b729659165d98f28bf3c74770986fae2 Log message: 6224221 cannot unconfigure fc tape device that has been physically removed 6252197 System panic in st:st_runout during ISL fault test 6260355 st_gen_mode_sense and st_genmode_select do not set a timeout value for uscsi_cmd Files: update: usr/src/uts/common/io/scsi/targets/st.c update:

Hi, we have installed ocfs2 on Rhat 4. It is being used as a general clustered file system. There are no oracle binaries or datafiles on the ocfs volume. So no need for RMAN or oarcle agents etc etc. The customer would like to backup the volume using arcserve. However CA are saying that they cannot backup from an ocfs volume. Has anyone out there got any words of wisdom about backing up

J'ai un COLORADO tape en /dev/ht0 Comment le déclarer dans Wine.conf pour y accéder ? Merci A+

Hello all. I'm struggling to get Centos 4 to recognize my Dell Powervaul 132T tape changer. The system doesnt create a device node for it. [root at orion scotty]# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SEAGATE Model: DAT DAT72-052 Rev: A060 Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 01 Lun:

Hello, i'm trying to configure a host SCSI device (tape drive) so that it is available in a KVM guest VM, but am receiving an error when attempting to attach the device. My guest xml has the following scsi controller defined: <controller type='scsi' index='0' model='virtio-scsi'> <alias name='scsi0'/> <address type='pci'

A quick follow-up in case anyone else is trying to use IBM tape device within a KVM guest. I didn't get SCSI passthrough below working, but there were two alternatives recommended to me: (1) Use PCI passthrough to give the KVM guest dedicated access to the Fibre Channel HBA PCI card. PCI passthrough seems to be more solid. (2) Use ISCSI to share the tape devices and tape changer

What module I can run for my IDE Device Tape? In the Debian use modprobe ide_tape Error: FATAL: Module ide_tape not found. Tanks -- Cimed Ind. de Med. Ltda Mauricio Merlin Machado Analista de Suporte Tel. (11)2244-7257

I'm trying to get a scsi tape device (Sony SDX-D500V) working on my dell 2450 running centos 4.2. I can see the device (ch1, id2) using the dell bois raid utility, but once booted into linux I can't see any mention of it in the logs or dmesg. Do you know if the generic kernel (2.6.9-22.0.1.ELsmp) supports this tape device? Can anyone give me any pointers in getting this device working.

I just got an error using star to send an archive to tape. I know the tape works--I tested it with gnu tar yesterday. But when trying find /home -mount -depth -type f | star -c list=- -z f=/dev/st0 I got the error: star: can only copy files When I wrote to the tape with tar yesterday, tar -zcvf /dev/st0 /home/matt worked fine. And that star command works when the output destination if a file

Hi, after installing centos 4.2 I've noticed that my internal Seagate scsi DAT 72GB tape drive hasn't been recognised in /media or doesn't show up in gnome when putting in a tape. Do I need to edit fstab first or load additional modules in the kernel during startup? regards, Geert -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I want to backup my PE2800 on tape but I'm not sure how to do this. My PE2800 has a RAID5 setup with 2 72GB SCSI disks and a Seagate DAT-2 72GB internal tape-streamer and I'm running Centos 4.3 with the latest yum updates. I'm not sure if this tape-streamer is recognised by the OS properly because it doesn't show up along with my DVD/floppy I also recieved with the

I posted this in the Bacula list without success so I hope I might have some luck here. Btape and mt can access my DDS-3 Seagate Archive Python 06480-xxx tape drive but Bacula tray-mon ends up finally stating that it cannot open device /dev/nst0? That is the device string that I use to access the drive, oddly enough it also suggest the SD could not open the one file based storage location I have

I have an Overland tape library connected, via SCSI card, to an out-of-box, full install of C5 install on an old PC. I have a script that uses tar to archive data to tape and mtx to change tapes. What I don't know, if possible, is to obtain the status of how much tape is left in the drive. If I get a write failure, I'd like to know if the tape is bad or has run out of space. I

hi all, i want to use a compaq sdlt 320 under centos. the tape drive was already installed and after rebooting i was not able to see it(dmesg | grep tape or dmesg | grep scsi). i add the correct module (modprobe st) but i'm not able to use with mt. the st0 file is missing, can someone help to resolve this issue. thanks ?