similar to: [Bridge] bridge between wireless and ethernet card?

Hi all, I'm trying out bridging for my wireless and wired LAN, so that they can both use my PPPoE connection. Here's the network structure, pretty easy: darjeeling (192.168.1.7) ringo (192.168.1.3) (mtu 1500) (mtu 1500) \ / \ wlan0 <--br0 (mtu 1500)--> eth1

I have a system that does *not* have a graphical desktop installed, nor do I ever plan to. I have its wired ethernet working just peachy. Now I want to configure a USB wireless ethernet and scratching my head. Particularly since I don't use NetworkManager, everything is manually configured. That said, if I enable NM, I see this in /var/log/messages: NetworkManager[26900]: <info>

Hopefully this is a simple answer. I am new to setting up bridges on a linux system. Here is what I have set up: Laptop directly connected to the eth0 port on the bridge (A Soekris 4521 board). The otherside of the bridge is a wirelass lan card (SMC2532b-w) as wlan0. The wlan0 is setup in managed mode to communicate to my test ap2000. When I do a 'brctl showmacs br0' on the

Hi All, After hours of reading and trials, I got the following setup working... 1. Dell Axim X30 PocketPC with 802.11b wireless using DHCP with Open WEP -- successfully connected to --> 2. Laptop with DLink Airplus DWL-650+ PCMCIA wireless with ndiswrapper v1.1 driver with network bridge (wired + wireless) and running a DHCP server listening on interface br0 (eth0 + wlan0) Here is the

I'm trying to bridge a wired network and a wireless network, but I'm having some trouble. No traffic seems to be passing through the bridge. When I issue a "showmacs" command to brctl, I am able to see MAC addresses from both networks. I am also able to ping both networks from the bridge machine. When I issue a "showstp" command to brctl, the wireless access

I am having problem in ping or connect AP from Mobile Node(essid & channel is the same,maybe routing did not set properly but i fail to configure with route add default gw 192.168.3.4,its alway said network is unreachable ),My Mobile Node is using acx100 as driver while AP(redhat 9.0) is using HOSTAP 0.1.3.Any one can help? I heard How-To said we not need to set address on eth0 & wlan0

Hello, I want to add wireless capability to my Gentoo-linux based firewall/router at home, so I bought a Netgear MA311 PCI and installed the hostap package. I load the hostap_pci module and the wlan0 interface comes up fine. I can detect the signal from a wireless enabled laptop. Now I'm thinking I'm going to bridge the wlan0 interface and the eth1 interface, and run the firewall with br0

Hello all, I'm trying to bridge the wlan0 and eth0 on an embedded system. I used the following commands to setup the bridge: ifconfig eth0 0.0.0.0 promiscuous ifconfig wlan0 0.0.0.0 promiscuous brctl addbr br0 brctl addif br0 eth0 brctl addif br0 wlan0 brctl sethello br0 1 brctl setmaxage br0 4 brctl setfd br0 4 ifconfig br0 up The eth0 is connected to a local network, and wlan0 is set to

Hi, Sorry,after i install bridging 1.4, even after i setup a new bridge to link between wlan0 & eth 0 but it seem lost after pc restart, i have to reset after restart. am i doing wrong in installation or ... Hope get some advice from u all (expert) ===== Ô¸ÄúÓÀÔ¶ÐÒ¸££¬¿ìÀֺͰ²Ïê Happy & Healthy Always ! ^_^ ! ¸öÈËÍøÒ³ Homepage:http://planet.time.net.my/sunwaycity/ceyong ¸öÈË·ðѧÍøÒ³

Hi guys, I have a problem with my Centos 6.4. I am experiencing a Wireless Disconnects, some time ago I had them constantly each 2-3minutes. After upgrading to new kernel (and other software from "Software Update" I am still exepriencing disconnects but every 10-15 minutes. It makes me angry because I am doing a lot of work with ftp servers. Card: *Atheros Communications Inc. AR9285

Hi, I have a laptop DELL M90 with an Intel PRO/Wireless 3945ABG card. I'm using centOS 5.1 kernel 2.6.18-53 i386. I installed ndiswrapper v 1.52 I installed the driver http://ftp.us.dell.com/network/R164255.EXE The wireless-tools is v 28.2 When I trying to connect to my wireless access point with encryption key disabled everything work fine !!!! When I enabled the encryption key on my

Hi, i am using bridge-utils-1.0.4 in my redhat 9.0 pc, even i configure my bridge called br0 which bridging wlan0 & eth0 but after computer restart, it disapprear, how can we statically set it. I did write configuration and save as ifcfg-br0 . Anyone can help, Thanks! ===== Happy and Healthy Always ! ^_^ ! My Homepage : http://planet.time.net.my/sunwaycity/ceyong My Buddhist Pages:

From: "Paul E. McKenney" <paulmck at linux.vnet.ibm.com> The sparse checking for rcu_assign_pointer() was recently upgraded to reject non-__kernel address spaces. This also rejects __rcu, which is almost always the right thing to do. However, the uses in cfg80211_combine_bsses() and cfg80211_bss_update() are legitimate: They is assigning a pointer to an element from an

Hi folks I have a CentOS box with 2 network cards. One is eth0 and the other is wlan0 (Linksys WUSB54GC USB wifi card) I use wlan0 to stay linked with other workstations in an small network and eth0 just in case I need to get wired to solve some problem. eth0 is always unpluged while things are going ok. Te problem is everytime my AP is turned off for whatever reason or the link is down, no

I just installed an Asus PCE-n13 wireless card into one of my CentOS 5.6 systems. It uses the RaLink 2680 chip set and I was able to get the driver loaded using modprobe rt2x00pci.ko. I saw no error and now see that the module is loaded along with mac80211 and other dependencies. Now I need to know how to create the wlan0 device. I can find nothing via Google searches on how to create that

I'm a problem with bridge please help me My configuration: eth0,eth1,wlan0 bridge is br0 on devices eth0 and wlan0. Device eth1 is not in bridge. br0 ip is 192.168.1.1 eth1 ip is 192.168.2.1 ethernet (eth0,eth1) is in one switch. all is ok if eth1 not in system, if eth1 plugged into system and up interfa= ce eth1 network crash :( thanx. -------------- next part -------------- An HTML

I'm trying to make a bridge with wireless cards. Any test with Realtek 8180 chipsets doesn't work at all... Could anybody tell me some card models that support bridging (using bridge-tools)?

Several weeks ago (July 1st), you may remember me asking about using a Linksys WET11 (ethernet to wireless bridge) with bridge-utils. Mark Mathews was kind enough to respond and described a situation he called "b/mcast echo". From his reply: " Because of the games that have to be played to build WLAN station bridge devices, some have a problem with what I call 'b/mcast

I am trying to get wireless working on CentOS 7.3 with intel wireless 3165 ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000 link/ether b8:ae:ed:77:b3:3a brd ff:ff:ff:ff:ff:ff 3: wlan0:

On Sun, 9 May 2004 17:57:58 -0700 (PDT) Matthew Tanase <tanase@qaddisin.com> wrote: > Hi > > I have a question for you - I know you probably get a lot but I figured I'd try. I've setup several bridges before using the code. Never had any problems. Recently I set Mandrake 10.0 up on a rackmount, with a builtin NIC and a 4 port ethernet card. Initially, I plugged 2 links