similar to: USB and serial

I am new to Linux, Ubuntu, WIne etc but despite all that I am operating in Ubuntu 8.10, with MapSource 6.13.6 installed via Wine 1.0.1. I know there is an issue in getting MapSource to recognize the GPS while connected via USB but I am unable to understand the steps provided to solve this issue. I've been advised to enter "sudo modprobe garmin_gps" in terminal and to check the

Hi, I try to run a little application that must print to com1: some information. After couple of hours of "google-ing" I can't find a solution to my problem. So, the output in console (when I try to print) is: fixme:comm:set_queue_size insize 1024 outsize 1024 unimplemented stub fixme:comm:wait_on EV_RXFLAG not handled What can I do to make my application to work with wine? I have

hello when i try to run a windows program who need a serial port to run, i have this output error: fixme:comm:set_queue_size insize 5000000 outsize 5000000 unimplemented stub have anywhone a solution to solve this problem? thanks

Hi, we have installed OpenSSH_3.7.1 in /usr/local. In our environment all machines mount /usr/local via NFS and automounter from a server. Because every machine should use its own keys (otherwise we had to export the directory with root priviledges so that every machine could read the private keys from /usr/local/etc/ssh), we created the keys in /etc/ssh and modified the configuration files

It is some time that I using AirMail3 with wine. I have the latest version of Wine but after I configure the Ports from ttyR0 to ttyR7 and running AirMail3 this application is not able to comunicate using the equivalent COM1 .... COM4 ports. I'm not sure if Wine is converting correctly ttyR0 to COM1 and so forth. The result is that for the Hurricane season I can NOT use E-Mail under

Hello. I'm new to this list. After days of reading docs and googling I can say that a lot of people is trying to use wine with serial ports, but no success story found? My problem is just like in bug1244 <http://bugs.winehq.org/show_bug.cgi?id=1244> which is almost 4 years old. If I run this app <http://appdb.winehq.org/appview.php?iAppId=4165> with WINEDEBUG=+relay , I

I have a USB to serial converter attached to my box. pl2303: Prolific PL2303 USB to serial adaptor driver if I login to the box and send/receive serial commands over this unit it works without error EVERY time. however, if I run the same command set from with-in the extensions.conf with System() I get errors in dmesg like "pl2303 ttyUSB0: pl2303_open - failed submitting read urb, error

Dear all, I have not found anything with Google, so I hope it is okay to ask here. I'm trying to run a program called "Paxon" (see http://www.paxon.de) under Wine. This is an program with speaks via a serial console to a modem (in amateur radio use). The program itself runs fine, I set up the serial connection with arenber at ubuntu:~/.wine/dosdevices$ ls -lk total 0 lrwxrwxrwx 1

Hello, I am trying to run a program named "Prognos" (Version 5) for medical purposes by a Company named "MedPrevent" (http://www.medprevent.de/produkte-prognos_de.php). As installation crashed, I installed on Windows and then copied the installed files to Linux where I wanted to run the app via wine. The startup dialogs show up but then there is an error message that the

Hello! I've ran into this annoying issue when setting up a new server. I have an APC SmartUPS hooked up on a USB-serial converter on /dev/ttyUSB0. This works nicely, until: hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling... pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 usb 3-1: pl2303 converter now attached to ttyUSB1 apcsmart gets into an infinite loop of this:

I've got a USB to serial adapter that I picked up from Radio Shack earlier this year. The updated pl2303 driver is already in the mainstream kernel as per https://bugzilla.redhat.com/show_bug.cgi?id=429652 but I'm not getting much traction from Red Hat as far as them updating the kernel. So every time there's an updated kernel, I have to rebuild the srpm. I figure that this is the

hello everyone, I've been testing the NUT solution as opposed to the undocumented LanSafe application to control my Eaton UPS. I am on a Slackware 13.37 system with a 2.6.37.6 kernel. NUT version is 2.4.3 . I installed the tarball by compiling it directly on my system (as a slackbuild package). The UPS is an Eaton Powerware 9155, but I don't know how to obtain the manufacturing date. The

I have a data set like this I want to assign "outward" to Y if sc <90 and assign "inward" to Y if sc>=90. then cbind(p1982,Y) to get like these p aa as ms cur sc Y 1 154l_aa ARG 152.04 108.83 -0.1020140 92.10410 inward 2 154l_aa THR 15.86 28.32 0.2563560 103.67100 inward 3 154l_aa ASP 65.13 59.16 0.0312137 7.27311 outward 4 154l_aa CYS 57.20 49.85

I'm trying to install DAZ Studio under Wine and immediately after the splash screen it crashes out and I get a window with the following message: > Error creating directory C:/Program Files/***unknown variable system_temp_directory*** The DAZ Studio version is 3.0.1.135 for Windows. I'm running Wine 1.1.12 under Ubuntu 9.04 with GNOME 2.26.1. My video card is an nVidia GeForce

I have a Windows 2K SP2 terminal server and a Samba 2.2.7a server. The Samba server uses security=server with the 2K terminal server as the password server. Users log in to the terminal server and attempt to access (always the same) share on the Samba box. When there are no sessions open to the Samba server the connection from the terminal server always works; subsequent connections (with

Brendan Cully wrote: > > The format of ices.conf changed somewhat in 0.2, to support multiple streams > from the same playlist with different reencoding options. In short, these > settings have been moved into the Stream node. For more info have a look > at the sample ices.conf included with the distribution. I did modify my ices.conf when I made the upgrade. Here's my

Hi! I'm having problems with SeaClear II v1.0.0.196. After setting up the symlinks in ~/.wine/dosdevices pointing to my gps-device (GlobalSat BU-353 USB) everything works as expected, but for some reason Wine/SeaClear steals all available CPU-time. 100% all the time. This problem does not exist if I start SeaClear with the GPS disconnected, making me belive there is a problem with

Emanuel Strobl wrote: > Am Dienstag, 18. Januar 2005 16:17 schrieb Andrew L. Neporada: > > On Tue, Jan 18, 2005 at 01:06:43PM +0100, Emanuel Strobl wrote: > > > Dear experts, > > > > > > I have two USB-RS232 Adaptors, both with PL2303 chipset. One is working > > > the other one not (I hate to say it but both are working under win). > > > >

Hi, I have a list which looks like this... > str(y) List of 10 $ : chr [1:4] "ABCD" "5" "0" "1" $ : chr [1:4] "DEF" "15" "1" "16" $ : chr [1:4] "AAA" "2" "17" "8" $ : chr [1:4] "SSS" "15" "25" "1" $ : chr [1:4] "III"

Hi, Since Sharps communication protocols are "top secret", I'm trying to port their sync software to linux. I'm new to wine, so this might be silly, but after hours of googling and searching for solutions I'm posting this. After installing DCOM98.exe, the Desktop software installed, and it runs. Only problem is it doesn't detect the device connected to the serial port