similar to: xfrd: failed reading tcp Operation now in progress

Hello! I use NSD 4.7.0 self compiled: Configure line: --build=x86_64-linux-gnu --prefix=/usr --includedir=${prefix}/include --mandir=${prefix}/share/man --infodir=${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=${prefix}/lib/x86_64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking

Hello, NSD 4.8.0 running on FreeBSD 13.2-RELEASE-p9 and serving both plain and DNSSEC signed zones. I noticed Permission denied errors in the logs for all domains listed in nsd.conf: [2024-01-12 12:20:05.710] nsd[8655]: info: writing zone domain-plain.org to file domain-plain.org [2024-01-12 12:20:05.710] nsd[8655]: error: cannot write zone domain-plain.org file domain-plain.org~: Permission

On Sat, 28 Dec 2019 17:02:09 +0100 richard lucassen via nsd-users <nsd-users at lists.nlnetlabs.nl> wrote: > The problem is (was) that I used "include:" statements in nsd.conf > to load zone information. Apparently nsd does not reread the include > files upon a SIGHUP. I scripted everything into 1 file and a HUP > rereads the zone info now. Wrong, I made a mistake it

Hello NSD developers, The new release candidate of NSD, with the new prometheus metrics feature, got me thinking about NSD's feature set, and how so many of its features have to be enabled at compile time. The result of of this is that NSD packages on various operating systems behave differently. I would like to propose that you adjust the build process to compile in *all* the features of

Hi, I'm new to NSD and would really appreciate if someone can point me to the right direction. I have like 8 NSD servers (secondary) serving around 30,000 zones. Zone updates are transferred from the primary DNS servers by AXFR/IXFR. The 8 NSD servers do not save the zones file on disk but are only held in memory. Therefore after NSD service is restarted zone transfer requests are being

Hi Andreas, The suggestions I captured in GitHub issues. Thanks for sharing. Regarding whether notifies are still plain UDP. Yes, the config parser doesn't accept additional arguments to "notify" and judging by the xfrd code anything to do with notify is using UDP, so no TLS yet. I've added a GitHub issue for this too. Thanks for the suggestions. They make for nice

Am 23.07.24 um 17:28 schrieb Jeroen Koekkoek via nsd-users: > NSD 4.10.1rc2 pre-release is available: no compile time warnings while building on debian bookworm/x86_64 > @bilias implemented mutual TLS authentication for zone transfers. > Please consult the nsd.conf manual for details on the newly introduced > configuration options tls-auth-port and tls-auth-xfr-only. this is an nice

On 04/12/2023 13:47, Jean-Christophe Boggio via nsd-users wrote: Hi Jean-Christophe, > When syncing between master and slaves, am I supposed to see new files > appear in the slave's "zonesdir" directory? Because, as you might > expect, I see nothing here. Is this behavior normal? From what I > understand, the slave "caches" the data in /var/lib/nsd/nsd.db

Hi list, We are observing strange behavior of nsd v3.2.9 acting as slave DNS server. The environment is set up as follows: 0. We are using 172.16.0.0/16 subnet; 1. Primary Master server at 172.16.100.114; 2. Slave server at 172.16.100.115. The config file is in /etc/nsd-dns-slave.conf; 3. There may be also other Master servers im the given subnet. Now I want to permit DNS NOTIFY messages to

Hello, I am switching from djbdns and have a (probably dumb) question before going live with nsd: When syncing between master and slaves, am I supposed to see new files appear in the slave's "zonesdir" directory? Because, as you might expect, I see nothing here. Is this behavior normal? From what I understand, the slave "caches" the data in /var/lib/nsd/nsd.db

Hi Jean Claude, The message is printed when the bind operation failed. Why that happens is hard to say, I'd need more information for that. As the message does not say: address already in use (or similar), I'm guessing the address is not configured? Best regards, Jeroen On Fri, 2023-04-21 at 18:03 +0200, HAKIZIMANA Jean Claude via nsd-users wrote: > Dear nsd Users, > kindly can

Hi Jean-Christophe, Anand's answer is entirely correct. Once 4.8.0 is released, zone files will be written once per hour by default. Best regards, Jeroen On Tue, 2023-12-05 at 10:48 +0100, Anand Buddhdev via nsd-users wrote: > On 04/12/2023 13:47, Jean-Christophe Boggio via nsd-users wrote: > > Hi Jean-Christophe, > > > When syncing between master and slaves, am I

Hi all, I'm running NSD 4.9.1 on OpenBSD 7.6. I recently upgraded from OpenBSD 7.5, which I believe had NSD 4.8.0 in base, and did not see this behavior prior. When I try to reload a zone using nsd-control, I am seeing an error message in my logfile: "error: reload: old-main quit during quit sync" This error does not appear to happen every time I run reload, but it does get

Hello, It seems our NSD secondary has triggered some sort of intermittent bug After several weeks/months of running nsd stops forking with the new zone data. A manual nsd-control transfer or even nsd-control force_transfer won?t work, only restart of nsd solves the problem. The only ?hint? I?ve found is that the nsd xfrd messages stops appearing in the logs (while the notify messages keeps

Dear all, NSD 4.12.0rc1 pre-release is available: https://nlnetlabs.nl/downloads/nsd/nsd-4.12.0rc1.tar.gz sha256 b9085a3fd08b8318ac30715faf1c7698099781eb3520253774a46f74386342e9 pgp https://nlnetlabs.nl/downloads/nsd/nsd-4.12.0rc1.tar.gz.asc This release introduces Prometheus metrics that can be compiled with `--enable-prometheus-metrics` and configured with `enable-metrics` (see

hi, On 2024-12-27 22:32, Fredrik Pettai via nsd-users wrote: > Hello, > > It seems our NSD secondary has triggered some sort of intermittent bug > After several weeks/months of running nsd stops forking with the new > zone data. > > A manual nsd-control transfer or even nsd-control force_transfer won?t > work, only restart of nsd solves the problem. > The only

Dear nsd Users, kindly can you help me to trace the cause of this error in nsd " nsd[25372]: warning: xfrd: could not bind source address:port to socket: Cannot assign requested address". I use NSD version 4.0.1 Thank you, -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello World, I am trying to build NSD4 on Debian Squeeze and I get the following errors when running `make`. ``` $ pwd /home/wiz/src/nsd/tags/NSD_4_0_0_imp_5 $ make [... output omitted ...] gcc -g -O2 -o nsd-checkconf answer.o axfr.o buffer.o configlexer.o configparse acket.o query.o rbtree.o radtree.o rdata.o region-allocator.o tsig.o tsig-opens 4_pton.o b64_ntop.o -lcrypto configparser.o: In

Hi Peter, NSD processes updates in batches. xfrd receives the [AI]XFR and schedules a reload for the main process, which in turn forks new serve children. The served-serial is updated after main reports success, the commit-serial (update written to disk) is updated before the reload (to explain the serials). The difference in timestamp can be explained by the fact that NSD looks up if the serial

Hi Jeroen, I just realised that the version I use is very old -- 4.1. So first what I should do -- updating it and only then come here , asking for clarification. ??, 27 ????. 2024??. ? 14:19, Jeroen Koekkoek <jeroen at nlnetlabs.nl>: > Hi Peter, > > NSD processes updates in batches. xfrd receives the [AI]XFR and > schedules a reload for the main process, which in turn forks