similar to: Nut-upsuser Digest, Vol 231, Issue 2

This is the first time that i had to use E-mail like forums i'm only hitting reply to mail NOT replay to all mails THIS IS upssched.conf # This file is auto-generated by openmediavault (https://www.openmediavault.org) # WARNING: Do not edit this file, your changes will get lost. CMDSCRIPT /usr/bin/upssched-cmd PIPEFN /run/nut/upssched.pipe LOCKFN /run/nut/upssched.lock AT COMMOK * EXECUTE

THIS IS systemctl list-units | grep UPS nut-driver at back-ups.service

As fast as I know, the standard NUT package will not command your power supply off unless customizations are made. Devices like Synology have an option to command the UPS off. What is acting as your NUT server? Your server PC? On Fri, Sep 6, 2024, 11:10 AM <nut-upsuser-request at alioth-lists.debian.net> wrote: > Send Nut-upsuser mailing list submissions to > nut-upsuser at

Hallo all. I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed. i tried the blazer_usb <http://www.networkupstools.org/docs/man/blazer_usb.html> driver and others but i didn't succeed. My lsusb says Bus 002 Device 005: ID 0925:1234 Lakeview Research Bus 004 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 004 Device 004: ID 0424:2228 Standard

hi: my testing server has two power supply and attach to two ups. one of the ups is connect to the server with usb. my upsmon.conf like below: # for two ups MONITOR ftups at localhost 1 monmaster nutmaster master MONITOR ftups at 10.1.1.2 1 monslave nutslave slave MINSUPPLIES 1 # for early shutdown NOTIFYFLAG ONBATT EXEC+WALL+SYSLOG NOTIFYFLAG ONLINE EXEC+WALL+SYSLOG NOTIFYCMD

Hello, I had running OpenMediaVault server with NUT 2.4.3 megatec_usb driver. After the OMV upgrade, NUT also upgraded to 2.6.4. I realised that megatec_usb removed in this version. So I have configured to use blazer_usb driver. However NUT behaves incorrectly after switching blazer_usb. System is being halted upon booted up. Is it possible to use megatec_usb driver in the new version? # NUT

Dear list, Can't make upssched notify me on event occured. OS: Debian, 2.6.26-1-amd64 Nut: 2.4.3-1.1squeeze1 UPS: Ippon Smart Winner 3000 connected via COM On event ( plug out the cord from UPS ) upsmon detect's status change to OB and gives WALL and syslog notify, but no script starting. In syslog no errors and no upssched process occured, just upsmon. There're no PIPE and LOCK

Hello all, I'm having problems with what I'm told should be a straightforward issue. The message in /var/log/daemon is: <quote> Feb 13 10:37:57 lupin upsmon[31324]: Master privileges unavailable on UPS [lupin1500AVR@localhost]

Here are the results from the output of upsc under different conditions from my Debian Test system with NUT 2.7.2 : Normal: ups.status: OL No wall power: ups.status: OB Runtime calibration (started from AP9630 web interface): ups.status: OB CAL So at this stage there is a difference! I then connected to my QNAP and set the UPS settings on the web interface to "Shutdown server if power

Hello, No ttyUSB* device under /dev however the new driver has detected the UPS, the nut services are able to start, just "upsc -l ups" sais unknown error and doesn't return any information. Could be due to the driver unable to detect number of battery packs as reported by the nut-driver.service startup? How can I fix that? root at omv:~# systemctl status nut-driver.service●

Greetings! I have successfully installed and configured nut package. All i want now is to power off ups. If i run upsmon -c fsd as root - everything goes fine, system and ups gracefully shutting down. If i unplug power cable from an ups, then system is down, but ups still on load. Any help would be appreciated. Debian Lenny x86 ups.conf [ippon] driver = megatec port = /dev/ttyS0

On Mar 13, 2015, at 6:30 PM, cinowell <cinowell at gmail.com> wrote: > Hello, > > I had running OpenMediaVault server with NUT 2.4.3 megatec_usb driver. After the OMV upgrade, NUT also upgraded to 2.6.4. I realised that megatec_usb removed in this version. So I have configured to use blazer_usb driver. However NUT behaves incorrectly after switching blazer_usb. System is being

OS: Openmediavault 7.4.7-1 NUT version: 7.0.4-1 Intalled from OMV plugin installer MY UPS: APC BX1200MI-GR connected through USB all of my UPS data are in this screenshot my problem that i need help with is as follow: so what's happening is if my gaming PC / router / switch are connected and power is down the UPS switches normally without issues from AC to battery and vice versa when the

> What do your configuration files look like? Setting MINSUPPLIES to 2 should work. You can run upsmon with a debug level of 3 or greater, and it will print the current and minimum "power value", which is what determines when to shut down. > > Also, if you don't want to wait for both UPSes to drain to the low battery state, you can set up a pair of dummy-ups drivers. I'm

[please keep the list CC'd - use "Reply All".] On Sep 14, 2015, at 10:29 PM, d tbsky <tbskyd at gmail.com> wrote: > > 2015-09-14 20:28 GMT+08:00 Charles Lepple <clepple at gmail.com>: >> "upsmon -c fsd" sets the FSD flag on all of the UPSes attached to upsd. > > my nut version is 2.7.3. as I said, "upsmon -c fsd" not only set

Hi all, We have recently bought an APC UPS and are in the process of setting up the NUT software to make use of it. We are experiencing a problem with the behaviour of the slave systems when the master system goes off line. Although the failure of our master system will (hopefully) be a rare event, and we hope not to experience too many power outages, it is possible (if unlikely) that both

How do you setup the debug options in WinNUT? Correct, it sets the POWERDOWNFLAG when it receives an FSD but only if it acts as a NUT MASTER (since the UPS is connected locally to the NUT MASTER and can issue a killpower). This is the default value and I did not care to change it because it won't be use on my Windows machine anyway as it is working as a NUT SLAVE. Thank you. Regards, Kevin

Hello dear all, I try to use NUT for windows (not WinNUT), and stuck with launching NOTIFYCMD. On any event marked as SYSLOG+WALL+EXEC syslog entry appears, popup window appears, but NOTIFYCMD script doesn't run. If I run upsmon.exe in cmd (i. e. not as a service) everything works fine. Here is my upsmon.conf: MONITOR central at 10.35.0.180 1 user password slave MINSUPPLIES 1 SHUTDOWNCMD

hello i think i found a bug i wanted nut to suspend to ram instead of powering off so i made a script that runs the commands but i ran into a problem i changed the shutdown command in upsmon.conf to my suspend script and i tested with upsmon -c fsd everything worked fine system went into suspend and i woke it backup by pressing the power button, now here is where i noticed some problems first one

Hello, Replaced UPS Kstar Micropower Micro 1200 (managed via blazer_usb) with https://www.njoy.ro/UPS/horus-plus-2000. The latter doesn't seem to be supported. 1. I tried blazer_usb and usbhid-ups. Any other suggestions? 2. What would be needed to get it supported by NUT? ======== HW ======== HP Microserver Gen 8 ======== UPS ======== Working:Kstar Micropower Micro