similar to: what requires lm_sensors?

Hi All, I'm trying to get lm_sensors to work on a Shuttle with an AMD K10. The version of lm_sensors in the main CentOS repo is 2.10.7, which is two years old now. Support for the K10 was added about a year ago. So, does anyone know if there are binaries available for more recent versions of lm_sensors? Also, if anyone has knowledge of the sensors layout for recent Shuttle AMD motherboards,

Problem and solution, not sure if correct After upgrading to 5.1 and restarting, lm_sensors complained "General Parse Error." Google pointed here: http://www.lm-sensors.org/wiki/Devices Where I found this under "SENSOR CHIP DRIVERS - STATUS" AMD --> "Since Kernel 2.6.19" Latest AMD K8 processors have integrated sensors which can be read directly without any

Hi all :) Using lm_sensors, I can see few temperature indicator. M/B Temp: +39?C (low = +15?C, high = +40?C) sensor = thermistor CPU Temp: +33?C (low = +15?C, high = +45?C) sensor = thermistor Temp3: +53?C (low = +15?C, high = +45?C) sensor = diode What is that Temp3? It's the hottest. Which one is the best to use if I want to use lm_sensor as a general

Sorry if this has been around many times before, but I've done quite a bit of reading and searching for some type of human readable guide for setting up the lm_sensors for hardware monitoring. I've dorked around with the stuff in the system here, but after looking at the /etc/sensors.conf, I don't think I want to delve into that and try to pull out the right group of settings.

hello, I have problem to install lm_sensors on CentOS 4.5 (Linux 2.6.9-42.ELsmp). I am getting error message "FATAL: Module bmcsensors not found." after I enter "modprobe bmcsensors". I got advice to install http://bmcsensors-26.sourceforge.net/ into my kernel, but I don't know how to do it. Does somebody has experience how to get lm-sensors working on CentOS 4.5 ?

Dumb question: how do you start lm_sensors' fan control at boot time? Centos 6 here

CentOS Errata and Bugfix Advisory 2012:1309 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-1309.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a41983848e162aabb0fe146db72c0aa38189dde131820336cc550c29f2a7cd43 lm_sensors-3.1.1-17.el6.i686.rpm

CentOS Errata and Security Advisory CESA-2005:825 lm_sensors security update for CentOS 4 x86_64: https://rhn.redhat.com/errata/RHSA-2005-825.html refers The following updated files have been uploaded and are currently syncing to the

I have a Tyan Thunder K8HM (S3892) motherboard and I am trying to get lm_sensors to work with it. The problem is that I am getting conflicting information. The source for lm_sensors says not to compile the modules for the 2.6 kernel. The information from Tyan says that I need to compile the modules if my kernel is less than 2.6.12. Has anyone here configured lm_sensors for this motherboard?

CentOS Errata and Security Advisory CESA-2005:825 lm_sensors security update for CentOS 4 i386: https://rhn.redhat.com/errata/RHSA-2005-825.html refers The following updated files have been uploaded and are currently syncing to the mirrors:

Hi, I managed to get my C4580 (4500 series) connected to my router to work with 64 bit 5.3. That printer needs at least hplip 2.8.10 which I found at http://rpm.pbone.net/index.php3/stat/4/idpl/12086038/com/hplip-2.8.10-0.1.el5.test.x86_64.rpm.html It was just a matter of following the manual install instructions for hplip here

CentOS Errata and Security Advisory 2005:825 https://rhn.redhat.com/errata/RHSA-2005-825.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/alpha/RPMS/lm_sensors-2.8.7-2.40.3.alpha.rpm updates/alpha/RPMS/lm_sensors-devel-2.8.7-2.40.3.alpha.rpm -- Pasi Pirhonen - upi at iki.fi - http://iki.fi/upi/ -------------- next part

Hello, maybe you're interested in building an rpm of lm_sensors containing a more recent lm_sensors rpm (latest snapshot 'r4197-20061007'). Then have a look at http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018052.html Perhaps there's someone who wants to take over maintenance for building this rpm from the snapshots in some other repo than the base one... (I

Has anyone succeeded in getting lm_sensors to produce useful output for intel D945-based motherboards? According to the lm_sensors site, I need a newer kernel (2.6.16) to read the ICH7 data. I noticed the i2c patches in the kernel source rpm, but no joy. I'd be okay with building my own modules, but haven't found anyone to provide the kernel module source apart from the kernel

Trying to get cpu temps from lm_sensors for a Tyan s4985 motherboard, just installed centos 5.4. Tyan release some lm_sensors conf files and other information which I have done, but I am not getting any cpu temps. I was wondering if anyone out there was running this board and if you have gotten temps working for your cpu, here is my output...Thanks in advance. w83627hf-isa-0c00 Adapter: ISA

Hey folks, I'm running RHEL 5.3 on 6 boxes - and on every one of them sensors-detect finds nothing. 5 of them are Sun fire 2250 machines, and 1 is Sunfire 4170. Googling and searching this list does not seem to find anything. When I log into the Sun hardware management interface (web interface) I see that it of course is correctly detecting various temperatures of things. But for some

hi all, I am trying to get lm_sensors to work. did the yum install lm_sensors service lm_sensors start sensor -s and it says no sensors found. did lsmod | grep it87 and it87 57061 0 hwmon_vid 35905 1 it87 hwmon 36553 1 it87 i2c_isa 39105 1 it87 i2c_core 56129 5 it87,i2c_isa,i2c_dev,i2c_ec,i2c_piix4 Seems like

On Monday 12 December 2016 12:15:10 David Both wrote: > The lm_sensors package is required for the sensors module of glances to > work. After installing lm_sensors, run sensors-detect. The sensors > command will show the sensors detected and their current values. glances > should then display the sensor readings. Somewhere tucked in the back of my mind a memory is screaming no.

Has anyone gotten lm_sensors to work on a CentOS3.3/RHEL3 box? I think I'm having CPU temperature-related problems, and wanted some way to monitor it. I believe lm_sensors does this, but can't seem to figure out how to get it to work. I already did "yum install lm_sensors" but when I run sensors-detect, it complains: Couldn't open /proc/bus/i2c?!? at /usr/sbin/sensors-detect

hi there, i am using k8v se with amd64 3000+. i installed centos 4.4 onto my computer. my computer initially worked very well, but Cool'n'Quiet? on my computer does not work after installing lm_sensors. it means that the cpu fan is blowing and core voltage is maxmam (1.47v?) ALL THE TIME. there is no strange log on /var/log/messages. how can i solve this problem out? is there anybody