similar to: 3D acceleration not running

Last Thursday, for some reason (possibly a power failure), my work desktop had a different video configuration than when I left Wednesday evening. I have two 17" flat panels configured as a two-head wide (side-by-side) single display. When I arrived on Thu, I had two individual desktops instead, the resolution was down to 800x600, and so on. The monitor type had been reset to generic

Hello, I'm having big trouble getting wine to work. What I basically want to do is get steam to work, now it even fails to launch at all. It updates to 99% and then it segfaults. Other games has done this too (rollercoaster tycoon 2, starcraft 2). I followed the instructions on winehq, removed oriya/samyak fonts and I don't think I've done anything wrong - I've installed steam

I try to install the latest nvidia driver. kernel is 2.6.12.6(xen 3.0) and Xorg is used. Everything is ok except monitor. I''m sure that X is running. No error information. Some warning information is here. (II) NVIDIA(0): Setting mode "1600x1200" (WW) NVIDIA(0): WAIT (2, 1, 0x8000, 0x00000000, 0x000005e4, 0) (WW) NVIDIA(0): WAIT (1, 1, 0x8000, 0x00000000, 0x000005e4, 0) (II)

I just purchased a Dell Inpiron 9300 from the Dell Outlet store. Installing CentOS4 went very, very smoothly until I tried configuring X. The 17" screen has a 16:10 aspect ratio with a 1920x1200 resolution. The best I could manage using system-config-display was 1600x1200. So, after a bit of research, I hand editted the xorg.conf file (reproduced below) and it now works great. Maybe

Hi I am trying to get Battlefield 2 and Battlefield 2142 to launch under Kubuntu 10.04 & Wine 1.3.6. I'm using an Nvidia 8800 GTX 768Mb GPU with Nvidia blob driver 260.19.12. Anyway launching BF2142 (retail copy, patched to v1.5) gives me the following error (2x) in the console output streams: Code: ... err:x11settings:X11DRV_ChangeDisplaySettingsEx No matching mode found 800x600x32

Hi, Thanks for your advice..! I have a few follow-up questions (tagged below Q1, Q2 and Q3). Any help highly/extremely appreciated. Regarding to "reverse prime", etc. I have read the following page: https://nouveau.freedesktop.org/wiki/Optimus/ So, if we want a single "macro" xscreen that spans two cards, for example: Card 0, connected to monitor 0 Card 1, connected to

I've successfully set up 3 machines now (2 nvidia and one radeon 7500, all ubuntu gutsy) with compiz and aiglx and have been very happy with compiz on all of them. Scaling is wonderful. I'm trying to do my main workstation now which is a multihead (dual) configuration with an nvidia 6150: 00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2) Both displays

I just put a 1680x1050 LCD monitor on my home system, and I went into system-config-display to configure it as such, and it just won't take. I had to tweak some of the settings by hand, but when I log out, I get the wide screen for both the Nvidia driver splash screen and the login screen. But, when I log in, It jumps back to 1280x1024 and refuses to run in wide screen mode. Here's the

I am trying to use 0.9.34 to run Everquest. I can install and run the patcher, but after that, it always crashes with an error similar to the following: fixme:advapi:SetSecurityInfo stub fixme:d3d:IWineD3DDeviceImpl_EvictManagedResources (0x17ce68) : stub fixme:d3d:IWineD3DDeviceImpl_GetAvailableTextureMem (0x17ce68) : stub, simulatin g 64MB for now, returning 64MB left

I've been working hard to get my Wacom tablet to work as my primary pointing device. I've installed the drivers and followed the instructions at the Linux Wacom project at Sourceforge. And I've been largely successful. The drivers are working, the configuration utilities are working. I'm just one step away from success. Apparently the problem is that my mouse and my USB tablet

On 5/9/07, Jeff Stacey wrote: > A quick google turned up this > > http://gentoo-wiki.com/HOWTO_Dual_Monitors#With_the_proprietary_binary_driver > > Newer ati-drivers come with a handy aticonfig script that actually > produces a working dual-head setup. This is the quick-and-easy way. Log > out of X, backup your xorg.conf and run something akin to the following > line: >

I can play WoW perfectly, it is 100% stable and I can get great fps. One problem though, when I minimize the game and I maximize it, sometimes I can just keep playing happily but sometimes thats not the case. I minimize it, maximize it again and the FPS drops to about 10-20fps (anywhere). As you might know, this is VERY annoying, I've tried changing loads of settings in-game with no help.

Hi, I have Installed GSU 6.4 under wine it works but at dead slow space. No Crashes are observed. Save Load functions OK 2d Gfx save OK No functionality glitches are observed on Limited Test Conducted. Kubuntu, wine 1.1.2, nvidia ge4 440 GO Latest Driver from nvidia. OpenGL works fine as far as Linux desktop is concerned. When I run Sketchup the CPU utilization is almost 100%. On same machine

My apologies for being a total Wine NOOB. I've been trying to get anything to work on Wine (with little success). Panzer General II is supposed to be rated as Gold. I can get it to load fine. It starts, and I can even get to the start of a scenario/campaign. The main problem is it doesn't load the maps or anything into the map area. I ran winedbg and got this:

Hello guys, i've decided to test nouveau driver and installed it recently from official repos. My videocard is GeForce 4 with additional S-video and Composite outputs, 64 MB of memory. I installed xubuntu, and tried to use nouveau driver instead of official nvidia's. After switching driver, the boot splash xubuntu logo turned into poor coloured low-resolutioned one, but X loaded normally.

I have a Centos 5.7 machine with Intel I10 video (built-in, I guess -- this is one of those all-in-one mini terminal things) that I'm trying to put a new 1920x1080 monitor onto, without conspicuous success. Prior to this it's been using a smaller monitor with no issues. Try as I might I can't get the new monitor to run at its 1920x1080 resolution. I just realized that I forgot to

> Maybe there is a better place to post this message but as my question > was still CentOS related thought I would start here. Please advise if > there is a better forum of which to ask this question. > > I am playing around with making a "desktop" workstation out of a > Raspberry PI3. I have had no problems installing the OS and pretty much > have everything working

My OQO has a VIA chipset. From the hwconf: class: VIDEO bus: PCI detached: 0 desc: "VIA Technologies, Inc. CX700M2 UniChrome PRO II Graphics" vendorId: 1106 deviceId: 3157 subVendorId: 1106 subDeviceId: 3157 pciType: 1 pcidom: 0 pcibus: 1 pcidev: 0 pcifn: 0 When I install Centos, I default to the vesa driver, and it operates at the monitor's native 800x480. Of course I

I have recently migrated from an old, RedHat Linux 9 - based system (Aurox 9.2) to Centos 4.4. I am having trouble with vnc causing X unusable until reboot. By unusable I mean that X screen is either blank or blinking and moving, which is not cured by X restart until reboot. My system is: Compaq EVO D510 SFF CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz RAM: 256 MB Video: 00:02.0 VGA compatible

Hello CentOS-Community, I have to maintain a server that should be useable with VNC and some software requires to run VirtualGL. Also a nvidia graphic card is installed. After downloading and installing the nvidia driver from nvidias homepage and modifying the xorg.conf as mentioned on the virtualgL-homepage, I am not able to restart lightdm anymore. Lightdm should be running, otherwise