similar to: [Bridge] bridge and transparent squid proxy

I suppose a few questions pop up on this list about access Samba through a firewall. ?I have been very successful running Samba through a firewall, until today. ?I hit a stumbling block. I have a Linux Firewall with the public IP Address of 134.x.x.140 <it is not the exact ip address, but close>. ?I am using NAT and port forwarding to send traffic destined for 137, 138,139, and 445 for BOTH

I'm trying to connect a sip call from sipgate to Asterisk A to Asterisk B. Both are behind NAT, but port forwarded. I get the connection, but no voice - either in or out. I can call on SIP from A to B (and from B to A). Do it all the time. Asterisk A receives SIP calls from Junction and Teliax. CLI on A looks right: == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 ==

Am 11.03.2018 um 11:53 schrieb Nicolas Kovacs <info at microlinux.fr>: > > I've experimented some more, and I have a partial success. Here, I'm > redirecting all HTTPS traffic *except* the one that goes to my bank: > > iptables -A PREROUTING -t nat -i $IFACE_LAN -p tcp ! -d > www.credit-cooperatif.coop --dport 443 -j REDIRECT --to-port 3129 > > This works

Hi I have been using Shorewall for a while now and find it very useful and easy to configure, I am learning iptables and having trouble getting the bridge to successfully work with squid, although I get it working with Shorewall straight away? Does anyone know the rules to successfully use squid with a transparent bridge? Internet – router - (bridge eth0 – eth1) – local lan auto lo iface lo

Hi, I just setup a very basic HTTP proxy with Squid on a router running CentOS 7. Up until early 2020 I've been using a bone-headed shell script with iptables to configure my firewall. But I decided to follow advice from a few gurus on this list, and I've since moved my configurations to FirewallD, which works nicely. There's one configuration left to tackle, that's port

Hi all, I need a little help, i am studing htb to control user bandwidth (download/upload) and I made a script as below to test. I am testing using ttcp tool from by linux box to other linux (192.168.200.51). my box <---- Linux = more than 128kbit mybot -----> Linux = get 128kbit But I want to control both ways, what am I missing? script: EXTIF=eth0 INTIF=eth1 TC=/sbin/tc DOWN=128

Hello. I'm moving from a very old Fedora Core 1 to CentOS 4.4, what a change!! Three year ago, I wrote some script (network related) and worked very well. Now, I can put into init.d by means of chkconfig and I restarted the system, but always hang when executing my srcipt (in my new centos 4.4). There a manual for making scripts for init.d? there is some new requirement by which it does not

ei tuka imam edin pf conf obache pravi mnogo nomera, kato se pusne parvoto koeto e dropva paketi, timeoutva po serverite i t.n.. i speed-a e mnogo baven, vijte ako nqkoi moje da otkrie generalna greshka da reply :) vapreki che ne e freebsd-specific :P ne sym go pisal az a i ne sam mnogo mnogo zapoznat s pf zatova ako nqkoi moje da pomogne e dobre doshyl :) btw moje i neshto ot tia opcii kato set

Hi, I am trying to setup a shaper for my linux box and I am experiencing some problems. What I am trying to do is priorizing packets on the egress link, therefore I have setup some prio classes etc. The priorizing seem to work but the problem is that the ceil parameter doesnt seem to work on non leafs. This is what stats show: > class htb 1:1 root rate 3000bit ceil 3000bit burst 1602b/8 mpu

Hello ! I have installed and configured squid(last version) transparent proxy and i am using shorewall(last version) as a firewall. I have redirected all of my local network''s http requests to the squid port(3128). But, from my local net i cannot ping a remote machine on the internet using his hostname like google.com. I could do it only when i use a ip address. All of computers in the

I have a little home network with one Windows 98 PC and a pc running linux. My idea is that as soon as DSL is finally made available to my area (which I keep getting told will be real soon now) I want to route it through the linux box and up to the Windows PC, using IP masquerading, etc. At present I have samba enabled on the unix box which opens up several worthwhile conveniences to me:

Hi, I'm currently facing a quite tricky problem. Here goes. I have setup Squid as a transparent HTTP+HTTPS proxy in my local network. All web traffic gets handed over to Squid by an iptables script on the server. Here's the relevant section in /etc/squid/squid.conf: --8<------------------------------------------------------------- # Ports du proxy http_port 3130 http_port 3128

Greetings, I installed a squid 3.1.10.i686 squid to a centos 6.2i686. The proxy is working fine with the default config. After I decided to use it as a transparent proxy, I added two lines to config: http_proxy 10.0.5.1:3128 transparent, always_direct allow all http_port 10.0.5.1:3128 transparent # # Recommended minimum configuration: # acl manager proto cache_object #acl localhost src

Are you saying that REDIRECT hasn't been or that it has suddenly stopped working? My guess would be that it hasn't been working. Here's why: The REDIRECT target is in the NAT table because it is designed to redirect the port of packets destined for the interface they arrived on. If I understand right your situation is like this: (Users) -----> (eth2) <Bridge (192.168.0.3)>

hey friends, I am trying to configure Squid Transparent Proxy on Centos4.0. The eth0 is connected to the Internet and eth1 is for the LAN connection I am testing this scenario with 2 machines one machine (Centos4.0 ) on which squid is running and other machine which is debian is on the network 192.168.2.0. Centos4.0 eth0: 192.168.1.125/24 eth1: 192.168.2.126/24 Debian: eth0:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I mean http://users.gurulink.com/drk/transproxy/TransparentProxy.html on "6. Transparent Proxy to a Remote Box." Thanks - -------- Original Message -------- Subject: Squid on remote Box Date: Wed, 16 Mar 2005 17:16:35 +0700 From: Royke K <royke4k@cbn.net.id> To: shorewall-users@lists.shorewall.net How do I configure port

Hi! I have some problem in my asterisk 1.4.2, I've installed it on centOS 5.2 and this didn't accept voip QoS and can't route the packets having voip QoS. So I should change voip packets to be routing with centOS. I want to use iproute2 but i don't what to do after installing iproute2. Anyone could help me please? -------------- next part -------------- An HTML attachment was

Hello, I am trying to get LDAP running. So far, the server is running but I cannot connect to port 389 or the server using webmin or phpldapadmin. It could be my ISP has blocked this port but I'm not sure. I have tried to telnet to port 389 but it is refused. All other services run fine. I user the iptables ruleset found in the IP-Masquerade HowTo. Below is the ruleset I follow for

Hello! I''ve put some questions on this list some weeks ago and I''ve got good answers. Thank you! Now I''ve finished my (beautyful) script and I ran it on my router... About my script: It routes packages based on their destination on the Internet. I have about 1650 preffered destination networks listed in some file. The script read this file and marks every package for

I remember to see something about that in shorewall.net some time ago, but I could not find it today ... The case : Debian Etch, Shorewall 3.2.6, squid3 and Apache 2 . The first 3 where already running fine for some time ... Now I need to setup an Apache server to allow some web mannagement, things like PHPsysinfo, phppgadmin, just for internal net, no web access . but port 80 is redirected to