similar to: [Bridge] large packet size doesn't work

> Use an Intel pro/100 or pro/1000 driver..they are known to > work with VLANs. > > I guess it's also possible that it's a problem in the > bridging code, so try the latest kernel > as well... I compiled the latest 2.6.19 kernel and tested it with two 3COM 3c905c fast ethernet interfaces which work fine with vlan 802.1q tagging, but when I have added the eth0 and eth1

Looks like the GSO is involved? I got this while running Dom0 only (no guests), with a BOINC/Rosetta@home application running on all 4 cores. changeset: 10649:8e55c5c11475 Build: x86_32p (pae). ------------[ cut here ]------------ kernel BUG at net/core/dev.c:1133! invalid opcode: 0000 [#1] SMP CPU: 0 EIP: 0061:[<c04dceb0>] Not tainted VLI EFLAGS: 00210297 (2.6.16.13-xen

Hi, I have just configured a Linux box with kernel 2.6.16.7 and configured two ethernet interfaces (with MTU 1500) in bridge mode. CONFIG_BRIDGE_NETFILTER is enabled. The problem is that ping -s 1500 192.168.0.2 doesn't work from 192.168.0.1 if the systems are separated by the bridge. Normal ping with smaller packet size works ok. What is wrong? Best Regards Fulvio Ricciardi

----- Original Message Follows ----- From: kasra kangavari <kasra_kng@yahoo.com> To: fulvio.ricciardi@zeroshell.net Subject: Re: [Bridge] Passing vlan tagged packets through linux bridge(2.6.19) Date: Sat, 2 Dec 2006 00:16:12 -0800 (PST) > Dear Fulvio > > I wanna know if your linux box ethernets are 1000 or 100 > ? > and are you sure about kernels < 2.6.15 that large

Hello, Due to a recent change in the bridge code, we now need a way of knowing if a packet has been defragmented. The bridge code now checks on the packet size and drops packets that are too big for the output port. Defragmented packets will get refragmented later, so they shouldn't be dropped. I've been reading the defragmentation code and can't find an easy way of knowing if a

Hi, I have 2 servers which are connected to a gateway machine. The gateway and one server are running Linux 2.6.16.2, while the third machine is running 2.6.16.5. The two ethernet ports on the gateway which are connected to the servers are combined into a single ethernet bridge device. Ever since 2.6.16, I have noticed that I can no longer cross-mount the two servers' /home directories via

Inspired from a similar patch posted on grub-devel for Grub2 I immersed myself into the code of Grub Legacy and came up with this absurdedly simple patch to allow syslinux or other bootloaders residing in logical partition to be chainloaded from GRUB Legacy (0.9x). Hoping it to be of help, regards Fulvio Scapin -------------- next part -------------- A non-text attachment was scrubbed... Name:

On Thu, May 18, 2023 at 07:08:47PM +0300, Nikolay Aleksandrov wrote: > On 18/05/2023 14:33, Ido Schimmel wrote: > > diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c > > index fc17b9fd93e6..d8ab5890cbe6 100644 > > --- a/net/bridge/br_input.c > > +++ b/net/bridge/br_input.c > > @@ -334,6 +334,7 @@ static rx_handler_result_t br_handle_frame(struct sk_buff

Hi, please Cc: all replies, I'm not subscribed I seem to have troubles with my Linux bridge (2.6.8-rc2), which is apparently not bridging UDP fragments (NFS) when passing packets through iptables, but I do not see in the iptables stats where the packets are dropped. Policies for INPUT, FORWARD, OUTPUT are all "ACCEPT", and I grepped for all REJECT and DROP rules in iptables -nvL,

The following series adds 2 new flags to bridge. One flag allows the user to control whether mac learning is performed on the interface or not. By default mac learning is on. The other flag allows the user to control whether unicast traffic is flooded (send without an fdb) to a given unicast port. Default is on. Changes since v4: - Implemented Stephen's suggestions. Changes since v2: -

I recently tried to install several distros on a usb stick, with the peculiarity of creating in it a GPT label rather than the usual dos label. Installed Grub2 using the parted bios_grub flag on a partition, I proceeded to copy several distros on the remaining partitions. Grub2 worked fine, chainloading syslinux on each of the partitions. Or rather it worked all fine until I reached the fifth

Hi all. I'm experiencing long connect delays due to password file locking errors. For each connection samba logs the following errors: do_pw_lock: failed to lock SMB passwd file. mod_smbpwd_entry: unable to lock file /usr/local/samba-1.9.18p10/private/smbpasswd In the archives I found some other messages reporting the problem (on May this year), but no solution. Did I

Hello everyone, I know that to calculate the linear regression between x and y I have to use the function "lm". But how to do if x and y have a standard deviation like in the following example? How to compute the chi square test in this case? Thank you, Fulvio. example: x +- dx 5 2 13 4 17 4 23 6 y +- dy 6.3 0.6 9.2 0.9 14 1 21 4

Hello , just a simple question from a beginner: I write the function: plotsinx <- function() { x<-seq(0,2*pi,0.01) sinx<-sin(x) plot(sinx) } I recall it: plotsinx() and the plot works properly. but then in the workspace if I want to look at the values of sinx the following error is displayed: Error: Object "sinx" not found. How to save the variables created by the function on

Hi, I see you all agree to apply :) Stephen, repost of this patch to proper places below. Thank you Henrik for clarification of bridge standard. However, silent drop of locally generated packets on 99% idle carrier grade machine looks like a hardware problem. David, don't you think that having software packet drop counters is a bad idea? I thought, software drop counters are there to help

Hi, The attached patches enables the bridge to filter and forward packets according to their IEEE 802.1q headers. The goals behind this change include : - Enable running STP on 802.1q tagged networks. STP packets must be untagged. It isn't obvious how else to enable STP with the current bridge and vlan code. - Add native support for an untagged vlan. Currently an untagged vlan can

Dear all, I have 2 variables, x<-c(1,2,3,4,5,6,7,8,9,10) y<-c(1.3,2.5,4.6,5.3,5.9,6.7,7.4,8.5,9.4,10.4) each point of the y variable has an error: erry<-(0.2,0.3,0.2,0.1,0.4,0.2,0.3,0.4,0.3,0.2) how to plot(x,y) with the errors segments? Thank you, Copex --------------------------------- [[alternative HTML version deleted]]

Hello, I have a simple question for you: making: mylm<-lm(y~x) summary(mylm) I get the following results: ****************************************************** Coefficients: Estimate Std. Error t value Pr(>|t|) (Intercept) 16.54087 0.19952 82.91 <2e-16 *** x[1:19] -2.32337 0.04251 -54.66 <2e-16 *** ******************************************************

Hello, I created a simple histogram with: myHist<-hist(myData) the object myHist now has two arrays (among the others): myHist$mids myHist$counts Since myHist$counts contains some "0", and I want to calculate the linear fit among myHist$mids and log(myHist$counts), I want remove the elements of both arrays where these "0" occurs. which are the possible solutions to

Fulvio.Corno@polito.it wrote: > > I found the (possible) source of the error, in smbpass.c line 620+ .... > > If no entry is found, the procedure returns without releasing the lock. > I modified the last statement as: > > if (!found_entry) /* line 707 */ > { > fclose(fp); > pw_file_unlock(lockfd); >