similar to: [Bridge] bridge stp problem

Hi, I was wondering if anyone had managed to get speex to run (nicely) on an IXP425 processor. The current version does not seem to have the necessary optimisations for the ARM v5te, just the v5 which has assembly optimisations not understood by this target. Failing that, does anyone know where I might get a reference for this model of processor? I have look on the Intel site, but I can't

Dear OpenSSH developers, I tried porting OpenSSH-4.3p2 to arm-linux (IXP425 Xscale platform) using openssl-0.9.8b and uClibc. This on the snapgear 3.2.0 distribution. It all compiles without problems, but when i run any openssh executable it will always show output similar to the following: # ssh sh: /usr/bin/ssh: No such file or directory # I checked for the libraries, they are all in /lib.

Hi All, Let me try again, this time with fixed width ! First off the scenario. We have a local and remote site, both of which connect to the internet via a wireless network. The wireless cards themselves have both an ethernet (ixp1) and an "Atheros" (ath0) interface. The devices connect via PPPoE, and so there is also a ppp0 interface on each device. On one side we have : IXP1 IP

Hi all, I ave setup a CentOS server to act as LAN gateway and also as a transparent proxy server but all client "passing through" that server are enable to send or recieve mails. The mail server is host on the same LAN running mdaemon, both servers are on private IP block(192.168.0.0/24). Am using cisco router to do port forwading for mailserver(25,110,143) ports. If i eliminate

Hello there ! I have successfully installed Asterisk on a normal server and on a Linksys WRT610N with DD-WRT running from connected USB-stick. This is not my first Asterisk-installation. I'm always finding a smaller and smaller platform to install Asterisk on. But now I encounter a problem. I'm using the same Grandstream GXP2010 with a of my installations. Every time registration goes

Hi, I have 3 Samba servers run Samba 2.0.7 on RH6.2, with Kernel 2.2.16-3. Everything seems to be OK, except that my Win9x clients cannot see other Win9x clients across the subnets. Each server has 2 n/w cards installed, with IP Forwading enabled etc. If the user knows the machine name, he can get access to the shared resources across all 3 subnets, but using the n/w neighbourhood browser, shows

Hi all, This is probably not the right place for this question, but maybe someone can help me out. I am trying to setup a VPN between two private addresses, using iproute2 (which is my only excuse for mailing this list). The setup is as below : eth0 ppp0 Wireless ppp0 eth0

Dear Samba Gurus, having a browsing problem with W2k (German Version) on my 2.0.9 server (also tried 2.0.7 before), you are my last hope to help me soling my problem! Everything is working fine accessing the samba server from linux, no problem at all, all shares are listet with exact namewith smbclient -L ixdp425 (Intel Xscale Developper Plattform ixp425 Proz.) I'm also able to "net

Hi all, we're buildin an Asterisk box based on an Intel IXP425 board. The board uses a Beronet BN2S0 ISDN card, mISDN 1.1.4 and asterisk 1.4.2. hfc_multi has been patched to compile under big endian cpu, and so also capi kernel files. All the modules seem to load correctly (configuration was made with misdn-init config), but when starting cha_misdn, asterisk outputs the following lines: P[ 1]

[sorry for my maybe newbie Qs and using this group for my busybox issue but though having visited some forums about this I'm getting nuts] I unslugged a Linksys NSLU2 device with V2.3R63-uNSLUng-6.8-beta as I plan to use it as a DC replacement for my W2k server at home. But I already got stuck before this. Following the unslinging I installed the Samba3 IPKGs for the NSLU guided by the hints

Hello everybody! I am having the following problem and since I am a beginner in playing with asterisk, i can't solve it: I am trying to integrate my existing H.323 network in real world telephony by ISDN cards. The problem is that i DON'T want to change all e164 numbers in my h.323 network and my ISDN provider doesn't accept those identities (CIDs). So, i have to spoof the outgoing

Hi, i have two asterisk@hotme 2.2 server. i want if one of my asterisk server down. other is taken control of my first server and call goes through. Is it possible in asterisk. Usman -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051216/7b0c169d/attachment.htm

I have successfully joined a domain with Samba 3.0.30 But after approx. one or two hours, winbind looses connection to the domain controller and users are not allowed to connect shares. After a 'killall winbindd' and restarting of winbind, the users can connect to the shares again. How can I work around this bug? Configuration looks like this: [global] dos charset = ISO-8859-1

Starting with version 3.0.31, it is not possible to access shares on a Windows Server 2000 SP4, even though it is possible to join the domain controlled by that Server. The same configuration worked "fine" (for one hour) with 3.0.30. What has changed? What do I need to configure or compile differently to get back to 3.0.2x behaviour? The commands #> wbinfo -u #> wbinfo -g #>

Hi all, I am having a problem while sycing file. An error is given as follows: "io timeout after 55 second - exiting". I have found this problem being posted in the mailing list previously. But after reading those mails, i understood that this problem occured only for files greater than 100M file size. But the file am trying to sync is of just 2MB. Let

Hi, I have an DNAT ISSUE with PREROUTING. This is my setup. I have 2 firewalls running iptables. Pls asume 1.2.3.4/29 is the internet interace of FIRST firewall. 2.3.4.5/29 is the internet interface of SECOND firewall. it has DMZ zone. in that DMZ zone, mail server runnig @ 192.168.100.3 Now I want to DNAT port 25 of FISRT firewall ( i.e - its ip address - 1.2.3.4/29) to the internet ip

I started my AD-member server with the DC not being present. Afterwards, I executed the "good practice" sequence from the howtos for testing a installation: "testparm ..." "nmblookup -d ..." "nmblookup -M ..." "nmblookup __SAMBA__ ..." "smbclient -L ..." And some domain tests: "net ads testjoin" "net ads lookup"

Hi!, I have Fedora 2 installed (Kernel 2.6), 3 interfaces (eth0,eth1,eth2), in the eth1 i have my local network and eth0 the Internet conection, when i do masquerading (eth1 out by eth0) only works for a few minutes. I dont know what i?m doing wrong, or only is an incompability or error between the OS Fedora 2 and the shorewall 2.0.7...i restart the shorewall service ones works anothers doesnt.

Hi, I have what I think is a relatively advanced question. Any help is appreciated, even if it's not a complete answer. I am using Asterisk in mostly realtime fashion, specifically SIP registrations are in a MySQL table. This works fine (mostly). I also set a few variables in the setvar column, like this: callerid_internal=test <710>;did=5555551234 Again, this works

I'm forwading your request to the wine-users mailing list. Someone there can help you. On Sun, 2001-10-28 at 14:11, Christos Michail wrote: > Helo from Athens Greece > > I got and compile wine on a suse 7.1 Linux (running Kernel 2.4) > The compilation and installation went straight forwrd without any problem > The applications run exept one thing When i try to use the network