similar to: EFI 64bit and Kernel 32 bit [redux]

Greetings, I have the following machine: https://dpaste.com/5BPA3F77F which I'm trying to boot in uefi. /etc/libvirt/qemu.conf looks like this: https://dpaste.com/B3SFHUY6R and the ovmf files exists in the path, see: # ll /usr/share/edk2-ovmf/OVMF_CODE.fd /usr/share/edk2-ovmf/OVMF_VARS.fd /usr/share/edk2-ovmf/OVMF_CODE.secboot.fd /usr/share/edk2-ovmf/OVMF_VARS.secboot.fd -rw-r--r-- 1 root

This is only lightly tested. In particularly I only tested that the non-secure-boot path still works. I didn't test it on RHEL 7.3 yet because I haven't got enough free disk space for these giant source *.ova files :-( Will try to give that a go later. Rich.

https://bugzilla.redhat.com/show_bug.cgi?id=1338083 Now that UEFI is fully open source the UEFI firmware can be included in Fedora. The location will be slightly different. These patches do a bit of code rearrangement and add the new paths. Rich.

Apologies if this has been gone over, but I believe I have checked the intertubes more than a bit..... I am using libvirt and have vms booting under an OVMF.fd to use an efi firmware. I can create vms, linux ubuntu, and they will boot up. However, everytime I reboot am I dropped into the default efi shell provide by the tianocore build. Then I must walk the FS to the booting efi app and run, in

First version was posted here: https://www.redhat.com/archives/libguestfs/2016-August/thread.html#00100 This is semantically the same as the first version. However I've split the patch up into two parts. In the first part, I factor out the UEFI paths so now they are created by the generator and written in the library and v2v/ directory directly, instead of the complex business of having a C

Greetings Michal, > Sent: Tuesday, October 13, 2020 at 2:51 PM > From: "Michal Privoznik" <mprivozn@redhat.com> > To: "daggs" <daggs@gmx.com>, libvirt-users@redhat.com > Subject: Re: unable to find any master var store for loader error > > Hey, > > I'll paste the interesting part of domain XML here so that it doesn't > get lost:

Add new paths for the Secure Boot variant of OVMF as found in Fedora. --- generator/UEFI.ml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/generator/UEFI.ml b/generator/UEFI.ml index 1ff3f84d2..bca3fa1ae 100644 --- a/generator/UEFI.ml +++ b/generator/UEFI.ml @@ -52,6 +52,12 @@ let firmware = [ "/usr/share/edk2/ovmf/OVMF_VARS.fd", []; + "x86_64", +

Thanks VERY MUCH for all the info and help! Apologies for the extreme delay. I got distracted by other threads that forced out this work to later date. Also some frustration as well. ;) I completely missed this update. Apologies and thanks Will be diving back into this shortly! On Thu, Mar 24, 2016 at 3:57 PM, Laszlo Ersek <lersek@redhat.com> wrote: > On 03/21/16 19:53, jsl6uy js16uy

Hello I have recently had to reinstall Centos 7.5 to on host computer. I have not be able to set-up qemu to support the q35 chip set. I have several virtual machines that require q35. This is not my first install, I have configured libvirt on many machines in the past, it just worked, it has not required any manual configuration. [root at sj aadmin]# /usr/libexec/qemu-kvm -machine help

Hello, I recently had to reinstall my operating system on my computer. I made a backup of the entire partition beforehand onto an external drive. Now I am trying to import a VM from that backup onto the newly installed system. What I've done so far: - copied over the qcow2 disk image - copied over the XML config file - copied over the OVMF files under /usr/share/edk2.git/ovmf-x64/

On Wed, 2017-02-08 at 20:13 +0300, Aleksei wrote: > I'm running libvirt in user session and libvirt creates VARS part of OVMF in ~/.config/libvirt/qemu/nvram/ > Check your xml, there should be lines like this: > <os> >     <type arch='x86_64' machine='pc-q35-2.7'>hvm</type> >     <loader readonly='yes'

Commit 889386f8c6088e57fd68f2bb6bf85f69ecfc6f6c removed most of them already, so remove the last ones, and the supporting code. --- generator/UEFI.ml | 6 ------ v2v/utils.ml | 1 - 2 files changed, 7 deletions(-) diff --git a/generator/UEFI.ml b/generator/UEFI.ml index 5161e28ee..1ff3f84d2 100644 --- a/generator/UEFI.ml +++ b/generator/UEFI.ml @@ -30,12 +30,6 @@ open Docstrings (* Order

Hello, I'm new to using libvirt. After a few days of installing and removing libvirt, virt-manager and a few others to get VT-d working with a virtual machine, I finally got the latest virt-manager and libvirt installed from source to get the most recent versions. However, when I start up virt-manager I get a popup saying "Unable to connect to libvirt; Verify that the 'libvirtd'

Hi! I have bootable (USB flash) disk, that _appears_ to be using syslinux. (the word syslinux is in the PBR, in the hexdump). How can I chainload it? The payload seems to be a file that I tried load with COMBOOT, COM32 etc, but nothing works (they report that the file is not in proper format, wrong magic number or simply crash). How to proceed? is there a 100% way to confirm that it is really

Hi, Didier Spaier wrote: > http://slint.fr/testing/slint64-14.1_syslinux.6.03/slint64-14.1_syslinux.6.03.img This looks like the content of an EFI system partition. Exactly what i need for experiments. Thanks a lot. (slint64-current-goofiboot.iso and slint64-current-efi-stub.iso were already in my collection.) It boots to "Slint installer for Slackware64-14.1" by:

Hi! I'm working currently on integration of UEFI/SecureBoot support into oVirt. And I have several questions about UEFI/SecureBoot support in libvirt. Can you please help me with them? For UEFI I add the following to the XML: <loader readonly="yes" secure="no" type="pflash"> /usr/share/OVMF/OVMF_CODE.secboot.fd </loader> <nvram

Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz> --- tools/firmware/ovmf-makefile | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/tools/firmware/ovmf-makefile b/tools/firmware/ovmf-makefile index 073ed44..efb4fb1 100644 --- a/tools/firmware/ovmf-makefile +++ b/tools/firmware/ovmf-makefile @@ -1,3 +1,6 @@ +XEN_ROOT = $(CURDIR)/../../.. +include

On Tue, 08 Jul 2014 15:54, H. Peter Anvin wrote: > >On 07/08/2014 11:26 AM, Ady wrote: >> >> It's interesting that you ask this, because every document related to >> newmkfloppyimg.sh specifically recommends adding: >> floppy c=$CYLINDERS s=$SECTORS h=$HEADS >> to the MEMDISK arguments. >> > >It would be important for floppies to know

This small series reintroduces OVMF support in Xen You can fetch working OVMF tree on: git://xenbits.xen.org/people/liuw/ovmf.git master Working changeset that can be sticked in Config.mk is: 8833370303d3bf3153760ee42760ef1b9b5c562 Note that VNC doesn''t work properly when using OVMF, but that''s not OVMF''s problem. This issue should be addressed in Xen and I''m

Hi Attilio I have updated to the upstream Xen and try to boot into OVMF bios. Instead of fetching the OVMF code from the git mirror, I just copy the OVMF bios to ovmf directory. I use the bios="ovmf" in the HVM config file. But, there is an error when I create the domain. root@gavin-laptop:~# xl create hvm_ubuntu.hvm Parsing config file /root/hvm_ubuntu.hvm WARNING: specifying