similar to: [Bridge] bridge is not forwarding the packet

Hi All, I am using Linux 2.6.15 kernel. I want to create 4094 bridge interface but I am able to see only 32 bridge interfaces with the help of "brctl show". I am able see other interfaces into /proc/net/dev but brctl is not showing more then 32. It is also not allowing any operations (add/del) over those interfaces. Is it correct behaviour or I have do some changes in some settings.?

Hi, Question on setting up networking in xen. I want to do the following on my laptop: dom0 is attached to eth0 and ath0. dom1 is going to by my virtual firewall for all my virtual machines. So I assume 3 interfaces, a bridge to eth0, ath0 and a virtual interface? dom2 and so on will route all their traffic through dom1 (through the virtual interface) I''ve read the documentation a

Hello. I''m running linux box with Slackware 9.1 and compiled kernel 2.4.31 with "yes" to VLANs and "yes" to all QoS. On this box i have more ethernet interfaces: eth0 eth1 eth2 and so as more vlan interfaces: eth0.100 eth1.3 eth1.4 This is entrace(uplink) router to our whole network and my goal is to shape users on this machine. I want for this purpose use HTB so

Hi Sam, do you know if there is anything done about cbb(4)? I have many wireless adapters with ath(4), but only the one based on PCMCIA is making problems on FreeBSD. I cannot boot my notebook with the device inserted into the port, or it will render the system unusable (100% load on cbb(4)). And all I can see is the following: Jul 12 14:58:39 link kernel: ath0: ath_chan_set: unable to reset

I am wanting to verify that I am properly using the MASQ for a series of hosts. I have 2 providers, and my providers file has the contents: #NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS COPY l3 1 100 main eth0.100 1.18.139.1 track,loose,fallback eth1 ws 2 200 main eth0.101 1.155.136.193

Hi, after some time without FreeBSD I installed 7.1 on an IBM Thinkpad T30 (with ZFS root on encrypted geli, works great). Config is: FreeBSD hasking.alashan.nongo 7.1-STABLE FreeBSD 7.1-STABLE #3: Thu Feb 5 21:10:45 CET 2009 root@hasking.alashan.nongo:/usr/obj/usr/src/sys/HASKING i386 I tried using my ath based D-Link DWL G650, which still seems to have some issues in regard to interrupt

Hi, I am using netem to add loss and then adding another qdisc within netem according to the wiki. Then i want to change the netem drop probability without having to delete the qdisc and recreate it. I try it but I get invalid argument: thorium-ini hedpe # tc qdisc add dev ath0 root handle 1:0 netem drop 1% thorium-ini hedpe # tc qdisc add dev ath0 parent 1:1 handle 10: xcp capacity 54Mbit

Hi, I want to add 2 vlans by the following steps: 1. add the vlan interfaces: vconfig add eth0 100 --vlan100 vconfig add eth0 101 --vlan101 2. modify the network-bridge script by the websit, http://wiki.xensource.com/xenwiki/XenNetworking#head-04ebcc1760dbc4678e83b116afa310dc0612dc39 Comment each time ifup or ifdown commands are executed.The reason is that ifdown ends with

So, with the updated HAL, I'm now able to negotiate an IP address via DHCP over the WLAN. Huzzah! But I've got two questions (now that I can use the card): ath(4) doesn't contain a list of media nor mediaopt settings that can be used. Some are detailed down in EXAMPLES, but there's no comprehensive list. (As well, and this is minor, the speeds are explicitly listed for 802.11a

I rebuilt my notebook that has the atheros card in it, and forgot to save all of my setup to get it working. I am using dkms and the madwifi rpms from rpmforge. My modprobe.conf has a line: alias wifi0 ath_pci I can ifconfig wifi0 up But the command: /usr/sbin/wpa_supplicant wpa_supplicant -dd -D madwifi -i wifi0 -c /etc/wpa_supplicant/wpa_supplicant.conf fails. Now some of my old

NetworkManager used to work fine for me but during the last few installations its a big hurdle in the wireless connectivity. I'm using Madwifi and its interface is correctly listed and working but I cannot connect to any wifi AP without NetworkManager. I've two interfaces: eth0 and wifi0. Starting NetworkManager doesn't show any notification icon in the top right in gnome and I believe

I have built my own wireless AP with Ubuntu 7.10 and an Atheros-based wireless card. My problem is that I can't access any of the Samba shares with my wireless clients...they can all search for the server, get prompted for a login then it just hangs and eventually times out. The same clients, when using their LAN ports to connect to the same server, are able to do everything--browse and

I seem to be able to lock my machine by going into wpa_cli and asking it to 'reassoc'. The reason for question mark after "hard" is that debug information (caused by wlandebug and athdebug) is being printed on the console. The only way to get machine's attention is to hold power button for 8 seconds. Note: manual reassociation is just the handy way to reproduce the problem

Hello, can anybody help me how to configure vlans? There are vlans: vlan2 vlan3 vlan30 Server has one nic - eth0. vlan2 should be dom0 eth0(peth0) for management Each vlan3 and vlan30 should be has its own bridge. How to make it? Br Peter _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello everyone, We are working on HTB with TC and would like some clarifications from your part. Our example is as follows. We have one HTB root class and two HTB classes attached to it, as in this figure : 1: HTB | | |

Respected Sir, I need to modify kvm-qemu migration code. Please tell me where i can find the code. -- *Thank youWith Regards:Aditya Bhardwaj* *Dept. of CSE * *NITTTR (Ministry of MHRD, Govt. of India)* *Sector-26, **Chandigarh - 160019 INDIA* https://scholar.google.co.in/citations?user=rEHhEnEAAAAJ&hl=en

Hi, We have a simple bridge setup but the ping (and other network traffic) does not work reliably. After tracing the code, it looks like a software bug. Since bridge software is been running by thousands of people. I guess I am wrong. Anyway, here is the problem. There are 2 boxes and each one has 2 interfaces, 1 ethernet and 1 wifi. STP is enabled for the bridge to avoid the loop. So the box 1

I have been playing around with 3 ath based FreeBSD boxes and seem to have got everything going via WPA and a common PSK for 802.11x auth. However, I want to have a bit more certainty about things working properly. What tools do people recommend for sniffing and checking a wireless network ? In terms of IDS, is there any way to see if people are trying to bruteforce the network ? I see

Hello list, I've posted here about this before, but I realise that it may have been assumed that the bridged vlans simply put a switch port in a blocking state and left my question ignored. So to recap. I have two tg3 interfaces named 'in' and 'out' and a bridge named 'br0' My vlan trunk is on the 'in' side of the network, and set as in.2, in.3 ... The

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a machine running 2.6.18-rc3 with a bridge config that looks like this: cr1:~# brctl show bridge name bridge id STP enabled interfaces vlan100 36b0.0007e90f40c1 yes eth0.100 eth2.100 vlan101 5dc0.0007e90f40c1 yes