similar to: Joey the passion multiplayer

Im using wine 1.1.40 on Ubuntu 9.10 I get error when i try to play over LAN which says: Please install directx9 Have no clue how to fix it [Embarassed]

Hi ! Recently i switched my internet provider, to get more speed but another braindead setup regarding public ip addresses. I now have 4 PPTP Tunnel available, of which i''m using one as the gateway ip doing masquerading to other machines in my local lan, excluding three other machines, which i would like to use 1:1 nat to get them a direct access to one of the pptp tunnels. I was

Shorewall 4.5.1.1 I have 5 interfaces on a centos box, the first two are internal on two different subnets, the next two are two different ISP''s and the last one is a private network for testing and administration. The second internal subnet (eth1) is rejecting all the arp requests to it and I get the following in the log files ever second or two - May 16 05:28:54 services kernel:

Hello everybody. I could not find an answer to my problem in the archive. (But that may just be me :-) ) I have a problem with proxy arp and connection from loc (localnet) and from the firewall. Works fine from internet to dmz / proxy arp and vise versa. I have a feeling the solution is simple, but I''m no guru in Linux routing etc. The problem seems to be the routing setup. loc -

Greetings. I run an Amateur Radio system (ampr.org) that requires 2 public ip''s on a RH 9.0 box. The primary one is 209.52.173.97 and is used for connections to the normal linux system and the usual apps such as web, ssh, smtp, etc. The secondary address is 209.52.173.98 and is routed via a pseudoslip link to the systems ampr address of 44.135.163.21. This setup takes place in the

OK one factor that I had not mentioned previously is this is my first time running Debian (yes I managed to do that since 1997...). Yesterday I found /etc/network/interfaces and understood what it does! My system is like the "About My Network" example except that I have 2 class Cs in the DMZ. >From what I understand I use the same IP on the NET and DMZ interfaces. I don''t

I''ve set up a simple 2-interface Linux router using shorewall-perl 4.0.8 (and upgraded to 4.0.9). Everything works flawlessly. One small exception I have noticed (since I''m a new shorewall user I assume this is probably an error on my part). 1. Problem: With no "logmartians" entries in /etc/shorewall/interfaces, shorewall-perl sets

(Sorry, my previous post was sent in HTML format) I am having a hell of a time with shorewall... I have a Dlink DCM202 Cable modem with the Ethernet connected directly to eth0 on the linux box. Then I have a second nic on the linux box connected to a hub for the internal network. I am trying to allow traffic from the internet connect to my FTP and WEB servers on my Winbloze box on the lan.

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on

Hello, I''m working on a Shorewall-1.2 setup on a _remote_ debian (woody) firewall with several live web and mail servers behind it. I know doing this remotely is a *really* bad idea, and I''d rather not be in this situation, but so it goes... Worst case scenario, I lock myself out and have to drive an hour to get physical access to the machine and restore service. Anyhow,

Hello, I have this problem: when my mail server on the DMZ starts a connection to the internet it''s ip (213.58.230.26) is "masqueraded" with the firewall ip (213.58.230.50). I wouldn''t mind but there is a one customer who rejects the connection because it makes reverse dns and finds no dns entry for the firewall ip. How can i correct this? Thanks, MSantos shorewall

Hello, I cannot establish Xserver connection via wireless subnet, while telnet is working fine. There was a similar problem before in Shorewall over IPSEC that Tom had fixed. Also, ping is working, but traceroute is not. Finally, PuTTY gets a connectivity error after couple minutes of inactivity over wireless when connected to the firewall/gateway. Wireless is configured per instructions in

(anonymous post) I have a simple 2 interface firewall setup and all is good, almost. I am hosting virtual websites and DNS behind shorewall no problem. However I am trying to use SFTP via a different port number and have no luck even though Putty works well. Is there anything weird to sftp and shorewall? My lab uses a different firewall (firestarter) and it works OK. I am using; DNAT net

Hello All, I have a question about setting up the shorewall firewall for squid, I followed the instructions on "Using Shorewall with Squid" --> "Squid Running in the DMZ" section. For some reason I am unable to get the program to work. I am able to have the squid work properly by using squidclient program, but once I setup the firewall to use the redirect I am unable to

Hi Alex, and thanks for your time. Probably not. The servers are only configured like they where when they where parallel to the fw. Just the default gateway, same as for the external interface on the fw. That''s what the documentation instructed to configure the servers using arp. But is it required with extra configuration on the server connected via proxy arp? Or is it some parameter

Hi, I have two public ip''s and i want to dedicate one ip for incoming and outgoing to one server. I followed http://www.shorewall.net/shorewall_setup_guide.htm and used the example of the daughter system. I have a machine connected on vmbr0 with address 10.10.10.1 listening on port 80 www. Still I can''t connect to this system. I''m forgetting something? Sincerely,

Hello Tom, I have successfully configured proxy arp subnettinng on my network with three hosts in a Dmz. And it works great. (using proxyarp in interfaces) I also tryed this on network below same trouble. However for this network below I have tryed to configure one host in a Dmz (using /etc/shorewall/proxyarp) which works and comes up after I set it up and clear Isp''s arp

I''ve got shorewall installed on Mandrake 9.0 As I boot my computer ( single workstation ) I do not get any connection to the net before doing; shorewall stop, shorewall clear, shorewall restart. Only after giving those three instructions everything is normal. Is there an easy way fixing this ? Or else how can I prevent shorewall starting-up at boot, in order to start it manualy once the

I''m working on setting up a new router/server/etc. box. I''m using Proxmox as the base system (Debian Lenny basically). I''m trying to figure out the right way to configure Shorewall on it. I''ve looked at some of the bridging info but they seem to all be talking about single-interface setups. Could someone look over my setup and give me some input into the

Dear List, I am trying to setup shorewall on a co-located server which is part of a /24 network of which I have 5 IP addresses. Here is my setup in more detail: [root@mail root]# shorewall version 2.0.9 [root@mail root]# ip addr show 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host