similar to: [Bridge] Max length of bridge device name?

Santiago, I appreciate your offer. I'm not really a kernel hacker, however I do know C and I would be willing to try if you point me in the right direction. Here is my first attempt using Debian running on an UltraSPARC: debian{root}:/root<512>strace -f -F -v brctl addbr br0 execve("/usr/sbin/brctl", ["brctl", "addbr", "br0"], [/* 16 vars */]) =

re can somebody tell me what am I doing wrong (at this late night hour), because vlan are not getting bridged at all. ifconfig eth0 0.0.0.0 up ifconfig eth1 0.0.0.0 up brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth1 ifconfig br0 up vconfig add br0 X vconfig add br0 Y X = vlan-ID (example: 222) Y = vlan ID (example: 223) # brctl show bridge name bridge

Hi, This may sound crazy but I will go ahead anyway. Here's my scenario: ifconfig bond0 10.10.10.1 netmask 255.0.0.0 ifenslave bond0 eth0 ifenslave bond0 eth1 brctl addbr stp0 brctl addif stp0 bond0 brctl stp stp0 on Is this a valid scenario? I am trying to bond two interfaces and run STP over the bonded interface..The problem I am trying to solve is to run STP over aggregated links

Hello! I set up a second bridge for a second nic. i made that manually with brctl addbr br1 ifconfig br1 up is there an "official" way how to configure such a second bridge in ''/etc/xen/*'' regards! _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I am so out of my depth on this one, but I would welcome some help. I have the following network and did get it to work with m0n0wall (a BSD firewall) an option called "transparent bridge". I've switched to Clark Connect because of its support for content filtering, and installed bridge-utils. I have a home network based a single WAN-facing NIC, eth0, that gets a public IP address

Hi, I''ve been using puppet for about a week and a half now, and it''s definitely making my life a lot easier. I''m using 0.24.1 and I''ve run into a small snag. I''m trying to write some code to make sure user home directories exist for users in LDAP. I''m trying to get their uid, gid and home directory from getent with something like: $uid =

The network-bridge script fails when setting a few sysctls which are only available if ebtables is present in the host kernel. Fix by ignoring the return value of the sysctl command. Signed-off-by: Avi Kivity <avi@qumranet.com> Index: xen/tools/examples/network-bridge =================================================================== --- xen/tools/examples/network-bridge (revision 991)

<I apologize if this arrives twice... I sent it first from an non-subscribed address, don't know if that'll get to the list or not --JJ> Hi folks, I have an implementation question regarding bridging on a linux box between a catalyst trunk port and a cisco 26something w/802.1q subinterfaces. So right now, there's no vlan trunking going on on the link my bridging firewall sits

I'm sorry to bother you but I'm stuck I can not make a bridge work for me. My current configuration is: eth0 Link encap:Ethernet Hardware Adresse 00:1d:7d:d1:06:bd inet Adresse:192.168.1.1 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21d:7dff:fed1:6bd/64 G?ltigkeitsbereich:V according to all what I could find in the net. The following should

Hi, I'm using linux 2.6.21.5 and our kernel is freeze. The problem is, if I create a Software bridge using $brctl command. and add two interfaces say, eth0.0 and eth0.1 using $brctl addbr br-lan $brctl addif br-lan eth0.0 $brctl addif br-lan eth0.1 and when i send traffic from a host connected to one port to host connected at other end, soon all the memory is dried up and and kernel

On 05/01/2020 01:40 PM, Wyatt Childers via llvm-dev wrote: > I agree with everything said here, to me this seems like the most sane option. It seems like this approach could also be tested at a smaller scale if there are concerns about deleting a repo, to see if there is any observable effect. > > While I haven't performed this particular trick on Github, based on my experience

Hi, I had successfully setup my bridge (br0) but after few minutes the br0 interface seems not working. ifconfig eth0 0.0.0.0 ifconfig eth5 0.0.0.0 brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth5 brctl stp br0 on I check on my system's /var/log/syslog file. It shows something strange messages as below: - Jan 2 10:44:22 fw01 kernel: ipt_tcpmss_target: bad length (64 bytes)

Hi! I have an bridge that keeps crashing (random times .. days with 5-6 crashes with normal functioning of 1-2 weeks) my machine that is used also as gateway (nat). the problem is that i don't have an log of the kenel panic so i don have what to post ... The configuration of bridge is like this: (each eth0 and eth1 are in different vlans in switch) $IFCONFIG eth0 0.0.0.0 $IFCONFIG eth1

Hi I intent to use brctl to bridge two devices on linux box. One is eth0, the other is USB net which is recognized as usb0 by linux box. Then I run following command # ifconfig eth0 down # ifconfig usb0 down # brctt addbr ipbr # brctl addif ipbr eth0 # brctl addif ipbr usb0 # ifconfig eth0 up # ifconfig eth0 0.0.0.0 # ifconfig usb0 up # ifconfig usb0 0.0.0.0 # ifconfig ipv6 up

When the following commands are executed: brctl addbr br0 ifconfig br0 hw ether <addr> rmmod bridge The calltrace will occur: [ 563.312114] device eth1 left promiscuous mode [ 563.312188] br0: port 1(eth1) entered disabled state [ 563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects [ 563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G O

Hi, I added below code in /etc/rc.d/rc.local in order to load the bridge brctl addbr br0 brctl addif br0 eth0 brctl addif br0 wlan0 ifconfig br0 up but it fail, i found error in /var/log/message said localhost: modprobe: modprobe cannot locate br0 modules but i found it said suceedly up the br0 interface anyone know? ===== Ô¸ÄúÓÀÔ¶ÐÒ¸££¬¿ìÀֺͰ²Ïê Happy & Healthy Always ! ^_^ !

I've got a 2.6.8 kernel with bridging enabled as a module, two nics (LNE100TX and RTL8139) and i've run the following commands with no errors modprobe -v bridge brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth1 both interfaces have 0.0.0.0 as their addresses and brctl showmacs br0 shows the macs for both internal cards. However, bridging doesn't seem to be working at all.

When the following commands are executed: brctl addbr br0 ifconfig br0 hw ether <addr> rmmod bridge The calltrace will occur: [ 563.312114] device eth1 left promiscuous mode [ 563.312188] br0: port 1(eth1) entered disabled state [ 563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects [ 563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G O

Hello all, [Sorry if this has been covered already - I searched back a little way in the archive and didn't find anything recent on the topic.] I'm wondering if it is possible to customize the way dovecot creates or modifies filenames in the maildir directories? I'm watching how my mail system works, and I see that procmail creates a new file in the <folder>/new directory,

[desktop] ----- lan ----eth0 [notebook] eth1 192.168.?.? ` ----- wlan ---- [speedport(hub and router)] -- internet 192.168.2.x So on my laptop I have eth0 beeing lan, eth1 beeing wlan ethernet card. When only using eth0/1 everything is fine. Now I want to be able to use internet from both [desktop] and [notebook]. Typically you set up a bridge with