similar to: g_vfs_done()...errors

Is there anyone out there who has installed FreeBSD on the above Sony laptop ? Both ''cat filename > /dev/dsp0.0'' or ''vlc cdda:///dev/acd0@1 are OK. If I run ''cdcontrol -f /dev/acd0 play'', there is no sound. But the output of ''cdcontrol -f /dev/acd0 status audio'' is alright. (same behaviour for cd0 instead of acd0) And the output

I've been trying to get a problem fixed with a Highpoint 1820a crashing out with errors like: kernel: IAL: COMPLETION ERROR, adapter 0, channel 2, flags=104 kernel: ATA regs: error 10, sector count 20, LBA low ff, LBA mid ff, LBA high ff, device 4f, status 51 which results in the disk being dropped from the array. A sharp eyed engineer at Highpoint has just spotted the fact that the read

I have a FreeBSD 6.2-based server running a 1.2TB graid3 volume, which consists of 5x 320gb SATA hard drives. I've been getting errors in /var/log/messages from the graid3 volume, which I suspect means an underlying fault with one of the disks, but is there any way to decipher which one of these drives is throwing errors? I've checked smartctl -a /dev/adXX but nothing shows up there..

While trying to speed up nanobsd builds, I mounted /usr/obj on a ramdisk and found my box crashing. Thinking it might be hardware, I tried a separate machine, but with the same results. I have 4G of ram (i386). Am I just running out of some kernel memory ? If so, is there anything I can adjust to prevent this, yet still use mfs in this way ? mdconfig -a -t malloc -s 1800M newfs /dev/md0

When ever I try try to mount any burned CD/DVD media I get the error below. mount_cd9660 -v /dev/cd0 /mnt using starting sector 0 mount_cd9660: /dev/cd0: Input/output error Exit 1 Which in dmesg results in... g_vfs_done():cd0[READ(offset=-2207623839744, length=2048)]error = 5 This is odd because if I unplug the USB CD drive and plug it into my netbook running a old RELENG 7.0-STABLE it works.

Hi, whenever I want to mount a DVD-RAM, I have a little problem because the corresponding device entry (eg cd0a, acd0a) does not exist. This will be created after trying to mount /dev/cd0 instead of /dev/cd0a, but I am not sure if this is the correct behaviour ;-) # ls /dev/acd* /dev/acd0 /dev/acd1 # mount /dev/acd0 /home/hk/mnt/ mount: /dev/acd0 on /usr/home/hk/mnt: incorrect super

Hello, I've an SCSI version of the IOMEGA REV drive (35 GB, like ZIP drive). How can I access this drive. FreeBSD detects the drive as CDROM: cd0 at ahc0 bus 0 target 4 lun 0 cd0: <Iomega RRD 89.B> Removable CD-ROM SCSI-4 device cd0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) cd0: cd present [17090880 x 2048 byte records] I'm using FreeBSD 6.1-RC. Kind regards, Thomas.

I have an Asus A8V-MX motherboard with an AMD Athlong 64 X2 3800+ CPU and I'm trying to run powerd to keep it cooler/quieter/greener. I'm running -STABLE (6.1-RC) cvsup'ed a couple of days ago, with a kernel config that consists of the SMP sample plus an atapicam device. I'm loading the cpufreq.ko module in /boot/loader.conf. I've attached my dmesg output and sysctl -a

Morning All, I upgraded from 9.2-STABLE to 10.0-PRERELEASE #0 r259144 last night and I am now getting this every 2 seconds in /var/log/messages: Dec 10 07:54:31 Shop kernel: ata1: FAILURE - zero length DMA transfer attempted Dec 10 07:54:31 Shop kernel: ata1: setting up DMA failed cat /var/log/messages | grep ata1: cd0 at ata1 bus 0 scbus3 target 0 lun 0 cd0: <TSSTcorp DVD-ROM TS-H352C

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

So I have a system running: FreeBSD walk.dclg.ca 9.2-RC3 FreeBSD 9.2-RC3 # r254952: Wed Aug 28 03:02:55 EDT 2013 root at walk.dclg.ca:/usr/obj/usr/src/sys/STRIKE i386 and it has two 2T SATA disks. To keep this post short, the crash.txt is here. https://uk.eicat.ca/owncloud/public.php?service=files&t=fea9d25579fe0c4afb808859e80e1493 now curiously, while running a "make -j4

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

Hi, just noticed that I can't mount anything anymore on the cd[01]a devices anymore. The cd[01]c devices work correctly, as does the acd[01]a device. These are an ATAPI dvd writer (cd0) and a dvd player(cd1) trough cam(4). This applies to both dvd and cd media. Remaking the device through MAKEDEV has no influence. Nothing reported by dmesg. root@ghost ~ # mount_cd9660 /dev/cd1a /mnt

I was using a GELI partition for /usr/home on 7.0, so it attaches and mounts on boot. The problem is it stopped working after the system was upgraded to RELENG_7/7.1-PRERELEASE. Here's how it goes: I have the following /etc/fstab: /dev/ad0s1b none swap sw 0 0 /dev/ad0s1a / ufs rw 1 1 /dev/ad0s1d

If you have any of the devices listed below, please test with a recent -stable or -current. They will stop working in 4.9 and 5.2 although old behavior can _temporarily_ be enabled by adding "options DA_OLD_QUIRKS" to your kernel config. If I don't hear from anyone, they'll be going away permanently after the releases. -Nate #ifdef DA_OLD_QUIRKS /* Below a list of

Hello! FreeBSD tarkhil.titl.ru 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #5: Tue Mar 14 14:58:53 MSK 2006 root@tarkhil.titl.ru:/usr/obj/usr/src/sys/ARMADA i386 encountered problems with USB-to-IDE box and NEC CD-RW/DVD drive. Controller /dev/usb3: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), NEC(0x0000), rev 1.00 port 1 powered port 2 addr 2: high speed, self powered,

Hi there, from time to time my PC panics when I insert an empty DVD or CD-R. The kernel locks up instantly after the DVD writer's tray is closed. It seems burning the first DVD isn't critical but inserting the second one seems susceptible. I use k3b as software, which polls the hardware while the tray is open, maybe it's something with hald. Don't know, just use this. I

Hello, I am creating a domU with Ubuntu12.04, I need to provide dom0''s certain ioports(0xcd0-0xcdb) to domU. I have added *ioports = [ "cd0-cdb" ] *and tried it in the domU, its been not mapped on domU. On host I am using xen-4.2 and tool stack xl. Let me know if I have to add anymore information to config file to grant access to domU

Hi, I'm experiencing recently happend kernel panics while making bacula backups on my external USB harddisk. It first happened some days ago while I was running 6.4-PRERLEASE. I then updated to 6.4-STABLE and enabled all the kernel debugging stuff. I've uploaded "screenshots" (including backtrace) here: http://pics.pofo.de/gallery/v/misc/ I'm now not sure if the external

On 19 Jun 2013, at 13:34, Roger Pau Monné <roger.pau@citrix.com> wrote: > > Could you provide the boot log of the DomU, backtrace, Xen version and > Dom0 kernel version? I did not have a console attached when it rebooted, so I did not have a log of the initial boot. Now that I did, I see that it fails to mount its root volume. It had been running previously on pvhvm_v10 for about