similar to: [Bridge] bridge problem, please help me

I am having problem in ping or connect AP from Mobile Node(essid & channel is the same,maybe routing did not set properly but i fail to configure with route add default gw 192.168.3.4,its alway said network is unreachable ),My Mobile Node is using acx100 as driver while AP(redhat 9.0) is using HOSTAP 0.1.3.Any one can help? I heard How-To said we not need to set address on eth0 & wlan0

I'm trying to bridge a wired network and a wireless network, but I'm having some trouble. No traffic seems to be passing through the bridge. When I issue a "showmacs" command to brctl, I am able to see MAC addresses from both networks. I am also able to ping both networks from the bridge machine. When I issue a "showstp" command to brctl, the wireless access

ClarkConnect Home 3.2 eth0 - WAN - inet - ip:192.168.1.2 gw:192.168.1.1 (connected to my www.woosh.co.nz gatway) wlan - WAN - private community wireless networt - ip:10.252.16.16 gw:10.252.16.1 eth1 - LAN - ip:192.168.2.1 # route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.252.16.1 [root@bowenvale etc]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface

Hi All, After hours of reading and trials, I got the following setup working... 1. Dell Axim X30 PocketPC with 802.11b wireless using DHCP with Open WEP -- successfully connected to --> 2. Laptop with DLink Airplus DWL-650+ PCMCIA wireless with ndiswrapper v1.1 driver with network bridge (wired + wireless) and running a DHCP server listening on interface br0 (eth0 + wlan0) Here is the

I''m new on this mailing list, reading it for last 4 weeks, ... Need help please... I want to implement tc rules on br0 witch is build of wlan0, wlan0wds0, wlan0wds1? I did something but it doesn''t do good job, it doesn''t give constant flow ... any idea, please if someone already have experiance... OS: Suse 9.0 myshaper

Hi wondering if anyone can help. I have two NICs on a debian sarge based system and current running as a bridge (br0) which consists of eth0 and eth1. Is it possible to add a virtual interface to the eth1 so I can also do NAT on the box as well? I have tried many times and keep coming up with errors. Kind Regards William Bohannan

Hello, I want to add wireless capability to my Gentoo-linux based firewall/router at home, so I bought a Netgear MA311 PCI and installed the hostap package. I load the hostap_pci module and the wlan0 interface comes up fine. I can detect the signal from a wireless enabled laptop. Now I'm thinking I'm going to bridge the wlan0 interface and the eth1 interface, and run the firewall with br0

Hi, I added below code in /etc/rc.d/rc.local in order to load the bridge brctl addbr br0 brctl addif br0 eth0 brctl addif br0 wlan0 ifconfig br0 up but it fail, i found error in /var/log/message said localhost: modprobe: modprobe cannot locate br0 modules but i found it said suceedly up the br0 interface anyone know? ===== Ô¸ÄúÓÀÔ¶ÐÒ¸££¬¿ìÀֺͰ²Ïê Happy & Healthy Always ! ^_^ !

Hi, I had successfully setup my bridge (br0) but after few minutes the br0 interface seems not working. ifconfig eth0 0.0.0.0 ifconfig eth5 0.0.0.0 brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth5 brctl stp br0 on I check on my system's /var/log/syslog file. It shows something strange messages as below: - Jan 2 10:44:22 fw01 kernel: ipt_tcpmss_target: bad length (64 bytes)

Hello, I how an embedded processor that needs to act as a bridge between a wireless and wired network. I have managed to bring up the bridge fine. I can also bring up the bridge with a static ip address. However I can not figure out how to bring up the bridge with a dynamic ip address. Is it possible to for a bridge to get a dynamically assigned ip address? Oliver

Hello, I have the AR9285 wireless adaptor on an HP DV6-2128ca notebook. I can see it. it comes up in NetworkManager but never gets an IP. the router is a linksys using WPA/PSK security. Would/could someone please help me out trying to get this to work? Output of several commands follows: dmesg: ath: EEPROM regdomain: 0x69 ath: EEPROM indicates we should expect a direct regpair map ath:

Hi, Hi, I get an error with TC Simple. System: shorewall 4.5.6.2 kernel 3.5.3 iptables 1.4.13 xtables 1.45 iproute2 3.5.1 OS: gentoo/linux amd64 when shorewall executes this command: tc filter add dev eth0 protocol all prio 1 parent 1011: handle 1011 flow hash keys nfct-src divisor 1024 It fails with this error: RTNETLINK answers: No such file or directory We have an error

Hi, My wife and I live in a two-storey flat, and we have a small home LAN (100% CentOS 5) with a "classical" configuration: On the ground floor, there is the telephone jack with the DSL modem router (192.168.1.254). This modem has a mini-switch with two Ethernet jacks to it, and the two are used by: - the server (192.168.1.1), a "black box" running in a cupboard 24/7 -

Hi all, I'm trying out bridging for my wireless and wired LAN, so that they can both use my PPPoE connection. Here's the network structure, pretty easy: darjeeling (192.168.1.7) ringo (192.168.1.3) (mtu 1500) (mtu 1500) \ / \ wlan0 <--br0 (mtu 1500)--> eth1

Hi, my box is connected to 3 networks, eth0 eth1 wlan0. I want "my" traffic to go via wlan0 and everything from eth1 NATed to eth0: eth0 192.168.1.10/24 eth1 172.16.1.1/12 wlan0 192.168.10.190/24 I first tried this with two single hosts: iptables -A POSTROUTING -j MASQUERADE -o eth0 -t nat iptables -A POSTROUTING -j MASQUERADE -o wlan0 -t nat echo 200 Forw >>

I have an Everex laptop (ick, but it was super cheap) that has an Atheros wireless NIC in it, but I can't seem to get it to connect to my wireless in-home LAN. Here's what I've done so far (that isn't working) - any suggestions? [root at marktop mark]# lspci | grep Ether 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 05:01.0 Ethernet controller:

Hello good day to all ... this is my setup 1 Linux Wireless Access Point, connected are 4 wireless gateway in which i needed to apply shaping ... ok here is the weird part... clients on each gateway download files from the Acess Point ... a 500 mb file through ftp on gateway 1 which is up to 64 kbps ... the result is from 60-64 kbps speed which is fine ... on gateway 2 which is 128 kbps ... the

Hi there, I'm currently experiencing a minor problem using the bridge module under kernel 2.4.27 part of the Devil Linux distribution (http://www.devil-linux.org). The problem I am having is that when the bridge is unloaded during a reboot I receive the following errors in /var/log/messages: Nov 14 13:22:13 src@Devil kernel: unregister_netdevice: waiting for br0 to become free. Usage count =

Good day, My name is Mike and without further ado forgive me that I''ll go straight to the point. rtlsrc-2.4.29-2.diff this patch is obsoleted, but it would come in handy when trying to solve the IP collisions in networks. I have situation around here becouse I intend to connect through my wifi card to many gateways with same IP adresses - 192.168.0.1 with /24 mask - then

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm