similar to: [Bridge] new gretap, bridging and mtu

Hi all, I am trying to setup a configuration of Tinc to allow multiple tincd daemons for a same network (mixing bonding, etc...). I will post my solution later if I found one. This is to get better speeds in multiple gigabit/sec networks. So my question is not about this directly. I would like to know if the "netname" configured on each node, is used somewhere in communications

I'm trying to bridge a mix of 802.1q tagged and untagged Ethernet frames through the new Ethernet over GRE functionality in kernel 2.6.28 The hosts handling the tunnel (192.168.200.6, 192.168.200.2) are connected together through with a simple cross cable through their eth1 interface. The switches are connected to their respective eth0 interface, which is bridged with their respective gretap

Hi all, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090722/30afa9ee/attachment.htm

Hi, I have multiple ppp interfaces that does not correspond to the same network usage. Do you know anything about trying to set definitively the ppp+ name ? or anything to adapt automagically iptables to the real network which is behind each ppp+ interface ? I''ve tooken a look into the IFNAME env var... but it doesn''t seems to work :c/ regards, -- BeTa

I am hoping that someone with more experience and knowledge than I can assist me in finding a solution ;) We have a RedHat AS4 box with 5 interfaces. Two interfaces serve two different networks and two interfaces connect to two different uplinks. The fifth interface is our management interface. Since a picture is worth a thousand words I attempted to come up with a diagram:

topology : two guest connected to physical LAN (vlan 620 and vlan 621) on host : 1) creating bridge br0 2) creating bridge for guest 1 and guest 2 - to separate traffic 3) virtual network1 : I have default NAT 192.168.122.x DHCP feeding IP to eth1 4) virtual network2 : I want to use 192.168.0.0 for eth0 my question is what would be my virtual network2 looks like : following is default xml :

On 09/04/2016 05:00 PM, Ulf Volmer wrote: >> IPADDR2=192.168.1.10 >> BROADCAST2=192.168.1.255 <-- >> NETMASK2=255.255.255.0 >> NETWORK2=192.168.1.0 <-- >> GATEWAY2=192.168.1.1 <-- >> >> in case they don't match the first IP address? > > I'm not sure at this point. If you have to add a second ip in another > different network

Dear all, i have a query about the related subject. As per stated, i have created the filter rules using handle selector for packet shaping purpose of ssh , www, etc. its working nicely.Again i want to this rule to work as global for the two different network. If i was not wrong , i have created the rules as tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src

I need to be able to set up several server settings (DNS/Zabbix/etc) based on the network that a server is connected to. Could someone show me a straight forward way of doing this? if generate supported pipes I might be able to swing this but apparently I need some help. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google

On 04.09.2016 15:18, Ulf Volmer wrote: > On 09/03/2016 07:34 PM, Walter H. wrote: > >> if I would need an additional IPv6 address I'd just add >> IPV6ADDR_SECONDARIES="ipv6addr" >> to this file; if I would need an additional IPv4 address this works only >> by a virtual device >> e.g. eth0:1 like this: > That's not true, you can add ipv4

Hi List; I am using Firefly softphone Version 1.9.9 Build 4521 and I select IAX protocol and did the configuration in Network1 (and I checked the Active checkbox) as following: Server: 192.168.8.4 username: iax2user1 password: password In the Asterisk, I did the following configuration on the /etc/asterisk/iax.conf: [iax2user1] type=friend context=internal username=iax2user1 secret=password

https://bugzilla.netfilter.org/show_bug.cgi?id=592 Phil Oester <netfilter at linuxace.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED CC| |netfilter at linuxace.com Resolution|

Hí everybody, you have a nice day. I am configuring accounting in shorewall /etc/shorewall/accounting and the traffic between eth0 (local network)1, eth2(local network2) and eth3(local network3) &lt;--&gt; eth1(ip public network), works fine. I make the accounting because y want to control the remote vpn access(pptpd) throught shorewall. Which is the way to control vpn /ip/access in

Hello List, I have a special L2 VPN connected samba deployment setup and I want to make sure the name resolution arrangement is the best for the network. Setup : network 1 + Samba1<<SAME IP range>> <L2 VPN> network2 <<SAME IP range>> + Samba2 I have noticed that the wins server and wins support options are non-inclusive. Samba2: name resolve order =

Hi all, I have a firewall central which a control the download/upload bandwidth with cbq of 9 differents networks. Now i need some help from you. I would like to use mrtg+snmp to reports these bandwidth to show per ip, how? any idea? tips? Thanks in advance, Anderson __________________________________________________________________________ Acabe com aquelas janelinhas que pulam na sua

I'm a bit confused how scp works... could someone please explain the local/remote external calls that happen when scp is started... in particular how it relates to ssh on the remote site? To be more specific... I use Kerberos for authentication and I've been working on an ssh wrapper script that checks my Kerberos credentials before running the ssh command. If the credentials are

--delete option is not working for me. The following is a minimal example. $ mkdir box1 box2 $ touch box1/letter box2/extra $ rsync -a -vv box1/ box2/ sending incremental file list delta-transmission disabled for local transfer or --whole-file letter total: matches=0 hash_hits=0 false_alarms=0 data=0 sent 92 bytes received 34 bytes 252.00 bytes/sec total size is 0 speedup is 0.00 $ tree

Hi. My goal is to use rsync to syncronize box1 and box2. On box2, I have a tapedrive which I write the data I syncronize from box1 every night. On box1, my /etc/rsyncd.conf looks like this: root@box1# cat /etc/rsyncd.conf max connections = 1 syslog facility = local6 [tmp] path = /tmp read only = yes comment = export of /tmp hosts allow = box2 auth users

Hello everybody and Timo. I have the next problem. With LDAP tree like ou=mail | - dc=example1.com,ou=Mail | - mail=box1 at example1.com,dc=example1.com,ou=Mail | - mail=box2 at example1.com,dc=example1.com,ou=Mail ? | - dc=example2.com,ou=Mail | - mail=box1 at example2.com,dc=example2.com,ou=Mail | - mail=box2 at example2.com,dc=example2.com,ou=Mail ? and settings in dovecot

Hi, I get this message on the latest Debian potato for i386. --> ssh -f localhost xterm sb at localhost's password: --> xterm Xt error: Can't open display: That happens also when connecting to another linux box: --> ssh -f box2 /usr/X11R6/bin/xterm --> /usr/X11R6/bin/xterm Xt error: Can't open display: The $DISPLAY is :0.0 for box1 undefined for box2 after