similar to: [Bridge] Trouble with ARP traffic

dear all: I try to configure a bridge in my embedded linux. I had fininshed these operations below: 1) configure kernel, select the option "802.1d bridge" 2) compile bridge-utils 3) issue these commands: ifconfig eth0 0.0.0.0 ifconfig eth1 0.0.0.0 brctl addbr vb brctl addif vb eth0 brctl addif vb eth1 ifconfig vb 192.168.110.24 up

Hi, the networking just drives me crazy and it seems that i am missing something. So here is my situation: i have a server with 2 public IPs (85.214.1.230 and 81.169.1.81) the dom0 is on: ip 81.169.1.81 netmask 255.255.255.255 gw 81.169.1.1 i would like to have a domU with ip 85.214.1.230. I tried everything routing, bridging.. nothing seems to work. my dom0 config; . (network-script

hi everyone, so,first it seemed a trivial question to me, but since I could not find anybody being neither able to answer this question nor giving a short config example. after a few sleepless nights and exhausting all the reading and research. here I am sharing my problem with all of you, in the hope of some possible solution/sugestion. or is it that this is impossible?? below my

Here is the scenario: I have one server with kernel 2.4.24 with a bridge br0 made of 2 interfaces, eth0 and tap0 (the last is an OpenVPN tunnel), and one remote computer connetting through tap0. If I assign a static IP to the remote computer, the bridge works perfecly (so I think the problem is not OpenVPN-related). If I start a DHCPd on the server and I configure the remote client to get the

Hi, I had successfully setup my bridge (br0) but after few minutes the br0 interface seems not working. ifconfig eth0 0.0.0.0 ifconfig eth5 0.0.0.0 brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth5 brctl stp br0 on I check on my system's /var/log/syslog file. It shows something strange messages as below: - Jan 2 10:44:22 fw01 kernel: ipt_tcpmss_target: bad length (64 bytes)

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a machine running 2.6.18-rc3 with a bridge config that looks like this: cr1:~# brctl show bridge name bridge id STP enabled interfaces vlan100 36b0.0007e90f40c1 yes eth0.100 eth2.100 vlan101 5dc0.0007e90f40c1 yes

Hi list When I create a domU the network isn''t reachable when it''s loaded. Only if I do a xm console domUname and do some sort of network activity like pinging an outside host or traceroute. First then there''s network connection from the outside to services like webserver etc. What can cause this? I''m using Xen 2.0.5 stable domU from binary dist and

hi: my box use eth0 connect my pc. but I type command "./brctl showmacs br0", no mac addr display and the" brctl showmacs program" not exit,always exec # ./brctl show bridge name bridge id STP enabled interfaces br0 8000.000123456789 no eth0 hdlc0 # ./brctl showmacs br0

Hi, I tried already a long time to enable network in my domU but I always fail with: # ifconfig eth0 192.168.0.1 up SIOCSIFADDR: No such device SIOCGIFFLAGS: No such device Do I need to load a kernel module? I use OpenSuse 10.2 with kernel 2.6.18.8-0.5-xen (for both domU and dom0). My config: kernel = "/boot/vmlinuz-xen" ramdisk = "/home/jens/initrd.gz" memory = 1024 name

Hi, I am a beginner of bridge. I have a problem of using Fedora Core 2 to make a simple bridge. Here is my setup: The bridge computer is installed with Fedore Core 2 (with the SE Linux patch). As I know that kernel 2.6.5 is already support bridging by default, so I didn't recompile the kernel. Then I installed bridge-utils-0.9.6-1.i386. And no additional configuration is made. After

So, I'm setting up my first bridge, and I'm running into an interesting issue. I have a 4 port NIC (formerly 4 seperate /29 and /28 LANs) and an onboard NIC (to my ISP). I've setup the bridge using the script included at the bottom of this email (modified from Gentoo for Aurora). When the WET11 (the WET11 is a simple ethernet to wireless bridge) is unplugged, the bridge works

Hi, I'm trying to build a bridge using a 486DX2/66 with two 10 Mbit Ethernet NICs. The machine (tsushima) is running Debian stable and kernel 2.4.26. Previously I used it as a router, so I know the hardware (NICs) is working. The NICs are as follows: eth0: WD80x3 at 0x280, 00 00 C0 0A 2C 2F WD8003-old, IRQ 10, shared memory at 0xd0000-0xd1fff. eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala

Hi, I will try to explain my case, I hope this is rigth place to do it. My goal is migrate an Ubuntu 9.10 64bit VMWare VM from a Win2k8 64bit server to an Ubuntu 9.10 64bit server. Following some tutorials I've got a .qcow2 file from .vmdk and a .xml file from .vmx file Running virsh define/start all was fine, but VM is unaccessible: no ping, no ssh, also from hosting server. This is

Hi Is there a way to either: Find the real ifindex/ifname a mac-address is bound to or Find the real ifindex/ifname of an incoming packet ? I am writing a dhcp server and need to know what real interface the dhcp re= quest packet came from. An acceptable solution would be to get the interfac= e by the mac-address, but that can be faked so I would rather get the inter= face by knowing where the

Hi there, I'm trying to set up a man-in-the-middle scenario within a VMWare Workstation team, using brctl. What I want is the following: PC1 eth0 >---LAN-segment-1---< eth0 PCMITM eth1 >---LAN-segment-2---< eth0 PC2 Now I did the following on PCMITM (PC man in the middle): ifconfig eth0 down ifconfig eth1 down brctl addbr lnxbr0 brctl addif lnxbr0 eth0 brctl addif lnxbr0 eth1

Hi all, I would like to understand the meaning of "Stale mailbox lock file detected" In index-storage.c (https://mis.dopa.go.th/atmail/server_source/dovecot/src/lib-storage/index/index-storage.c) there is this notice "Stale mailbox lock file detected" ... I have a java application which connects via javamail to a dovecot server and I have some anomalies when that message

<font face="Default Sans Serif,Verdana,Arial,Helvetica,sans-serif" size="2"> <div>Thanks Aki,</div><div><br></div><div>do you know if this list is read by dovecot developers team too? Could you point me to the right list otherwise?</div> <div><br><br>Raffaele

<font face="Default Sans Serif,Verdana,Arial,Helvetica,sans-serif" size="2"> <div style="font-family: Verdana, Arial, Helvetica, sans-serif;">So you don't know when this piece of code is executed:</div> <div style="font-family: Verdana, Arial, Helvetica, sans-serif;"><br></div> <div style=""><pre

Hello, I've been trying to implement a bridge in place for a clustered firewall at one of our office locations. Currently we NAT two class C's internally. We decided, for performance reasons, that it would make sense to put our servers into an official DMZ. So we started this bridging project. Our goal is to have two redundant firewalls in place. There is no need for active/active.

Hi, i added a native (client) Socks V4/V5 support inside FreeBSD libc library. The work is based of my project (see http://csocks.altervista.org) CSOCKS. You can get it here: http://csocks.altervista.org/download/FreeBSD_libc.tar.gz CHANGES: I changed the file: /usr/src/lib/libc/Makefile I added the Directory: /usr/src/lib/libc/socks They contains the files: